PRODUCT SPECIFICATION
FD2-IRV SERIES
camera solutions
FD2 Series Indoor Fixed Dome
18 TO 32 VAC (REVISION A), 1/3-INCH CCD, 650 TVL, WDR, DAY/NIGHT, IR OPTIONS
Product Features
• 650 TV Lines
• 0.1 Lux Sensitivity (No IR), Zero Lux (with IR)
®
1/3-Inch Super HAD CCD II™ 960H Imager or Sony 1/3-Inch
• Sony
EXview HAD CCD II Imager (depending on model)
• Digital Signal Processing (DSP)
• 4 Camera Options:
– Wide Dynamic Range (WDR) and Day/Night with Digital Slow
Shutter (DSS) High Resolution
– Infrared (IR) Illumination Day/Night High Resolution
– True Day/Night High Resolution
– Color High Resolution
• IR Compensation (IR Models Only)
• Fixed or Varifocal Lens
• Autosensing Power; 18 to 32 VAC/12 VDC with Internal
Synchronization (Revision A)
®
• Remote Access Capability Through Coaxitron
(Based on Model)
• Alarm Output (Based on Model)
• Shipped Completely Assembled, Easy to Install
The FD2 Series is Pelco’s general purpose indoor fixed dome camera.
It is designed to provide superior picture quality over a wide range of
conditions. The camera’s attractive size, combined with its numerous
features, makes it the ideal camera for most indoor applications.
The FD2 Series dome camera integrates a camera and lens package
into a small, versatile indoor enclosure that can be mounted directly to a
ceiling or wall. The FD2 Series features a 3-axis camera and lens
positioning system that is capable of a wide variety of pan and tilt angles.
The FD2 Series offers four high resolution camera options suitable for
a variety of indoor environments:
• Wide Dynamic Range and Day/Night DSS Dome: Features a
high resolution (650 TVL), day/night camera with an auto iris
varifocal lens. This camera uses WDR sensor technology to
provide 120 dB dynamic range. This technology helps capture
excellent visual images even when there are extremely different
illumination conditions within a surveillance area. The camera can
also switch automatically from color to mono mode in a low-light
environment by removing the IR cut filter, and digital slow shutter
(DSS) allows for extreme low-light capability. These make this
camera an ideal solution for applications with difficult and
unbalanced lighting conditions that require extremely high
sensitivity and dynamic range.
• IR Illumination High Resolution Dome: Features a high
resolution (650 TVL) color camera with fixed or varifocal lens. The
IR camera option is equipped with high performance
IR compensation. This camera can be set manually to adjust
IR illumination levels, enabling customers to change the levels of
luminance and contrast according to the shooting environment. This
function reduces the blooming effect and delivers clear images
when objects get closer to the camera. The IR camera option uses a
group of IR LEDs for supplemental lighting. This allows the camera
to function under zero lux illumination when IR is on, creating an
effective IR illumination distance up to 25 meters. Application
examples include environments with difficult lighting conditions
that need a supplemental IR light source.
• True Day/Night High Resolution Dome: Features a high
resolution (650 TVL) day/night camera with auto iris and varifocal
lens. The camera uses a movable IR cut filter to switch between
color and black-white (B-W) modes in changing environmental
lighting conditions and when the need for low-light sensitivity is
realized. Application examples include environments that require
color images during the day but use monochrome images at night.
• Color High Resolution Dome: Features a high resolution
(650 TVL) color camera with auto iris, electronic day/night
functions, and fixed or varifocal lens. This camera is suitable for
general applications in most fixed lighting conditions. Its full
features ensure that images are clear and crisp at all times under
consistent light.
In addition, WDR models in the FD2 fixed dome series feature WDR
sensor and processing technology, ensuring the best picture quality
even in challenging environments. Other models in this series features
ATR technology, which can help provide dynamic range by selecting
different gamma profiles.
