Page 1
PRODUCT SPECIFICATION
camera solutions
IES0 Series Sarix® IP Rugged Fixed Dome
INDOOR/OUTDOOR, 0.5 MPX STANDARD DEFINITION DIGITAL CAMERA
Product Features
• Up to SVGA Resolution (800 x 600)
• Up to 30 Images per Second (ips) at All Resolutions
• Auto Back Focus for High Precision Focusing
• H.264, MPEG4, and MJPEG Compression
• Day/Night Capability
• Sensitivity Down to 0.03 lux
• Power over Ethernet (IEEE 802.3af) or 24 VAC
• Focus Button with Delay Enables Precision Focus Through Bubble
• Up to 2 Simultaneous Video Streams
• Electronic PTZ Through the Web Browser
• Local Storage (Micro SD) for Alarm Capture
• Motion Detection
(SHOWN WITH OPTIONAL IE-S SURFACE MOUNT ADAPTER)
• Bidirectional Half-Duplex Audio
• Open IP Standards
The
outdoor rugged fixed dome camera designed with industry-leading
image quality and high performance processing power. Its sturdy
metal design is vandal and tamper resistant and is designed for
worry-free use in a wide range of environmental operating
conditions.
The
spaces. The back box is plenum rated per 2008 NEC article
300.22(C)(2).
Sarix
imaging performance, delivering high resolution, advanced low-light
capabilities, consistent color science, and fast processing power.
The H.264 compression video files are considerably smaller, making
network video storage more affordable.
®
Sarix
IES0 Series
IES0 Series
technology defines the next generation of video security
is a standard definition network indoor/
is perfect for use in environmental air handling
Fixed Dome Camera
The
IES0 Series
include advance low-light technology and a camera in an indoor
enclosure that is ready to install. The day/night model has a
mechanical IR cut filter for increased sensitivity in low-light
installations. These cameras accept a wide range of megapixel
varifocal CS-mount lenses.
The
IES0 Series
streams can be compressed in MJPEG, MPEG-4, and H.264 formats
across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of
pictures (GOP) structures for additional bandwidth administration.
can be ordered with or without lenses. All models
supports two simultaneous video streams. The two
Built-In Analytics
The
Pelco Camera Sabotage
IES0 Series. This behavior detects contrast changes in the field of
view. An alarm is triggered if the lens is obstructed with spray paint,
a cloth, or covered with a lens cap. Any unauthorized repositioning of
the camera also triggers an alarm.
behavior is a standard feature of the
Web Interface
The
IES0 Series
setup and administration.
uses a standard Web browser for powerful remote
Window Blanking
Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The
four blanked windows. A blanked area will appear on the screen as
a solid gray window.
IES0 Series
supports up to
Systemization
The
IES0 Series
as Endura
later). The camera is also compatible with Digital Sentry NVs
(DS NVs), a full-featured video management software, which is
available as a free download at
four free Pelco IP licenses and allows for the management of video
from up to 64 cameras.
The
IES0 Series
third-party software. Pelco offers an application programming
interface (API) for interfacing with Pelco’s network cameras.
easily connects to Pelco IP and hybrid systems such
®
version 2.0 (or later) and Digital Sentry® version 4.3 (or
www.pelco.com.
features open architecture connectivity to
DS NVs includes
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2968 / REVISED 11-23-11
Page 2
TECHNICAL SPECIFICATIONS
GENERAL
Imaging Device 1/3-inch (effective)
Imager Type CMOS
Imager Readout Progressive scan
Maximum Resolution
800 x 600
Signal-to-Noise Ratio 50 dB
Auto Iris Lens Type DC drive
Electronic Shutter Range 1 ~ 1/100,000 sec
Wide Dynamic Range 60 dB
White Balance Range 2,000° to 10,000°K
Sensitivity f/1.2; 2,850°K; SNR >24 dB
Color (1x/33 ms) 0.5 lux
Color SENS (15x/500 ms) 0.12 lux
Mono (1x/33 ms) 0.25 lux
Mono SENS (15x/500 ms) 0.03 lux
Dome Attenuation
Clear Zero light loss
Smoked f/1.0 light loss
Construction Cast aluminum body with polycarbonate
bubble
Finish Light gray powder coat
Weight (without lens)
Unit 1.5 kg (3.3 lb)
Shipping 2.3 kg (5.0 lb)
Available Languages Chinese, English, French, German, Italian,
Portuguese, Russian, Spanish, and Turkish
ELECTRICAL
Port RJ-45 connector for 100Base-TX
Cable Type Cat5 or better for 100Base-TX
Power Input 18 to 30 VAC; 24 VAC nominal or
Power Consumption* <7 W, <40 W with heater operation
Current Consumption
PoE <140 mA maximum
†
24 VAC
Local Storage Micro SD
Alarm Input 10 VDC maximum, 5 mA maximum
Alarm Output 0 to 15 VDC maximum, 75 mA maximum
Service Port External 3-connector, 2.5 mm provides
Accessory Port Connects Pelco accessories
Audio Bidirectional: half duplex; line level/external
Compression G.711 PCM 64 kbit/s
*Does not include optional devices connected to the accessory port.
