Pelco IDM4012SS User Manual

INSTALLATION/OPERATION

Stainless Steel

®

Wall Mount

IDM4012SS

C2200M (12/02)

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should be done only by qualified service personnel and conform to all
local codes.

2. Installation shall be done in accordance with all local and national electrical and mechanical
codes utilizing only approved materials.

3. Use only installation methods and materials capable of supporting four times the maximum
specified load.

4. Use stainless steel hardware to fasten the mount to outdoor surfaces.

2 C2200M (12/02)

DESCRIPTION

The IDM4012SS wall mount is designed specifically for the Stainless Steel Spectra III Series Dome
System. It features all stainless steel construction, and it has conduit access in the bottom and
back of the mount.

The IDM4012SS has the same mounting hole pattern as the IDM4018 and IWM Series mounts.

C2200M (12/02) 3