Sarix® Multi Pro Camera
Installation Manual
Document number:C6715M
Publication date:01/24/22
Sarix® Multi Pro Camera Installation Manual
Table of Contents
Overview 6
Camera Module 6
Camera Back View 6
Camera Top View 7
Surface Mount Adapter 8
Pendant Mount Adapter 9
In-Ceiling Mount Adapter 10
Outdoor Dome Cover 11
In-Ceiling Dome Cover 12
Pendant Wall Mount 13
Pendant NPT Mount 14
Preparing the Installation 15
Pre-Deployment In-Box Configuration 15
Pendant Mount Installation 16
Required Tools and Materials 16
Camera Package Contents 16
Pendant Mount Installation Steps 16
(Optional) Installing the Pendant Wall Mount 16
(Optional) Installing the NPT Mount Adapter 18
Installing the Pendant Mounting Adapter 20
Connecting Cables 21
(Optional) Configuring microSD Card Storage 23
Initializing a Camera Username and Password 24
Assigning an IP Address 24
Accessing the Live VideoStream 25
Installing the Sarix Multi Pro Camera Base to a Pendant Mount 25
Aiming the Sarix Multi Pro Camera 26
(Optional) Installing the IR Illuminator Ring 26
Installing the Pendant Mount Dome Cover 28
Surface Mount Installation 30
Camera Package Contents 30
Surface Mount Installation Steps 30
Installing the Surface Mount Adapter 30
Connecting Cables 35
(Optional) Configuring microSD Card Storage 37
Initializing a Camera Username and Password 38
Assigning an IP Address 38
Accessing the Live VideoStream 39
Installing the Sarix Multi Pro Camera Base to a Surface Mount 39
Aiming the Sarix Multi Pro Camera 40
(Optional) Installing the IR Illuminator Ring 40
C6715M | 01/24/22
2
Sarix® Multi Pro Camera Installation Manual
Installing the Surface Mount Dome Cover 42
In-Ceiling Mount Installation 44
Camera Package Contents 44
In-Ceiling Mount Installation Steps 44
Preparing the Camera for In-Ceiling Installation 44
(Optional) Cutting the Mounting Hole for the In-Ceiling Mount Adapter 45
(Optional) Attaching the Conduit Cable Entry Cover for Plenum Installations 45
Installing the In-Ceiling Mounting Adapter 47
Connecting Cables 49
(Optional) Configuring microSD Card Storage 51
Initializing a Camera Username and Password 52
Assigning an IP Address 52
Accessing the Live VideoStream 52
Installing the Sarix Multi Pro Camera Base to an In-Ceiling Mount 52
Aiming the Sarix Multi Pro Camera 53
Installing the In-Ceiling Mount Dome Cover 54
For More Information 55
Cable Connections 56
Connecting to Power, Audio, and External Devices 56
Pigtail Connector and Wires 56
Wiring Audio, I/O, and AUX Power 56
Focusing the Sarix Multi Pro Camera 57
Connection Status LED Indicator 58
Troubleshooting Network Connections and LED Behavior 58
Resetting to Factory Default Settings 59
Setting the IP Address Using the ARP/Ping Method 59
Cleaning 60
Dome Bubble 60
Body 60
Limited Warranty and Technical Support 61
C6715M | 01/24/22
3
Sarix® Multi Pro Camera Installation Manual
Important Safety Information
This manual provides installation and operation information and precautions for the use of this device.
Incorrect installation could cause an unexpected fault. Before installing this equipment read this manual
carefully. Please provide this manual to the owner of the equipment for future reference.
This Warning symbol indicates the presence of dangerous voltage within and outside the
product enclosure that may result in a risk of electric shock, serious injury or death to
persons if proper precautions are not followed.
This Caution symbol alerts the user to the presence of hazards that may cause minor or moderate
injury to persons, damage to property or damage to the product itself if proper precautions are not
followed.