†
24 VAC is required for heater operation.
Auto MDI/MDI-X
PoE (IEEE 802.3af class 3)
<510 mA without heater operation;
<2.5 A maximum with heater operation
NTSC/PAL video output
microphone input; 600-ohm differential;
1 Vp-p max signal level
ENVIRONMENTAL
Operational Temperature –30° to 50°C (–22° to 122°F); PoE operates
between 0° to 50°C (32° to 122°F), 24 VAC
power is required for heater operation below
0°C (32°F)
Thermostat Operation Heater thermostatically controlled to operate
below <5°C (<41°F)
Operational Humidity 20% to 80%, noncondensing
Impact Resistance IK10++ per EN62262 (70J)
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
IN-CEILING
18.92
(7.45)
8.28
(3.26)
SURFACE MOUNT
(Mount Is Available as an Accessory)
19.51
(7.68)
15.95
(6.28)
PENDANT
(Mount Is Available as an Accessory)
19.38
(7.63)
20.32
(8.00)
MECHANICAL
Lens Mount CS mount, adjustable
Pan/Tilt Adjustment
Pan 368°
Tilt 160° (10° to 170°)
Rotate 355°
Ø 12.70
(5.00)
Page 3
TECHNICAL SPECIFICATIONS
VIDEO
Video Encoding H.264 Base profile, MPEG-4, and MJPEG
Video Streams Up to 2 simultaneous streams; the second
Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5,
Available Resolutions
Additional Resolutions 640 x 512, 640 x 352, 480 x 368, 480 x 272,
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),
Users
Unicast Up to 20 simultaneous users
Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
Pelco System Integration Endura 2.0 (or later) or
Open IP Integration Pelco IP camera API
Minimum System Requirements
Processor Intel
Operating System Microsoft® Windows® XP, Windows Vista®,
Memory 512 MB RAM
Network Interface Card 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or
Web Browser* Internet Explorer
Media Player
†
Pelco Media Player or QuickTime® 7.6.5 for
*Internet Explorer is not supported by Mac OS X 10.4.
†
This product is not compatible with QuickTime version 7.6.4 for Windows XP
or Windows Vista. If you have this version installed on your PC, you will
need to upgrade to QuickTime version 7.6.5.
stream is variable based on the setup of the
primary stream
4, 3, 2, 1 (dependent upon coding, resolution,
and stream configuration)
Resolution MJPEG H. 264 Base Profile MPEG-4
Aspect
MPx Width Height
Ratio
Maximum
IPS
0.5 800 600 4:3 30 ips 5.8 Mbps 25 ips 2.0 Mbps N/A N/A
0.3 640 480 4:3 30 ips 3.7 Mbps 30 ips 1.6 Mbps 30 ips 1.7 Mbps
0.1 320 240 4:3 30 ips 0.9 Mbps 30 ips 0.4 Mbps 30 ips 0.4 Mbps
320 x 256, 320 x 176, 4CIF (704 x 489 and
704 x 576), and CIF (352 x 240 and 352 x 288)
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4,
SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP
(client), SSH, SSL, SMTP, FTP, and
802.1x (EAP)
Digital Sentry 4.3 (or later)
®
, Pentium® 4 microprocessor, 1.6 GHz
or Mac® OS X 10.4 (or later)
32-bit pixel color resolution
®
7.0 (or later) or Mozilla®
Firefox® 3.5 (or later); Internet Explorer 8.0 (or
later) is recommended for configuring
analytics
Windows XP, Windows Vista, or QuickTime
7.6.4 for Mac OS X 10.4
Recommended
Bit Rate
Maximum
IPS
Recommended
Bit Rate
Maximum
IPS
Recommended
Bit Rate
Page 4
TECHNICAL SPECIFICATIONS
MODELS
IES0DN12-1 Sarix outdoor fixed dome network camera,
0.5 MPx, day/night, 2.8 ~ 12 mm varifocal
lens, clear dome
IES0DN-0 Sarix outdoor fixed dome network camera,
0.5 MPx, day/night, no lens, smoked dome
IES0DN-1 Sarix outdoor fixed dome network camera,
0.5 MPx, day/night, no lens, clear dome
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class A
• FCC, Class A
• UL /cUL Listed
• C-Tick
• Meets NEMA Type 4X and IP66 standards
OPTIONAL ACCESSORIES
IX-SC Service/monitor cable, 1.22 m (4 ft);
compatible with standard BNC connectors
POE20U560G Single port PoE injector
RECOMMENDED MOUNTS
IE-P Pendant mount adapter, light gray
IE-S Surface mount adapter, light gray
SWM-SR, IWM-SR* Wall mounts, light gray
IWM24-SR* Wall mount with cable feedthrough; includes
integral 24 VAC, 100 VA transformer; light
gray finish
PP350* Parapet mount, gray
PP351* Rooftop or horizontal surface mount, gray
*Requires the IE-P pendant mount adapter.
RECOMMENDED LENSES
13VD2.5-6 Varifocal lens, 2.5 ~ 6.0 mm, f/1.4 ~ 2.1
13VD2.8-12 Varifocal lens, 2.8 ~ 12.0 mm, f/1.4 ~ 2.9
13VD5-50 Varifocal lens, 5.0 ~ 50.0 mm, f/1.4 ~ 2.9
Field of View
in Degrees
2.5 mm
2.8 mm
5.0 mm
6.0 mm
8.0 mm
12.0 mm
50.0 mm
Horizontal 98 83 80
Vertical 55 63 64
Horizontal 89 74 71
Vertical 48 55 56
Horizontal 50 42 40
Vertical 28 32 32
Horizontal 42 36 34
Vertical 24 27 28
Horizontal 32 27 26
Vertical 18 20 20
Horizontal 21 18 17
Vertical 12 13 14
Horizontal 5 4 4
Vertical 3 3 3
Aspect Ratio
16:9 4:3 5:4
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada
International
www.pelco.com
Tel (800) 289-9100 Fax (800) 289-9150
Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
Pelco, the Pelco logo, and other trademarks associated with Pelco products
referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All
other product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2011, Pelco, Inc. All rights reserved.
Loading...