The FD2 Series has built-in analytical capabilities such as privacy
zones, motion detection, and camera titles that adds to its functionality
and makes it suitable for most applications.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4009 / REVISED 5-16-14
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Image Sensor Sony® 1/3-Inch EXview HAD CCD II
Signal Processing Sony DSP, Effio-E
Effective Pixels
NTSC
PAL
Scanning Area 5.58 (H) mm x 4.67 (V) mm
Scanning System
NTSC
PAL
Scanning Frequency
NTSC
PAL
Synchronization Internal Internal Internal
Horizontal Resolution 650 TVL 650 TVL 650 TVL
Minimum Illumination f/2.0; 2,850°K; 30 IRE
IR Cut Filter Fixed Fixed Yes, D/N switch
Dynamic Range Gamma selectable (ATR) Gamma selectable (ATR) Gamma selectable (ATR)
IR Illumination Distance — — —
IR Sensitivity — — —
Low-Light Technology Digital day/night Digital day/night ICR, digital day/night
Electronic Shutter Range Auto/Manual 1/60 ~ 1/10,000 sec
Video Output 1.0 Vp-p, NTSC/PAL composite, 75 ohms,
White Balance ATW/Manual/Push/Push
Signal-to-Noise Ratio 48 dB (>52 dB by parameter adjustment) 48 dB (>52 dB by parameter adjustment) 48 dB (>52 dB by parameter adjustment)
Lens Fixed Varifocal Varifocal
F-Number f/2.0 f/1.2 f/1.2
Focal Length 2.8 mm (FD2-F3 Series)
Focus Range ∞ to 1.2 m (3.9 ft) ∞ to 0.3 m (1 ft) ∞ to 0.3 m (1 ft)
Horizontal
Angle of View
Vertical
Angle of View
Adjusting Angle
Panning Range
Tilting Range
Rotation Range
Noise Reduction 2D 2D 2D
Motion Detection Included (4 areas) Included (4 areas) Included (4 areas)
Privacy Zones Included (8 areas) Included (8 areas) Included (8 areas)
Digital Zoom — — —
Image Stabilization — — Included
Camera Titles — — Included
Scene Learning/Analytics — — —
Remote Access — — —
Alarm Out — — 1
976 (H) x 494 (V)
976 (H) x 582 (V)
(0.22 x 0.18 inch)
525 lines, 2:1 interlace
625 lines, 2:1 interlace
Horizontal, 15.734 kHz
Vertical, 59.94 Hz
Horizontal, 15.625 kHz
Vertical, 50.00 Hz
Color 0.1 lux
Mono 0.1 lux
Auto/Manual 1/50 ~ 1/10,000 sec
BNC connector
Lock/User1/User2/Anti CR
3.6 mm (FD2-F4 Series)
90° at 2.8 mm (FD2-F3 Series)
72° at 3.6 mm (FD2-F4 Series)
80° at 2.8 mm (FD2-F3 Series)
52° at 3.6 mm (FD2-F4 Series)
±180°
+75° to 0°
±180°
FD2-F Series
Fixed Lens Models
™
™
Sony 1/3-Inch EXview HAD CCD II Sony 1/3-Inch EXview HAD CCD II
Sony DSP, Effio-E Sony DSP, Effio-E
976 (H) x 494 (V)
976 (H) x 582 (V)
5.58 (H) mm x 4.67 (V) mm
(0.22 x 0.18 inch)
525 lines, 2:1 interlace
625 lines, 2:1 interlace
Horizontal, 15.734 kHz
Vertical, 59.94 Hz
Horizontal, 15.625 kHz
Vertical, 50.00 Hz
f/1.2; 2,850°K; 30 IRE
Color 0.1 lux
Mono 0.1 lux
Auto/Manual 1/60 ~ 1/10,000 sec
Auto/Manual 1/50 ~ 1/10,000 sec
1.0 Vp-p, NTSC/PAL composite, 75 ohms,
BNC connector
ATW/Manual/Push/Push
Lock/User1/User2/Anti CR
2.8 to 10.5 mm 2.8 to 10.5 mm
101.8° at 2.8 mm wide zoom;
27.4° at 10.5 mm telephoto zoom
73.2° at 2.8 mm wide zoom;
20.6° at 10.5 mm telephoto zoom
±180°
+75° to 0°
±180°
FD2-V Series
Varifocal Lens Models
True Day/Night Varifocal Lens Models
FD2-DV Series
976 (H) x 494 (V)
