PRODUCT SPECIFICATION
IDS0 Series Sarix® IP Indoor Fixed Dome
0.5 MEGAPIXEL STANDARD DEFINITION INTEGRATED CAMERA
Product Features
• Up to SVGA Resolution (800 x 600)
• Up to 30 Images per Second (ips) at All Resolutions
• Optional CS-Mount Lenses
• Auto Back Focus for High Precision Focusing
• Easy, Quick, One-Handed Installation
• H.264, MPEG-4, and MJPEG Compression
• Color and Day/Night Capability
• Sensitivity Down to 0.03 lux
• Power over Ethernet (IEEE 802.3af) or 24 VAC
• Video Setup Jack and Focus Button Accessible with Dome Closed
• Up to 2 Simultaneous Video Streams
• Electronic PTZ Through the Web Browser
• Local Storage (Micro SD) for Alarm Capture
• Open IP Standards
• Motion Detection
• Audio Accessory Available
camera solutions
®
The
fixed dome camera designed with industry-leading image quality and
high performance processing power. Designed to install quickly and
easily, all of the post back-box installation and setup can be done
with one hand.
Sarix
imaging performance, delivering high resolution, advanced low-light
capabilities, consistent color science, and fast processing power.
The H.264 compression video files are considerably smaller, making
network video storage more affordable.
IDS0 Series
Sarix
technology defines the next generation of video security
is a standard definition network indoor
Fixed Dome Camera
The
IDS0 Series
with or without lenses installed. All models include advanced
low-light technology and a camera in an indoor enclosure that is
ready to install. The day/night model has a mechanical IR cut filter
for increased sensitivity in low-light installations. These cameras
accept a wide range of varifocal CS-mount lenses.
The
IDS0 Series
streams can be compressed in H.264, MPEG-4, and MJPEG formats
across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of pictures
(GOP) structures for additional bandwidth administration.
can be ordered in either color or day/night models
supports two simultaneous video streams. The two
Built-In Analytics
The
Pelco Camera Sabotage
IDS0 Series. This behavior detects contrast changes in the field of
view. An alarm is triggered if the lens is obstructed with spray paint,
a cloth, or covered with a lens cap. Any unauthorized repositioning
of the camera also triggers an alarm.
behavior is a standard feature of the
Web Interface
The
IDS0 Series
setup and administration.
uses a standard Web browser for powerful remote
Window Blanking
Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The
four blanked windows. A blanked area will appear on the screen as a
solid gray window.
IDS0 Series
supports up to
Video Systemization
The
IDS0 Series
as Endura
later). The camera is also compatible with Digital Sentry NVs
(DS NVs), a full-featured video management software, which is
available as a free download at
four free Pelco IP licenses and allows for the management of video
from up to 64 cameras.
The
IDS0 Series
third-party software. Pelco offers an application programming
interface (API) for interfacing with Pelco’s network cameras.
easily connects to Pelco IP and hybrid systems such
®
version 2.0 (or later) and Digital Sentry® version 4.3 (or
www.pelco.com
features open architecture connectivity to
. DS NVs includes
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2961 / REVISED 7-6-11
TECHNICAL SPECIFICATIONS
GENERAL
Imaging Device 1/3-inch (effective)
Imager Type CMOS
Imager Readout Progressive scan
Maximum Resolution
Signal-to-Noise Ratio 50 dB
Auto Iris Lens Type DC drive
Electronic Shutter Range 1 ~ 1/100,000 sec
Wide Dynamic Range 60 dB
White Balance Range 2,000° to 10,000°K
Sensitivity f/1.2; 2,850°K; SNR >24 dB
Color (1x/33 ms) 0.5 lux
Color SENS (15x/500 ms) 0.12 lux
Mono (1x/33 ms) 0.25 lux
Mono SENS (15x/500 ms) 0.03 lux
Dome Attenuation
Clear Zero light loss
Smoked f/1.0 light loss
Construction
Back Box Cast aluminum
Trim Ring Polycarbonate plastic
Bubble Acrylic plastic
Finish White
Weight (without lens)
Unit 0.9 kg (2.0 lb)
Shipping 2.7 kg (6.0 lb)
Available Languages Chinese, English, French, German, Italian,
ELECTRICAL
Port RJ-45 connector for 100Base-TX
Cable Type Cat5 or better for 100Base-TX
Power Input 18 to 34 VAC; 24 VAC nominal or
Power Consumption <6 W
Current Consumption
PoE <200 mA maximum
24 VAC <295 mA nominal; < 390 mA maximum
Local Storage Micro SD
Alarm Input 10 VDC maximum, 5 mA maximum
Alarm Output 0 to 15 VDC maximum, 75 mA maximum
Service Port External 3-connector, 2.5 mm provides
Accessory Port Connects Pelco accessories
800 x 600
Portuguese, Russian, Spanish, and Turkish
Auto MDI/MDI-X
PoE (IEEE 802.3af class 3)
NTSC/PAL video output
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
IN-CEILING
19.05
(7.50)
8.50
(3.33)
Ø 12.70
(5.00)
SURFACE MOUNT
(Mounting Ring Included)
20.19
(7.95)
Ø 12.70
(5.00)
PENDANT
(Mount Available as Accessory)
19.63
(7.73)
6.93
(2.73)
8.43
(3.32)
16.05
(6.32)
7.52
(2.96)
MECHANICAL
Lens Mount CS mount, adjustable
Pan/Tilt Adjustment
Pan 368°
Tilt 160° (10° to 170°)
Rotate 355°
ENVIRONMENTAL
Operational Temperature 0° to 50°C (32° to 122°F)
Operational Humidity 20% to 80%, noncondensing
19.38
(7.63)
Ø 12.70
(5.00)