PRODUCT SPECIFICATION
FEXTPS/ECPS-12VDC-3A
FEXTPS-48V
ECPS-48VDC-10A
ECPS-48VDC-5A
USRACK/EURACK
ECPS-12VDC-0.5A
transmission and power
EthernetConnect™ and IP/Analog Fiber Accessories
POWER SUPPLIES, RACK CHASSIS WITH INTERNAL POWER SUPPLY
Product Offerings
• USRACK/EURACK: Rack Chassis with Internal 9 VDC, 6.5 A Power
Supply, 14 Slots
• FXTPS: 9 VDC, 2 A, Power Supply Provides Power to Stand-Alone
Units
• ECPS-12VDC-0.5A: 12 VDC, 0.5 A, Power Supply Provides Power to
Stand-Alone Units
• ECPS-12VDC-3A: 12 VDC, 3 A, Power Supply Provides Power to
Stand-Alone Units
• FXTPS-48V: 48 VDC, 1.36 A, Power Supply Provides Power Over
Ethernet (PoE) Power to Stand-Alone Units
• ECPS-48VDC-5A: 48 VDC, 5 A, Power Supply, DIN Rail Mount,
Ideally Suited for PoE Applications
• ECPS-48VDC-10A: 48 VDC, 10 A, Power Supply, DIN Rail Mount,
Ideally Suited for PoE Applications
The Rack Chassis with Internal Power Supply, 9 VDC, 12 VDC,
and 48 VDC Power Supply Products are accessories that support
the IP/analog fiber and EthernetConnect
accessories provide a range of options to provide power to fiber
applications, power over copper (PoC) applications, and PoE
applications.
The 14-slot Rack Chassis allows for module installation in a
chassis that is rack mountable. The chassis contains an internal
9 VDC, 6.5 A power supply that provides power directly to all
modules installed in the chassis; no external power supply is
required. The power supply provides current limiting at each slot for
short circuit protection.
The 9 VDC, 12 VDC, and 48 VDC Power Supply Products provide
excellent voltage and current alternatives for powering stand-alone
IP/analog fiber and Ethernet modules. The 48 VDC, 5 A and 10 A
power supplies are ideally suited for PoE applications.
™
products. These
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3983 / NEW 3-10-14
TECHNICAL SPECIFICATIONS
RECOMMENDED POWER SUPPLIES AND HARDWARE
9 VDC POWER SUPPLY PRODUCT FEATURES
USRACK/EURACK RACK CHASSIS
• Output Voltage: 9 VDC
• Output Current: 6.5 A
• Input Voltage: 90 to 264 VAC
• Provides Fourteen 1-Inch Slots
• Rack Mount and Power for 14 Modules
• Automatic Current Limiting at Each Module Slot
(Not at the Power Supply Output)
• Voltage Transient Protection on all Power and Signal Input/Output Lines
Provides Unconditional Protection
• All Modules Installed in the Chassis are Hot-Swappable
•3 RU High
• IEC Cord Included: US, UK, EU, or AUS
• Optional RACK1B Single-Width Blank Filler Panel Covers the Front of an
Empty Chassis Slot
FEXTPS
• Output Voltage: 9 VDC
• Output Current: 2 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for EU and US Application
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Pin Heads Also Included for Europe, Australia, and UK
12 VDC POWER SUPPLY PRODUCT FEATURES
ECPS-12VDC-0.5A
• Output Voltage: 12 VDC
• Output Current: 0.5 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for EU and US Application
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Pin Heads Also Included for Europe, Australia, and UK
ECPS-12VDC-3A
• Output Voltage: 12 VDC
• Output Current: 3 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for EU and US Application
• Changeable Input Voltage Pin Head; US Pin Head Standard
• Pin Heads Also Included for Europe, Australia, and UK
48 VDC POWER SUPPLY PRODUCT FEATURES
FEXTPS-48V
• Output Voltage: 48 VDC
• Output Current: 1.36 A
• Input Voltage: 100 to 240 VAC
• Broad Input Voltage Range for EU and US Application
• Frequency Range of 50 to 60 Hz for US and EU Application
• For Use on Standalone PoE Models
• IEC Cord Included: US, UK, EU, or AUS
ECPS-48VDC-5A
• Output Voltage: 48 VDC
• Output Current: 5 A
• AC Input Voltage: 85 to 264 VAC, 47 to 63 Hz
• DC Input Voltage: 120 to 375 VDC
• Output Overvoltage Protection: <57 VDC
• Output Overcurrent Protection: >150% of Rated Load Current
• Output Short Circuit Protection: Hiccup Mode, Non-Latching
(Auto-Recovery When the Fault is Removed)
• Power Factor: >0.96 at 115 VAC, >90 at 230 VAC
• High Operating Efficiency: >90% at 115 VAC, >92% at 230 VAC
• Small Package for Limited Space Installations
• Mounts on 35 mm (1.4 in) DIN Rail in Accordance with EN60715
• Natural Convection Cooling: No Fans Required
ECPS-48VDC-10A
• Output Voltage: 48 VDC
• Output Current: 10 A
• AC Input Voltage: 85 to 264 VAC, 47 to 63 Hz
• DC Input Voltage: 120 to 375 VDC
• Output Overvoltage Protection: <57 VDC
• Output Overcurrent Protection: >150% of Rated Load Current
• Output Short Circuit Protection: Hiccup Mode, Non-Latching
(Auto-Recovery When the Fault is Removed)
• Power Factor: >0.96 at 115 VAC, >90 at 230 VAC
• High Operating Efficiency: >91% at 115 VAC, >93% at 230 VAC
• Small Package for Limited Space Installations
• Mounts on 35 mm (1.4 in) DIN Rail in Accordance with EN60715
• Natural Convection Cooling: No Fans Required
TECHNICAL SPECIFICATIONS
BLANK FILLER PANEL
9 VDC Rack Power Supply Products
MODELS
USRACK 9 VDC, 14-slot chassis, internal power supply
with US AC power cord, 19-inch, 3 RU rack
mount
EURACK 9 VDC, 14-slot chassis, inte rnal power supply
with UK, EU, or AUS AC power cord, 19-inch,
3 RU rack mount
ELECTRICAL
Input Voltage 90 to 264 VAC at 70 W maximum
Output Voltage 9 VDC
Accuracy ± 5% at 6.5 A at 75°C
Output Current 6.5 A
Fusing 1.25 A slow-blow (rack power supply) plug-in
modules individually electronically fused;
each power supply unit is individually fused.
