Pelco FUMS-FTX8, FUMS-FTX4, FUMS-FFX8, FUMS-FFX4TX4, FUMS-FFX4 Specsheet

PRODUCT SPECIFICATION

transmission & power

FUMS-F Series Unmanaged Ethernet Switches

4- OR 8-PORT, 10/100 MBPS, WITH AND WITHOUT FSFP MODULES

Product Features

• 10/100 Mbps Ethernet

– 10Base-T/100Base-TX Electrical Port

– 100Base-FX Optical Port

• Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps,

Full-Duplex or Half-Duplex Data

• Optical Port Supports 100 Mbps Full-Duplex Data

• Automatic Medium Dependent Interface/Medium Dependent

Interface Crossover (MDI/MDI-X) Operation

• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal

Control Equipment Environmental Standards

• Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules

for Specific Fiber Type, Distance, and Connector (Must Be Ordered
Separately)

• Voltage Transient Protection on All Power and Signal Input/Output

Lines Provides Protection from Power Surges and Other Voltage
Transient Events

• LED Status Indicators for Monitoring All Critical and Normal

Operating Parameters

• Hot-Swappable Rack Modules

• Stand-Alone or Rack-Mountable Modular Design

• Compliant with IEEE 802.3 Standards

FUMS-FFX8 FUMS-FTX4

The FUMS-F Series Ethernet 4- and 8-port unmanaged switches
are designed to transmit and receive 10/100 Mbps data over optical
fiber through user-selectable small form-factor pluggable (FSFP)
options; or 10 Mbps or 100 Mbps data over Cat5e or Cat6 electrical
cable. The electrical interface autonegotiates between 10 Mbps or
100 Mbps Ethernet rates without any adjustments. The optical
interface operates at a 100 Mbps Ethernet rate.

These units integrate four or eight independent 10/100 Mbps
channels in a single package. The FUMS-FFX4TX4, FUMS-FFX2TX2,
FUMS-FTX4, and FUMS-FFX8 require interchangeable FSFP modules
(ordered separately) for specific fiber type, distance, and connectors.

Modular in design, these models may be either wall- or
rack-mounted. LED indicators display operating status and critical
operating parameters. These models are designed to operate in
extreme environments. External power is required for the
FUMS-F Series units.Theunitscanbepoweredwiththe
recommended FEXTPS fiber external power supply.

The optical transmission of Ethernet-compatible IP camera
surveillance video makes the FUMS-F Series ideal for
transportation, airport, and college campus applications.

International Standards

Organization Registered Firm;

ISO 9001 QualitySystem

C3936 / REVISED 7-31-14

TECHNICAL SPECIFICATIONS

MODELS*

FUMS-FFX8 Ethernet unmanaged switch, requires FSFP

FUMS-FFX4TX4 Ethernet unmanaged switch, requires FSFP

FUMS-FTX8 Ethernet unmanaged switch, 10/100 Mbps,

FUMS-FFX4 Ethernet unmanaged switch, 100 Mbps,

FUMS-FFX2TX2 Ethernet unmanaged switch, requires FSFP

FUMS-FTX4 Ethernet unmanaged switch, requires FSFP

modules†, 100 Mbps, 8 FX optical ports

†

modules

, 10/100 Mbps, 4 TX electrical and

4 FX optical ports

8 TX electrical ports

4 FX optical ports

†

, 10/100 Mbps, 2 TX electrical and

modules
2 FX optical ports

modules†, 10/100 Mbps, 4 TX electrical ports

ELECTRICAL

Power Input 9 to 24 VDC
Power Consumption

FUMS-FFX4,
FUMS-FFX2TX2,
FUMS-FTX4 12 W

FUMS-FFX8,
FUMS-FFX4TX4,

FUMS-FTX8 17 W
Cable Cat5e or Cat6
MTBF >100,000 hours
LED Indicators Optical link, data;

Electrical link, data;
Power

DATA

Data Interface Ethernet
Data Rate 10/100 Mbps, IEEE 802.3 compliant
Operating Mode Electrical port, full-duplex or half-duplex

Optical port, full-duplex

OPTICAL

Data Rate 100 Mbps
Wavelength FSFP dependent
Number of Fibers FSFP dependent

†

†

MECHANICAL

Connectors

Optical FSFP dependent
Power Terminal block
Electrical RJ-45

Number of Rack Slots

FUMS-FFX4,
FUMS-FFX2TX2,
FUMS-FTX4 1

FUMS-FFX8,
FUMS-FFX4TX4,
FUMS-FTX8 2

†

GENERAL

Dimensions

FUMS-FFX4,
FUMS-FFX2TX2,
FUMS-FTX4 15.5 × 13.5 × 2.8 cm

(6.1" D × 5.3" W × 1.1" H)
FUMS-FFX8,
FUMS-FFX4TX4,
FUMS-FTX8 15.5 × 13.5 × 5.6 cm

(6.1" D × 5.3" W × 2.2" H)

Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Weight

Unit <0.45 kg (1.00 lb)
Shipping 0.90 kg (2.00 lb)

CERTIFICATIONS/RATINGS

• CE, Class E

• FCC, Part 15

• UL Listed

• C-Tick

• IEEE 802.3

• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards

RECOMMENDED ACCESSORIES

EURACK Rack-mount chassis for up to 14 fiber optic

USRACK Rack-mount chassis for up to 14 fiber optic

FEXTPS Fiber external power supply with multiple

modules, internal power supply, European
power cord

modules, internal power supply, North
American power cord

plug adaptors (North American, Australian,
United Kingdom, and European); 100 to
240 VAC, 50 to 60 Hz input, 9 VDC output

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community

*These switches do not support Internet Group Management Protocol

(IGMP) and should not be used as a core switch.

†

Requires selection of interchangeable FSFP modules (must be ordered
separately) for specific fiber type, distance, and connector. Refer to FSFP
Series Transceivers specification sheet for model number and description
of FSFP modules. Multimode fiber must meet or exceed fiber standard
ITU-T G.651. Single-mode fiber must meet or exceed fiber standard
ITU-T G.652.

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All other product names and

Product specifications and availability are subject to change without notice.

services are the property of their respective companies.

©Copyright 2014, Pelco, Inc. All rights reserved.