Pelco IDM4012SS Specsheet
PRODUCT SPECIFICATION
IDM4012SS Mount
W
ALL MOUNT, STAINLESS STEEL, FOR SPECTRA
®
SPECIAL
camera solutions
TY DOMES
Product Features
• For Use with Spectra® Series Specialty Domes
• Can Also Be Used with Other Pendant Domes using 1.5-inch NPT
Threaded Pipe for Mounting
• Constructed of Type 304 Stainless Steel
• Mounts Directly to Vertical Load-Bearing Surface for Wall Mount
Applications
• Supports up to 75 Pounds (34 kg)
• Includes Cable Feedthrough Hole
The IDM4012SS wall mount is designed specifically for the Stainless
Steel and Pressurized Spectra
®
Series Dome Systems (Spectra III™ or
newer models). The mount is constructed of type 304 stainless steel
with a gray polyester powder coat finish making it ideal for harsh
environmental installations.
IDM4012SS can be attached directly to any vertical load-bearing
surface and is designed to support up to 75 pounds (34 kg). Conduit
accesses are available through the back mounting plate or through the
bottom of the mount where a flexible metal conduit fitting can be
installed. A gasket is provided for the back mounting plate to protect
the interior of the IDM4012SS.
The mount is threaded for 1.5-inch NPT pipe, and is compatible with
any Spectra
®
, DF5, or DF8 Series pendant back box.
6.50
(16.50)
4.50
(11.43)
2.0
(5.08)
8.0
(20.32)
6.00
(15.23)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
4X0.375 THRU
12.0 (30.47)
C2200 / REVISED 1-07
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
IDM4012SS Wall mount with cable feedthrough and
conduit access holes for use with Spectra
Stainless Steel and Pressurized dome
systems
GENERAL
Construction Type 304 stainless steel
Finish Gray polyester powder coating
Environment Indoor/outdoor
Mounting Method Secure with four stainless steel 5/16-inch
fasteners (not supplied)
Cable Entry Two holes on mounting plate for conduit
access and one hole on the bottom
of the mount for conduit access
Maximum Load 75 lb (34 kg)
Unit Weight 4.9 lb (2.22 kg)
Shipping Weight 7.0 lb (3.17 kg
OPTIONAL MOUNT ADAPTERS
®
CM400 Corner mount adapter
PA402 Pole mount adapter
PP300L/PP301L Parapet corner adapter
PP400 Parapet wall adapter
PP4348 Rooftop parapet adapter
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150
International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and Spectra are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
Spectra III is a trademark of Pelco, Inc.
©Copyright 2007, Pelco, Inc. All rights reserved.
Loading...