Failure to observe the following instructions may result in severe injury or death.
l Installation must be performed by qualified personnel only, and must conform to all local codes.
l This product is intended to be supplied by a UL Listed Power Unit marked “Class 2” or “LPS” or
“Limited Power Source” with output rated:
l With IR LEDs: 24V AC ± 10%, 74 VA minimum, or 24 V DC ± 10%, 52 W minimum, PD-
9501GR/AC-NA-MSI, or PoE190-BT HPoE 802.BT single port injector 90W.
l Without IR LEDs: 24V AC ± 10%, 37 VA minimum, or 24 V DC ± 10%, 26 W minimum, or
25.5WPoE+, IEEE, 802.3at Type 2, PD-9001GR/AT/AC-MSI, PoEPlus (POE430-AT,
POE1236-AT, or POE2436-AT).
l Any external power supply connected to this product may only be connected to another Pelco
product of the same model series. External power connections must be properly insulated.
l Do not connect directly to mains power for any reason.
Failure to observe the following instructions may result in injury to persons or damage to the device.
l Do not install near any heat sources such as radiators, heat registers, stoves, or other sources of
heat.
l Do not subject the device cables to excessive stress, heavy loads or pinching.
l Do not open or disassemble the device. There are no user serviceable parts.
l Refer all device servicing to qualified personnel. Servicing may be required when the device has
been damaged (such as from a liquid spill or fallen objects), has been exposed to rain or moisture,
does not operate normally, or has been dropped.
l Do not use strong or abrasive detergents when cleaning the device body.
l Use only accessories recommended by Pelco.
Regulatory Notices
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with EN 60529 IP66 and IP67 rating (surface mount and pendant mount models).
C6715M | 01/24/22
4
Sarix® Multi Pro Camera Installation Manual
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and the receiver.
l Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
l Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by Pelco Corporation or parties
authorized by Pelco Corporation could void the user’s authority to operate this equipment.
To meet the requirements of the EN 50121-4 Railway Applications Standard, use an external power supply
or POE injector that is also compliant with EN 50121-4. Please contact Pelco for assistance regarding
supporting equipment.
Disposal and Recycling Information
When this product has reached the end of its useful life, please dispose of it according to your local
environmental laws and guidelines.
Risk of fire, explosion, and burns. Do not disassemble, crush, heat above 100 °C (212 °F), or incinerate.
European Union:
This symbol means that according to local laws and regulations your product should be disposed of
separately from household waste. When this product reaches its end of life, take it to a collection point
designated by local authorities. Some collection points accept products for free. The separate collection
and recycling of your product at the time of disposal will help conserve natural resources and ensure that it
is recycled in a manner that protects human health and the environment.
C6715M | 01/24/22
5
Sarix® Multi Pro Camera Installation Manual
Overview
Camera Module
Camera Back View
1. Lanyard anchor
The safety lanyard attaches to the anchor to prevent the camera from falling during installation.
2. IR ring cable connector
Accepts IR cable connection to power and control the IR illuminator ring.
3. Audio, I/O, Aux power connector
Accepts connection of the audio, I/O, and Aux power pigtail connector.
4. Ethernet port
Accepts an Ethernet connection to a network. Server communication and image data transmission
occurs over this connection. Also receives power when it is connected to a network that provides
Power over Ethernet.
C6715M | 01/24/22
6
Sarix® Multi Pro Camera Installation Manual
Camera Top View
1. Serial number tag
Device information, product serial number and part number label.
2. Camera heads
The multiple camera heads that can be moved, aimed and focused to monitor different scenes.
Note:
There may be three or four camera heads depending on your camera model.
3. Pan lock latch
Provides a locking mechanism for the image pan adjustment.
4. Firmware revert button
Resets the Sarix Multi Pro camera. For more information, see Resetting to Factory Default
Settings.
5. Camera mounting screws
Captive screws to fix the camera to the mounting adapter.
6. Tilt lock thumb screw
Provides a locking mechanism for the image tilt adjustment.
7. microSD card slot
Accepts a microSD card for onboard storage.
C6715M | 01/24/22
7
Sarix® Multi Pro Camera Installation Manual
Surface Mount Adapter
1. Lanyard to camera
Connects to the lanyard anchor on the camera base.
2. Cable entry hole (rear)
An entry hole for the cables required for camera operation.
3. Cable entry hole (side)
An entry hole for the cables required for camera operation.
4. Mounting holes
Mounting points for the mount adapter.
5. Lanyard to dome cover
Connects to the lanyard anchor on the dome cover.
C6715M | 01/24/22
8
Sarix® Multi Pro Camera Installation Manual
Pendant Mount Adapter
1. Alignment tab
An alignment tab is used to align with the lanyard clip on the dome cover.
