Pelco FUMS-GFX8, FUMS-GFX4 Specsheet

PRODUCT SPECIFICATION

transmission & power

FUMS-G Series Unmanaged Ethernet Switches

4- OR 8-PORT, 10/100/1000 MBPS, REQUIRING FSFP MODULE

Product Features

• 10/100/1000 Mbps Ethernet

• Electrical Port Supports Autonegotiation for 10/100/1000 Mbps,

Full-Duplex or Half-Duplex Data

• Optical Port Supports 1000 Mbps Full-Duplex Data

• Automatic Medium Dependent Interface/Medium Dependent

Interface Crossover (MDI/MDI-X) Operation

• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal

Control Equipment Environmental Standards

• Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules

for Specific Fiber Type, Distance, and Connector (Must Be Ordered
Separately)

• Voltage Transient Protection on All Power and Signal Input/Output

Lines Provides Protection from Power Surges and Other Voltage
Transient Events

• LED Status Indicators for Monitoring All Critical and Normal

Operating Parameters

• Hot-Swappable Rack Modules

• Stand-Alone or Rack-Mountable Modular Design

• Compliant with IEEE 802.3 Standards

FUMS-GFX8 FUMS-GFX4

The FUMS-G Series Ethernet 4- and 8-port unmanaged switches
are designed to transmit and receive 10/100/1000BASE-T(X) or
1000FX data through user-selectable small form-factor pluggable
(FSFP) transceivers (ordered separately). The plug-and-play design of
these FSFP modules ensures ease of installation requiring no
electrical or optical adjustments.

Modular in design, these models may be either wall- or
rack-mounted. LED indicators display operating status and critical
operating parameters. These models are designed to operate in
extreme environments. External power is required for the
FUMS-G Series units. The units can be powered with the
recommended FEXTPS fiber external power supply.

The optical transmission of Ethernet-compatible IP camera
surveillance video makes the FUMS-G Series ideal for
transportation, airport, and college campus applications.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3937 / REVISED 6-25-13

TECHNICAL SPECIFICATIONS

MODELS*

FUMS-GFX4 Ethernet unmanaged switch, requires FSFP

FUMS-GFX8 Ethernet unmanaged switch, requires FSFP

†

, 1000 Mbps, 4 data ports

modules

†

, 1000 Mbps, 8 data ports

modules

ELECTRICAL

Power Input 9 to 24 VDC
Power Consumption

FUMS-GFX4 12 W

FUMS-GFX8 17 W
MTBF >100,000 hours
LED Indicators Optical link, data;

Electrical link, data;
Power

DATA

Data Interface Ethernet
Data Rate 10/100/1000 Mbps, IEEE 802.3 compliant

Electrical port, full-duplex or half-duplex
Optical port, full-duplex

Operating Mode FSFP dependent

†

OPTICAL

Data Rate 1000 Mbps
Wavelength FSFP dependent
Number of Fibers FSFP dependent

†

†

MECHANICAL

Connectors

Optical FSFP dependent

Power Terminal block

Data FSFP dependent
Number of Rack Slots

FUMS-GFX4 1

FUMS-GFX8 2

*These switches do not support Internet Group Management Protocol

(IGMP) and should not be used as a core switch.

†

Requires selection of interchangeable FSFP modules (must be ordered
separately) for specific fiber type, distance, and connector. Refer to FSFP
Series Transceivers specification sheet for model number and description
of FSFP modules. Multimode fiber must meet or exceed fiber standard
ITU-T G.651. Single-mode fiber must meet or exceed fiber standard
ITU-T G.652.

†

†

GENERAL

Dimensions

FUMS-GFX4 15.5 × 13.5 × 2.8 cm

(6.1" D × 5.3" W × 1.1" H)

FUMS-GFX8 15.5 × 13.5 × 5.6 cm

(6.1" D × 5.3" W × 2.2" H)
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Weight

Unit <0.45 kg (1.00 lb)
Shipping 0.90 kg (2.00 lb)

CERTIFICATIONS/RATINGS

• CE, Class E

• FCC, Part 15

• UL Listed

•C-Tick

• IEEE 802.3

• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control

equipment environmental standards

RECOMMENDED ACCESSORIES

EURACK Rack-mount chassis for up to 14 fiber optic

modules, internal power supply, European

power cord
USRACK Rack-mount chassis for up to 14 fiber optic

modules, internal power supply, North

American power cord
FEXTPS Fiber external power supply with multiple

plug adaptors (North American, Australian,

United Kingdom, and European); 100 to

240 VAC, 50 to 60 Hz input, 9 VDC output

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community

Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All othe r product names and

Product specifications and availability are subject to change without no tice.

services are the property of their respective comp anies.

©Copyright 2013, Pelco, Inc. All rights reserved.