Pelco FS85011ASFC, FS85011AMST, FS85011ASSTEX, FS85011AMSTEX Specsheet

PRODUCT SPECIFICATION

video transmission

FS85011A Fiber Transmitter

SINGLE-CHANNEL DIGITALLY ENCODED VIDEO WITH BIDIRECTIONAL DATA

Product Features

• Designed for Use in Spectra III™ and Spectra® IV Domes and in the

Explosionproof Positioning System

ExSite

• 8-Bit Digitally Encoded Video for High-Quality Video Transmission

over a Single Fiber

• Bidirectional RS-422 Data Channel or Coaxitron® Communication

• Patent-Pending Transmission Technology Allowing Coaxitron Control

at Full-Distance Capabilities

• Compatible with the FR85011A/FR85011 Fiber Receiver

• Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber

• Multimode Fiber Support for Distances up to 6 km

• Single-Mode Fiber Support for Distances up to 46 km

• Laser Diode for Transmission of Optical Signals

• Exceeds All Requirements for the RS-250C Medium-Haul

Transmission Speciﬁcation

• Compatible with NTSC, PAL, and SECAM Video Standards

• No Performance Adjustments Required

• LED Indicator for Monitoring of Signal Status

The

FS85011A

ﬁber transmitter is designed for quick and easy installation into the back box of Spectra III™ and Spectra® IV domes or can be included as part of an ExSite® explosionproof positioning system at the factory. The

FS85011A

transmitter provides the ability to send one unidirectional composite video channel and one bidirectional RS-422 data channel over one optical ﬁber. In addition, patentpending technology provides the solution for allowing Coaxitron pan/tilt/zoom (PTZ) control data to be transmitted the full distance of the ﬁber. Available in multimode and single-mode versions, the

FS85011A

transmitter is compatible with the FR85011A/FR85011

receiver.

A jumper on the

FS85011A

transmitter provides the unique capability to select RS-422 or Coaxitron data communication. The selection of RS-422 data communication allows PTZ control of the Spectra III/ Spectra IV dome or of the ExSite positioning system. With Coaxitron control, PTZ control signals are transmitted over video coaxial cable from the controller to the FR85011A/FR85011 receiver. The receiver then transmits the Coaxitron data onto the ﬁber to the

FS85011A

transmitter. The Coaxitron data is transmitted from the controller to the Spectra III/Spectra IV dome or to the ExSite positioning system during the vertical blanking interval of the video signal.

The

FS85011A

transmitter operates using power supplied from the

Spectra III/Spectra IV dome or from the ExSite positioning system.

FS85011A FIBER TRANSMITTER WITH 6-INCH CABLE

ONE

ONE FIBER

FR85011A RECEIVER

FS85011A

TRANSMITTER

SPECTRA III /

SPECTRA IV

DOME

FS85011A

TRANSMITTER

SPECTRA III /

SPECTRA IV

DOME

SINGLE-CHANNEL VIDEO

AND RS-422 DATA APPLICATION

ONE FIBER

FR85011A RECEIVER

SINGLE-CHANNEL VIDEO

AND COAXITRON DATA APPLICATION

VIDEO

OUTPUT

RS-422

DATA

ONE

VIDEO

OUTPUT

COAXITRON

DATA

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C2606 / REVISION 6-10-09

TECHNICAL SPECIFICATIONS

MODELS

Model Number Fiber Optic

Connector

Type

Wavelength

(Video/Data)

Multimode (62.5/125 µm)

FS85011AMST

FS85011AMSTEX

FR85011AMSTR ST 1310/850 nm 26 dB

FR85011MSTR ST 1310/850 nm 20 dB

FR85011AMSTR ST 1310/850 nm 26 dB

FR85011MSTR ST 1310/850 nm 20 dB

Single-Mode (9/125 µm)

FS85011ASST

FS85011ASSTEX

FS85011ASFC

*Single-channel ﬁber optic video receiver/data transceiver.

†

When using 50/125 µm multimode ﬁber, subtract 3 dB from the optical power budget.

‡

Maximum transmission distance is limited by ﬁber bandwidth.

Maximum transmission distance is based on attenuation of 0.5 dB/km plus a 5 dB buffer for connector and splice losses.

Note:

For models with higher optical power budgets, contact the factory.

FR85011ASSTR ST 1310/1550 nm 28 dB 46 km (28.6 mi)

FR85011SSTR ST 1310/1550 nm 20 dB 30 km (18.6 mi)

FR85011ASSTR ST 1310/1550 nm 28 dB 46 km (28.6 mi)

FR85011SSTR ST 1310/1550 nm 20 dB 30 km (18.6 mi)

FR85011ASFCR FC 1310/1550 nm 28 dB 46 km (28.6 mi)

FR85011SFCR FC 1310/1550 nm 20 dB 30 km (18.6 mi)

Optical

Power

Budget

†

Maximum

Transmission

Distance Cable LengthFS85011A Transmitter Compatible Receiver*

6 km (3.7 mi)

‡

6 inches (15.24 cm)

‡

6 inches (15.24 cm)

‡

6 inches (15.24 cm)

6 ft (1.83 m)

Supplied Accessories

Fiber optic adapter (ST to ST, FC to ST, or FC to FC)

VIDEO

Number of Channels 1 Modulation Type Pulse code modulation, 8-bit resolution Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Bandwidth 6.5 MHz Gain Unity Differential Gain <2% Differential Phase <1° Tilt <1% Signal-to-Noise Ratio >60 dB (CCIR weighted)

DATA

Number of Channels 1 Data Communication RS-422, Coaxitron

GENERAL

Operating Temperature Refer to the Spectra III, Spectra IV, or ExSite

product speciﬁcation sheet as appropriate. Input Power Requirements 12 VDC, 160 mA LED Indicator Optic Fault Dimensions 2.9" L x 2.0" W

(7.37 x 5.08 cm) Unit Weight 0.08 lb (0.04 kg) Shipping Weight 1.0 lb (0.45 kg)

MECHANICAL

Connectors

Video/Data/Power 16-pin header Data Selection 2-pin header Fiber Optic ST for multimode ﬁber

ST or FC for single-mode ﬁber

CERTIFICATIONS

• CE, Class A

• FCC, Class A

• UL/cUL Listed

• C-Tick

• Complies with FDA requirements for Class 1 laser products

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

Pelco, the Pelco logo, Coaxitron, ExSite, and Spectra are registered trademarks of Pelco, Inc.

Product speciﬁcations and availability subject to change without notice.

Spectra III is a trademark of Pelco, Inc.