976 (H) x 582 (V)
5.58 (H) mm x 4.67 (V) mm
(0.22 x 0.18 inch)
525 lines, 2:1 interlace
625 lines, 2:1 interlace
Horizontal, 15.734 kHz
Vertical, 59.94 Hz
Horizontal, 15.625 kHz
Vertical, 50.00 Hz
f/1.2; 2,850°K; 30 IRE
Color 0.1 lux
Mono 0.05 lux
Auto/Manual 1/60 ~ 1/10,000 sec
Auto/Manual 1/50 ~ 1/10,000 sec
1.0 Vp-p, NTSC/PAL composite, 75 ohms,
BNC connector
ATW/Manual/Push/Push
Lock/User1/User2/Anti CR
101.8° at 2.8 mm wide zoom;
27.4° at 10.5 mm telephoto zoom
73.7° at 2.8 mm wide zoom;
20.6° at 10.5 mm telephoto zoom
±180°
+75° to 0°
±180°
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Image Sensor Sony 1/3-Inch EXview HAD CCD II Sony 1/3-Inch Super HAD CCD II 960H
Signal Processing Sony DSP, Effio-E Sony DSP, Effio-P
Effective Pixels
NTSC
PAL
Scanning Area 5.58 (H) mm x 4.67 (V) mm
Scanning System
NTSC
PAL
Scanning Frequency
NTSC
PAL
Synchronization Internal Internal
Horizontal Resolution 650 TVL 650 TVL
Minimum Illumination f/1.2; 2,850°K; 30 IRE
IR Cut Filter Yes, D/N switch Yes, D/N switch
Dynamic Range Gamma selectable (ATR) 120 dB Dual-scan WDR
IR Illumination Distance 25 m —
IR Sensitivity >40% at 850 nm, peak response —
Low Light Technology ICR and LEDs, digital day/night ICR, DSS
Electronic Shutter Range Auto/Manual 1/60 ~ 1/10,000 sec
Video Output 1.0 Vp-p, NTSC/PAL composite, 75 ohms,
White Balance ATW/Manual/Push/Push
Signal-to-Noise Ratio 48 dB (>52 dB by parameter adjustment) 48 dB (>52 dB by parameter adjustment)
Lens Varifocal Varifoca l
F-Number f/1.2 f/1.2
Focal Length 2.8 to 10.5 mm 2.8 to 10.5 mm
Focus Range ∞ to 0.3 m (1 ft) ∞ to 0.3 m (1 ft)
Horizontal
Angle of View
Vertical
Angle of View
Adjusting Angle
Panning Range
Tilting Range
Rotation Range
Noise Reduction 2D 3D
Motion Detection Included (4 areas) Included (4 areas)
Privacy Zones Included (8 areas) Included (15 sizeable windows)
Digital Zoom — Included, 255X (through camera menu only)
Image Stabilization Included Included
Camera Titles Included Included
Scene Learning/Analytics — Included
Remote Access — Coaxitron and RS-485
Alarm Out 1 1
976 (H) x 494 (V)
976 (H) x 582 (V)
(0.22 x 0.18 inch)
525 lines, 2:1 interlace
625 lines, 2:1 interlace
Horizontal, 15.734 kHz
Vertical, 59.94 Hz
Horizontal, 15.625 kHz
Vertical, 50.00 Hz
Color 0.1 lux
Mono (with IR) 0.0 lux
Auto/Manual 1/50 ~ 1/10,000 sec
BNC connector
Lock/User1/User2/Anti CR
101.8° at 2.8 mm wide zoom;
27.4° at 10.5 mm telephoto zoom
73.7° at 2.8 mm wide zoom;
20.6° at 10.5 mm telephoto zoom
±180°
+60° to 0°
±180°
FD2-IRV Series
IR Illumination
Varifocal Lens Models
976 (H) x 494 (V)
976 (H) x 582 (V)
6.0 (H) mm x 5.0 (V) mm
(0.24 x 0.20 inch)
525 lines, 2:1 interlace
625 lines, 2:1 interlace
Horizontal, 15.734 kHz
Vertical, 59.94 Hz
Horizontal, 15.625 kHz
Vertical, 50.00 Hz
f/1.2; 2,850°K; 30 IRE
Color (20 ms for PAL or 17 ms for NTSC) 0.13 lux
Color (500 ms) 0.03 lux
Mono (20 ms for PAL or 17 ms for NTSC) 0.05 lux
Mono (500 ms) 0.00004 lux
NTSC Auto, 1/60 to 1/100,000 sec;
PAL Auto, 1/50 to 1/100,000 sec;
NOTE: Slow shutter support is 2X to 128X.
