PRODUCT SPECIFICATION
FS85011A Fiber Transmitter
video transmission
SINGLE-CHANNEL DIGITALL
Product Features
• Designed for Use in Spectra III™ and Spectra® IV Domes and in the
®
Explosionproof Positioning System
ExSite
Y ENCODED VIDEO WITH BIDIRECTIONAL DATA
• 8-Bit Digitally Encoded Video for High-Quality Video Transmission
over a Single Fiber
• Bidirectional RS-422 Data Channel or Coaxitron
®
Communication
• Patent-Pending Transmission Technology Allowing Coaxitron Control
at Full-Distance Capabilities
• Compatible with the FR85011A/FR85011 Fiber Receiver
• Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
• Multimode Fiber Support for Distances up to 6 km
• Single-Mode Fiber Support for Distances up to 46 km
• Laser Diode for Transmission of Optical Signals
• Exceeds All Requirements for the RS-250C Medium-Haul
T
ransmission Specifi
cation
• Compatible with NTSC, PAL, and SECAM Video Standards
• No Performance Adjustments Required
• LED Indicator for Monitoring of Signal Status
The FS85011A fiber transmitter is designed for quick and easy
installation into the back box of Spectra III
or can be included as part of an ExSite
system at the factory
. The FS85011A transmitter provides the ability
™
and Spectra® IV domes
®
explosionproof positioning
to send one unidirectional composite video channel and one bidirectional RS-422 data channel over one optical fiber
. In addition, patentpending technology provides the solution for allowing Coaxitron
pan/tilt/zoom (PTZ) control data to be transmitted the full distance of
the fiber. A
vailable in multimode and single-mode versions, the
FS85011A transmitter is compatible with the FR85011A/FR85011
receiver.
A jumper on the FS85011A transmitter provides the unique capability
to select RS-422 or Coaxitron data communication. The selection of
RS-422 data communication allows PTZ control of the Spectra III/
Spectra IV dome or of the ExSite positioning system. With Coaxitron
control, PTZ control signals are transmitted over video coaxial cable
from the controller to the FR85011A/FR85011 receiver. The receiver
then transmits the Coaxitron data onto the fiber to the FS85011A
transmitter. The Coaxitron data is transmitted from the controller to
the Spectra III/Spectra IV dome or to the ExSite positioning system
during the vertical blanking interval of the video signal.
The FS85011A transmitter operates using power supplied from the
Spectra III/Spectra IV dome or from the ExSite positioning system.
FS85011A FIBER TRANSMITTER WITH 6-INCH CABLE
ONE
ONE FIBER
FR85011A
RECEIVER
FS85011A
TRANSMITTER
®
SPECTRA III /
SPECTRA IV
DOME
FS85011A
TRANSMITTER
SPECTRA III /
SPECTRA IV
DOME
SINGLE-CHANNEL VIDEO
AND RS-422 DATA APPLICATION
ONE FIBER
FR85011A
RECEIVER
SINGLE-CHANNEL VIDEO
AND COAXITRON DATA APPLICATION
VIDEO
OUTPUT
RS-422
DATA
ONE
VIDEO
OUTPUT
COAXITRON
DATA
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2606 / REVISION 6-10-09
TECHNICAL SPECIFICATIONS
MODELS
Model Number Fiber Optic
Connector
Type
Wavelength
(Video/Data)
Multimode (62.5/125 µm)
FS85011AMST
FS85011AMSTEX
FR85011AMSTR ST 1310/850 nm 26 dB
FR85011MSTR
FR85011AMSTR
FR85011MSTR
ST 1310/850 nm 20 dB
ST 1310/850 nm 26 dB
ST 1310/850 nm 20 dB
Single-Mode (9/125 µm)
FS85011ASST
FS85011ASSTEX
FS85011ASFC
*Single-channel fiber optic video receiver/data transceiver
†
When using 50/125 µm multimode fiber
‡
Maximum transmission distance is limited by fiber bandwidth.
§
Maximum transmission distance is based on attenuation of 0.5 dB/km plus a 5 dB buffer for connector and splice losses.
FR85011ASSTR
FR85011SSTR
FR85011ASSTR
FR85011SSTR
FR85011ASFCR
FR85011SFCR
.
, subtract 3 dB from the optical power budget.
Note: For models with higher optical power budgets, contact the factory
ST 1310/1550 nm 28 dB 46 km (28.6 mi)
ST 1310/1550 nm 20 dB 30 km (18.6 mi)
ST 1310/1550 nm 28 dB 46 km (28.6 mi)
ST 1310/1550 nm 20 dB 30 km (18.6 mi)
FC 1310/1550 nm 28 dB 46 km (28.6 mi)
FC 1310/1550 nm 20 dB 30 km (18.6 mi)
.
Optical
Power
Budget
†
†
†
†
Maximum
Transmission
Distance Cable LengthFS85011A Transmitter Compatible Receiver*
6 km (3.7 mi)
6 km (3.7 mi)
6 km (3.7 mi)
6 km (3.7 mi)
‡
6 inches (15.24 cm)
‡
6 inches (15.24 cm)
‡
‡
§
6 inches (15.24 cm)
§
6 inches (15.24 cm)
§
§
§
6 inches (15.24 cm)
§
6 inches (15.24 cm)
6 ft (1.83 m)
6 ft (1.83 m)
6 ft (1.83 m)
6 ft (1.83 m)
Supplied Accessories
Fiber optic adapter (ST to ST
, FC to ST, or FC to FC)
VIDEO
Number of Channels 1
Modulation Type Pulse code modulation, 8-bit resolution
Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Bandwidth 6.5 MHz
Gain Unity
Differential Gain <2%
Differential Phase <1°
Tilt <1%
Signal-to-Noise Ratio >60 dB (CCIR weighted)
DATA
Number of Channels 1
Data Communication RS-422, Coaxitron
GENERAL
Operating Temperature Refer to the Spectra III, Spectra IV, or ExSite
Input Power Requirements 12 VDC, 160 mA
LED Indicator Optic Fault
Dimensions 2.9" L x 2.0" W
Unit Weight 0.08 lb (0.04 kg)
Shipping Weight 1.0 lb (0.45 kg)
product specification sheet as appropriate.
(7.37 x 5.08 cm)
MECHANICAL
Connectors
Video/Data/Power 16-pin header
Data Selection 2-pin header
Fiber Optic ST for multimode fiber
ST or FC for single-mode fiber
CERTIFICATIONS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
• Complies with FDA requirements for Class 1 laser products
Pelco, Inc. W
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150
International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
orldwide Headquarters:
Pelco, the Pelco logo, Coaxitron, ExSite, and Spectra are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
Spectra III is a trademark of Pelco, Inc.
©Copyright 2009, Pelco, Inc. All rights reserved.
Loading...