2. Lanyard to dome cover
Connects to the lanyard anchor on the dome cover.
3. Cable entry hole
An entry hole for the cables required for camera operation.
4. Lanyard anchor
The safety lanyard attaches to the anchor to prevent the adapter from falling during installation.
5. Lanyard to camera
Connects to the lanyard anchor on the camera base.
C6715M | 01/24/22
9
Sarix® Multi Pro Camera Installation Manual
In-Ceiling Mount Adapter
1. Lanyard to camera
Connects to the lanyard anchor on the camera base.
2. Clamps
Spring loaded locking mechanisms that secure the camera to the mounting surface.
3. Cable entry hole and conduit cable entry cover
An entry hole for the cables required for camera operation.
4. Lanyard to dome cover
Connects to the lanyard anchor on the dome cover.
C6715M | 01/24/22
10
Sarix® Multi Pro Camera Installation Manual
Outdoor Dome Cover
1. Tamper resistant screws
Star-shaped captive screws to fix the dome cover to the base.
Note: There are 6 captive screws on the dome cover. Only 4 screws are shown in the figure
above.
C6715M | 01/24/22
11
Sarix® Multi Pro Camera Installation Manual
In-Ceiling Dome Cover
1. Tamper resistant screws
Star-shaped captive screws to fix the dome cover to the base.
2. Dome cover notch
Notch used to align the dome cover with the mounting adapter clip notch when installing the dome
cover.
C6715M | 01/24/22
12
Sarix® Multi Pro Camera Installation Manual
Pendant Wall Mount
1. Pendant wall mount
Camera mount for walls and other mounting surfaces.
2. Lanyard
Connects to the lanyard anchor on the mounting adapter.
3. Tamper resistant screws
Star-shaped captive screws to fix the mounting adapter to the pendant wall mount.
Note: There are 3 captive screws on the pendant mount. Only 2 screws are shown in the
figure above.
4.1. NPT pipe entry hole
A 3/4” NPT threaded hole for NPT pipe conduits.
C6715M | 01/24/22
13
Sarix® Multi Pro Camera Installation Manual
Pendant NPT Mount
Note: The NPT pipe and NPT-female to NPT-female adapter are not supplied by Pelco and should
be sourced separately. However, if you are using the NPT adapter (NPTA-1001), the lock nut is
included.
1. NPT-female to NPT-female adapter
Adapter used for mounting NPT adapter (NPTA-1001) to an NPT pipe.
2. Lock nut
Locking nut for securing the pendant NPT mount on the NPT pipe.
3. Tamper resistant screws
Star-shaped captive screws to fix the mounting adapter to the pendant NPT mount.
Note:
There are 3 captive screws on the NPT mount. Only 2 screws are shown in the figure
above.
4. Lanyard
Connects to the lanyard anchor on the mounting adapter.
5. NPT adapter
Used to mount the dome camera to NPT pipes.
C6715M | 01/24/22
14
Sarix® Multi Pro Camera Installation Manual
Preparing the Installation
Pre-Deployment In-Box Configuration
The camera comes equipped with an RJ45 configuration cable pre-installed for users that want to configure
camera settings before installing the camera. The RJ45 connector on the configuration cable is accessible
through the small flap on the side of the camera box for easy configuration before unpacking the camera.
We recommend that you do not exceed 3 hours of leaving your camera connected during in-box
configuration with ambient temperatures between 20 °C – 25 °C (68 °F – 77 °F).
1. Locate and open the flap on the side of the camera packaging.
2. Connect a network cable to the RJ45 plug on the configuration cable. The network cable must
provide PoE. IEEE 802.3af Class 3, to power the camera during configuration.
3. Connect to the camera using a video management system, the Camera Configuration Tool, or the
camera's web browser interface to configure the camera's settings. For more information about
connecting to the camera, see Assigning an IP Address, and Accessing the Live VideoStream.
4. Once you have finished making configuration changes, unplug the network cable.
Warning: Be careful when handling the camera after configuring it inside the packaging. The camera
may be hot when handling it or removing from the packaging immediately after in-box configuration.