MTBF >100,000 hours
Power Indicator Red LED
AC Line Cord Detachable, IEC-connected; US, UK, EU, or
AUS power cords available
MECHANICAL
Dimensions 48.2 x 19 x 17.5 cm
(19.0" D x 7.5" W x 6.9" H)
Rack Slots 14 slots available, 1-inch slots
Unit Weight 2.27 kg (5 lb)
Shipping Weight <3 kg (6.61 lb)
GENERAL
Operating Temp –40° to 75°C (–40° to 167°F)
Storage Temp –40° to 85°C (–40° to 185°F)
Relative Humidity 20% to 80%, noncondensing
Heat Generation 240 BTU
9 VDC Power Supply Product
MODEL
FEXTPS 9 VDC switching power supply
ELECTRICAL
Input Voltage Range 100 to 240 VAC
Input Frequency Range 50 to 60 Hz
Input Power Consumption <0.5 W (at no load)
Input Current 600 mA RMS maximum
Output Voltage 9 VDC
Output Load Range 2 A maximum
MECHANICAL
Input Pins Includes input voltage pin heads for US/North
America, Europe, Australia, and UK
Note: Refer to the Product Features section
for pictorial descriptions.
Dimensions 7.4 x 4.4 x 3.5 cm
(2.9" D x 1.7" W x 1.4" H)
Unit Weight 0.25 kg (0.55 lb)
Shipping Weight <0.45 kg (1 lb)
GENERAL
Operation Temperature 0° to 40°C (32° to 104°F)
Storage Temperature –10° to 70°C (14° to 158°F)
Relative Humidity 20% to 80%, noncondensing
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Meets NEMA TS-1/TS-2 Standards and the Caltrans Specification for
Traffic Signal Control Equipment
RECOMMENDED ACCESSORY
RACK1B Single-width blank filler panel covers the
front of an empty chassis slot
TECHNICAL SPECIFICATIONS
12 VDC Power Supply Products
MODELS
ECPS-12VDC-0.5A 12 VDC, 0.5 A switching power supply
ECPS-12VDC-3A 12 VDC, 3 A switching power supply
ELECTRICAL
Input Voltage Range 100 to 240 VAC
Input Frequency Range 50 to 60 Hz
Input Power Consumption <0.3 W (at no load)
Input Current
ECPS-12VDC-0.5A 0.3 A RMS maximum
ECPS-12VDC-3A 1 A RMS maximum
Output Voltage 12 VDC
Output Load Range
ECPS-12VDC-0.5A 0.5 A maximum
ECPS-12VDC-3A 3 A maximum
MECHANICAL
Input Pins Includes input pin heads for US/North
America, Europe, Australia, and UK
Note: Refer to the Product Features section
for pictorial descriptions.
