Pelco FT82011MSTR-1, FR82011SSTR-1, FR82011MSCR-1, FT82011SSTR-1, FT82011SSCR-1 Specsheet

PRODUCT SPECIFICATION

communication & power

FT82011/FR82011 Ethernet Media Converter

ONE 10BASE-T/100BASE-TX PORT AND ONE 100BASE-FX FIBER PORT

Product Features

• Ethernet Media Converter:

– One 10BASE-T/100BASE-TX Port

– One 100BASE-FX Port

• Converts 10BASE-T/100BASE-TX Ethernet Data to 100BASE-FX

Ethernet Data and Vice Versa

• Integrated Wavelength Division Multiplexing (WDM)

in a Single Fiber

• Designed for Point-to-Point Applications

• User-Selectable 10BASE-T/100BASE-TX Port Functions:

– Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and

Between Full-Duplex and Half-Duplex Modes

– 10 Mbps or 100 Mbps Selectable

– Full-Duplex or Half-Duplex Mode Selectable

– Enabling/Disabling of Flow Control

• Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent

Interface Crossover) Operation

• Link-Down Detection

• Compliant with IEEE 802.3, 802.3u, and 802.3x Standards

• Multimode Fiber Support for Distances up to 2 km

• Single-Mode Fiber Support for Distances up to 46 km

• Laser Diode for Transmission of Optical Signals

• Environmentally Hardened

• Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control

Equipment Environmental Standards

• No Performance Adjustments Required

• 12 VDC or 24 VAC Power Supply

• Stand-Alone and Rack-Mountable Modular Design

• LED Indicators for Monitoring of Optic Signal/Laser Status,

100BASE-FX Port Status Including Far End Fault Indication (FEFI),
10BASE-T/100BASE-TX Port Status, and Operating Power

The

FT82011/FR82011

100BASE-TX Ethernet data to 100BASE-FX Ethernet data and vice versa.

Designed for point-to-point applications, the

media converter converts 10BASE-T/

FT82011/FR82011

media converter provides one 10BASE-T/100BASE-TX port and one
100BASE-FX fiber port. The

FT82011

and

FR82011

media converters
are used in combination with one another to provide wavelength
compatibility. Using wavelength division multiplexing (WDM),
bidirectional data is transported in a single fiber.

The 100BASE-FX fiber port is automatically forced to full-duplex
100 Mbps operation. Networking functions for the 10BASE-T/
100BASE-TX port (RJ-45 twisted-pair copper port) are user­selectable by means of a rotary switch. Autonegotiation allows the
port to automatically negotiate between 10 Mbps and 100 Mbps
data rates and between full-duplex and half-duplex modes.
If autonegotiation is not desired, the port can be forced to specific
modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or
full-duplex mode, and the enabling/disabling of flow control.

C2653 / NEW 1-08

The auto MDI/MDI-X feature allows each RJ-45 port to connect to
either a straight-through or crossover RJ-45 cable.

The link-down detection feature of the media converters propagates a
link-down status among all 10BASE-T/100BASE-TX and 100BASE-FX
ports connected in the network when a 10BASE-T/100BASE-TX link or
100BASE-FX link goes down. As a result, all ports are disabled and
data transmission halts until the faulty link is restored.

Modular in design, the

FT82011

and

FR82011

units can be rack
mounted or can be used as stand-alone modules. Rack mounting is
accomplished using the RK5000 Series rack mount chassis. Stand­alone modules can be placed on a desktop or can be mounted to a wall.

ONE 10/100 Mbps

CONNECTION

FT82011

ONE

FIBER

FR82011

International Standards

Organization Registered Firm;

ISO 9001 Quality System

ONE 10/100 Mbps

CONNECTION

TECHNICAL SPECIFICATIONS

MODELS

Model Number

Fiber Optic

Connector

Type

Number

of Fibers

Multimode (62.5/125 µm)

FT82011MSTR-1 FR82011MSTR-1 ST 1 1310/850 nm 850/1310 nm 26 dB* 2 km (1.2 mi)

FT82011MSCR-1 FR82011MSCR-1 SC 1 1310/850 nm 850/1310 nm 26 dB* 2 km (1.2 mi)

Single-Mode (9/125 µm)

FT82011SSTR-1 FR82011SSTR-1 ST 1 1310/1550 nm 1550/1310 nm 28 dB 46 km (28.6 mi)

FT82011SSCR-1 FR82011SSCR-1 SC 1 1310/1550 nm 1550/1310 nm 28 dB 46 km (28.6 mi)

*When using 50/125 µm multimode fiber, subtract 3 dB from the optical power budget.