C6715M | 01/24/22
15
Sarix® Multi Pro Camera Installation Manual
Pendant Mount Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
If you will be installing the NPT adapter (NPTA-1001), you will need:
l 1-1/2" NPT female to female adapter
l NPT pipe
Camera Package Contents
The Sarix Multi Pro camera has a variety of different mounting, dome cover, camera and accessory
options. The components for each Sarix Multi Pro camera will arrive in a camera package, a dome cover
package, a mounting adapter package, a mount package (for pendant mount cameras), and a metal ceiling
panel package (for in-ceiling cameras).
Ensure the camera package contains the following:
l Pelco Sarix Multi Pro Camera module. A 3- or 4-sensor camera module with 3 MP, 5 MP, or 4K (8
MP) resolution per sensor.
l Audio, external power, and I/O pigtail cable connector
l RJ45 CAT5E plugs (x2)
l RJ45 connector waterproof gland
Ensure the Pendant mount adapter package contains the following:
l Pendant mount adapter (IMD1-PMT)
l Installation instructions sheet
If you are installing the camera with the pendant wall mount, ensure the package includes the following:
l Pendant wall mount (WLMT-1001)
l Mounting template sticker
If you are installing the camera with the NPT mount, ensure the package includes the following:
l NPT mount (NPTA-1001)
l Lock nut
l Thread sealing tape
Ensure the dome cover package contains the following:
l Clear or smoked dome bubble and cover (IMD1-INCLD1 or IMD1-SPLD0)
If you are installing the camera with the optional IR illuminator, ensure the package includes the following:
l IR illuminator ring (IMD1-IR)
Pendant Mount Installation Steps
Complete the following sections to install the device.
(Optional) Installing the Pendant Wall Mount
Use the procedure below to install the pendant wall mount (WLMT-1001) for use with the Sarix Multi Pro
pendant mount adapter (IMD1-PMT).
C6715M | 01/24/22
16
Sarix® Multi Pro Camera Installation Manual
The dome camera must be mounted as instructed below or problems with moisture may arise and
will not be covered by the dome camera warranty.
1. Determine where the cables will enter the pendant wall mount.
l If the cables will be pulled from inside the mounting surface, use the cable entry hole at the rear
of the pendant wall mount.
l If the cables will be coming out of an external conduit pipe, use the 3/4” NPT pipe entry hole on
the bottom of the pendant wall mount.
2. Use the provided mounting template to drill four mounting holes into the mounting surface.
l If you are using the rear cable entry hole, also drill the cable entry hole into the mounting
surface.
3. Pull the required cables through the preferred cable entry hole on the pendant wall mount.
l If you are using the pipe entry hole, pull the cables through the pipe conduit then the wall mount.
Next, apply thread seal tape to the pipe conduit and screw it into the pipe entry hole.
4. Fasten the pendant wall mount to the mounting surface.
5. Tighten the wall mount screws to secure the wall mount to the wall.
6. Connect the safety lanyard from the mount to the anchor on the pendant adapter.
C6715M | 01/24/22
17
Sarix® Multi Pro Camera Installation Manual
7. Pull the cables through the pendant wall mount.
(Optional) Installing the NPT Mount Adapter
The dome camera must be mounted as instructed below or problems with moisture may arise and
will not be covered by the dome camera warranty.
If you are installing the Sarix Multi Pro camera with an NPT adapter (NPTA-1001), the dome camera must
be mounted on a 1-1/2” NPT female threaded wall or ceiling mounting bracket. The mounting bracket is not
included in the camera package.
Note: The NPT pipe and NPT-female to NPT-female adapter are not supplied by Pelco and should
be sourced separately. However, if you are using the NPT adapter (NPTA-1001), the lock nut is
included.
C6715M | 01/24/22
18
Sarix® Multi Pro Camera Installation Manual
1.1. Wrap the thread of the NPT adapter with the supplied thread-sealing tape to create a water tight seal
around the camera connection. There should be three to five turns around the entire threaded
surface.
When applying the thread-sealing tape, wrap the tape clockwise.
This will ensure the tape does not unravel when installing the mating parts together.
Tip
: Always apply thread-sealing tape to threaded mounts to help prevent the threads from
binding.
2. Loosely thread the lock nut onto the NPT adapter, then secure the NPT adapter into the wall or
ceiling mounting bracket.
3. Connect the safety lanyard from the mount to the anchor on the pendant adapter.
C6715M | 01/24/22
19
Loading...