Dimensions
ECPS-12VDC-0.5A 6.4 x 4.1 x 3.0 cm
(2.5" D x 1.6" W x 1.2" H)
ECPS-12VDC-3A 7.4 x 4.4 x 3.5 cm
(2.9" D x 1.7" W x 1.4" H)
Unit Weight
ECPS-12VDC-0.5A 0.25 kg (0.55 lb)
ECPS-12VDC-3A 0.25 kg (0.55 lb
Shipping Weight
ECPS-12VDC-0.5A <0.45 kg (1 lb)
ECPS-12VDC-3A <0.45 kg (1 lb)
48 VDC Power Supply Products
MODEL
FEXTPS-48V 48 VDC switching power supply
ELECTRICAL
Input Voltage Range 100 to 240 VAC
Input Frequency Range 50 to 60 Hz
Input Power Consumption <0.5 W (at no load)
Input Current 1.4 A RMS maximum
Output Voltage 48 VDC
Output Load Range 1.36 A maximum
MECHANICAL
Dimensions 11.5 x 5.3 x 3.8 cm
(4.5" D x 2.1" W x 1.5" H)
Unit Weight 0.32 kg (0.70 lb)
Shipping Weight <0.68 kg (1.50 lb)
GENERAL
Operation Temperature 0° to 40°C (32° to 104°F)
Storage Temperature –20° to 80°C (–4° to 176°F)
Relative Humidity 20% to 80%, noncondensing
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
GENERAL
Operation Temperature 0° to 40°C (32° to 104°F)
Storage Temperature –10° to 70°C (–4° to 158°F)
Relative Humidity 20% to 80%, noncondensing
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
TECHNICAL SPECIFICATIONS
48 VDC 5 A Power Supply Products
MODEL
ECPS-48VDC-5A 48 VDC switching power supply, 240 W
ELECTRICAL
Output
Output Voltage Trim Range
Typical VDC Minimum 48 VDC
Typical VDC Maximum 56 VDC
Typical Current 5 A
Efficiency >90% at 115 VAC, >92% at 230 VAC
Line Regulation <0.5% typical
Load Regulation <1% typical
Output Voltage Tolerance ±1% (initial set point tolerance from factory)
Hold-Up Time >20 ms at 115 VAC and 230 VAC (100% load)
Output Overvoltage Protection <57 VDC
Output Short Circuit Protection Hiccup mode, non-latching
Rated Overload Protection >150% of rated load current, hiccup mode,
Input
Rated Input Voltage Range
AC 85 to 264 VAC
DC 120 to 375 VDC
Rated Input Current at Vinput 115 VAC
Frequency Range 47 to 63 Hz
Maximum Inrush Current 115 VAC
(auto-recovery when the fault is removed)
non-latching (auto-recovery)
230 VAC
2.5 A 1.3 A
230 VAC
<35 A <35 A
MECHANICAL
Cooling Natural convection: requires 5.0 cm (2.0 in)
free space above and below and lateral
distance of 2.0 c m (0.79 in) from other units to
ensure adequate cooling
Cable Mount
Screw Terminal Blocks 12 to 20 AWG flexible or solid cable
Dimensions 12.1 x 8.5 x 12.4 cm
(4.8" D x 3.4" W x 4.9" H)
Unit Weight 0.96 kg (2.12 lb)
Shipping Weight <1.75 kg (3.86 lb)
GENERAL
Operating Temperature –25° to 80°C (–13° to 176°F)
Power Derating
Vertical Mounting >50°C, derate power by 2.5%/°C
Horizontal Mounting >40°C, derate power by 2.5%/°C
Storage Temperature –25° to 85°C (–13° to 185°F)
Relative Humidity <95%, noncondensing
CERTIFICATIONS/RATINGS
• CE, Class B
• FCC, Class B
• UL/cUL Recognized
TECHNICAL SPECIFICATIONS
48 VDC 10 A Power Supply Products
MODEL
ECPS-48VDC-10A 48 VDC switching power supply, 480 W
ELECTRICAL
Output
Output Voltage Trim Range
Typical VDC Minimum 48 VDC
Typical VDC Maximum 56 VDC
Typical Current 10 A
Efficiency >91% at 115 VAC, >93% at 230 VAC
Line Regulation <0.5% typical
Load Regulation <1% typical
Output Voltage Tolerance ±1% (initial set point tolerance from factory)
Hold-Up Time >20 ms at 115 VAC and 230 VAC (100% load)
Output Overvoltage Protection <57 VDC
Output Short Circuit Protection Hiccup mode, non-latching
Rated Overload Protection >150% of rated load current, hiccup mode,
Input
Rated Input Voltage Range
AC 85 to 264 VAC
DC 120 to 375 VDC
Rated Input Current at Vinput 115 VAC
Frequency Range 47 to 63 Hz
Maximum Inrush Current 115 VAC
(auto-recovery when the fault is removed)
non-latching (auto-recovery)
230 VAC
5 A 3.0 A
230 VAC
<35 A <35 A
MECHANICAL
Cooling Natural convection: requires 5.0 cm (2.0 in)
free space above and below and lateral
distance of 2.0 c m (0.79 in) from other units to
ensure adequate cooling
Cable Mount
Screw Terminal Blocks 12 to 20 AWG flexible or solid cable
Dimensions 12.1 x 14.4 x 11.9 cm
(4.8" D x 5.7" W x 4.7" H)
Unit Weight 1.37 kg (3.02 lb)
Shipping Weight <2.20 kg (4.85 lb)
GENERAL
Operating Temperature –25° to 75°C (–13° to 167°F)
Power Derating
Vertical Mounting Only >50°C, derate power by 2.5%/°C
>70°C, derate power by 5%/°C
Storage Temperature –25° to 85°C (–13° to 185°F)
Relative Humidity <95%, noncondensing
CERTIFICATIONS/RATINGS
• CE, Class B
• FCC, Class B
• UL/cUL Recognized
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliate s. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
Product specifications and availability are subje ct to change without notice.
services are the property of their respective companies.
©Copyright 2014, Pelco, Inc. All righ ts reserved.
Loading...