†

Maximum transmission distance is limited by fiber bandwidth.

‡

Maximum transmission distance is based on attenuation of 0.5 dB/km plus a 5 dB buffer for connector and splice losses.

Notes:

• Single-mode FC connector is available upon request. Contact the factory for additional information.

• For conformal coated models, replace the first letter F in the model number with the letter C. The conformal coated version
of FT82011MSTR-1, for example, is CT82011MSTR-1.

• For models with higher optical power budgets, contact the factory.

Wavelength

(Transmit/Receive)

Fiber Port A
(Transmitter

End)

Fiber Port B

(Receiver

End)

Optical

Power

Budget

Maximum

Transmission

Distance Supplied AccessoriesTransmitter End Receiver End

Regulated switching power supply

†

with multiple plug adapters
(North American, Australian,

†

United Kingdom, and European);
100-240 VAC, 50-60 Hz input,

‡

12 VDC output

‡

Note:

In extreme temperature
conditions, it is recommended that
an industrial-rated outdoor power
supply be used.

Wall clip for attachment of single
module to wall

PERFORMANCE

Switch Type Unmanaged Layer 2
Switch Method Store and forward
Data Rate 10/100 Mbps
Compliance IEEE 802.3, 802.u, 802.3x
Interface Auto MDI/MDI-X
Operating Mode Half-duplex or full-duplex
Address Table Size 1,024 MAC address entries with automatic

learning and aging

Quality of Service IEEE 802.1p priority, tag-based, 4 queues per

port, weighted fair queuing scheduling

Maximum Frame Size Untagged Ethernet frames up to 1,518 bytes

Tagged Ethernet frames up to 1,522 bytes

GENERAL

Operating Temperature -40° to 167°F (-40° to 75°C)
Input Power Requirements 12 VDC or 24 VAC, 0.50 A
LED Indicators Power

100BASE-FX Port Status (link/activity, FEFI)
Optic Fault (optic signal/laser status)
10BASE-T/100BASE-TX Port Status
(2 LEDs: link/activity and speed, duplex/
collision and speed)

Dimensions 8.75” D x 1.08” W x 4.81” H

(22.23 x 2.74 x 12.22 cm)
Unit Weight 1.6 lb (0.73 kg)
Shipping Weight 3.0 lb (1.36 kg)

MECHANICAL

Connectors

Rack Power/Alarm 1, 4-pin connector
Stand-Alone Power 1, 2-pin connector, screw terminal
Electrical 1, RJ-45, 10BASE-T/100BASE-TX
Fiber Optic 1, single-fiber ST or SC

CERTIFICATIONS

• CE, Class A

• UL Listed

• UL Listed to Canadian safety standards

• FCC, Class A

• C-Tick

• Complies with FDA requirements for Class 1 laser products

• Designed to meet NEMA TS 2 and Caltrans traffic signal control
equipment standards for ambient operating temperature, mechanical
shock and vibration, humidity with condensation, high-line/low-line
voltage conditions, and transient voltage protection (certification pending)

Note:

Conformal coating is required for operation in environments with

relative humidity above 95% (condensing).

OPTIONAL ACCESSORIES

WM5001-3U Wall mount base kit for single-width module

WM5001-3UEXP Wall mount expansion kit for single-width

RK5000-3U 19-inch rack mount chassis for 14 slots, no

RK5000PS-3U 19-inch rack mount chassis for 12 slots with

EPS5000-120 External rack power supply, 1 RU, dual 120 W

RK5001B-3U Blank filler panel, single width

RK5002B-3U Blank filler panel, double width

RK5001-1UEXP Adapter kit that allows a 3 RU single-width

module

power (3 RUs)

power (3 RUs)

power outputs

fiber module to be used in RK5100PS-5U rack
mount chassis

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

Tel: [phone] • FAX [phone]
Tel: [phone] • FAX [phone]

Pelco and the Pelco logo are registered trademarks of Pelco, Inc.

Specifications subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.