1.0 Vp-p, NTSC/PAL composite, 75 ohms,
BNC connector
ATW/Manual/Push/Push
Lock/User1/User2/Anti CR
101.8° at 2.8 mm wide zoom;
27.4° at 10.5 mm telephoto zoom
73.7° at 2.8 mm wide zoom;
20.6° at 10.5 mm telephoto zoom
±180°
+75° to 0°
±180°
FD2-DWV Series
True Day/Night, WDR, DSS
Varifocal Lens Models
Manual, 1/60 to 1/10,000 sec
Manual, 1/50 to 1/10,000 sec
TECHNICAL SPECIFICATIONS
11.60 (4.57)
10.60
(4.17)
Ø 9.50
(3.74)
8.40
(3.31)
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All oth er product names and
services are the property of their respect ive companies.
Product specifications and availability are subject to change without notice.
©Copyright 2014, Pelco, Inc. All rights reserved.
MODELS
Camera Type Lens Type NTSC PAL
Color, High
Resolution
Color, High
Resolution
Color, High
Resolution
Fixed, 2.8 mm — FD2-F3-6X
Fixed, 3.6 mm FD2-F4-6 FD2-F4-6X
Varifocal, 2.8 to 10.5 mm FD2-V10-6 FD2-V10-6X
IR Illumination Varifocal, 2.8 to 10.5 mm FD2-IRV10-6 FD2-IRV10-6X
True Day/Night,
ICR Switch
Varifocal, 2.8 to 10.5 mm FD2-DV10-6 FD2-DV10-6X
True Day/Night,
WDR, DSS,
Varifocal, 2.8 to 10.5 mm FD2-DWV10-6 FD2-DWV10-6X
ICR Switch
GENERAL
Back Box Construction ABS plastic
Bubble Type Lightly obscured
Weight Unit Shipping
FD2-F, FD2-IRV 0.30 kg (0.66 lb) 0.60 kg (1.32 lb)
FD2-V, FD2-DV, FD2-DWV 0.31 kg (0.68 lb) 0.61 kg (1.34 lb)
Power Requirement*
NTSC 18 to 32 VAC 60 Hz/12 VDC +10% to –15%
PAL 18 to 32 VAC 50 Hz/12 VDC +10% to –15%
Power Consumption
FD2-F, FD2-V, FD2-DV 2.5 W
FD2-IRV 4 W
FD2-DWV 4.5 W
Power Connector 2-pin terminal block with screw terminals
Video Connector BNC
Alarm Output 2-pin terminal block with screw terminals
*Suggested installations (Revision A):
For outdoor environmental conditions from –30° to 50°C (–22° to 122°F),
use only an AC power supply source (18 to 32 VAC).
For indoor or outdoor applications with ambient temperatures of
0° to 50°C (32° to 122°F), use 12 VDC power, or an AC power supply source
(18 to 32 VAC).
ELECTRICAL
(available on some models)
ENVIRONMENTAL
Operating Temperature –10° to 50°C (14° to 122°F)
Storage Temperature –20° to 60°C (–40° to 140°F)
Operating Humidity 20% to 80%, noncondensing
Storage Humidity 20% to 90%, noncondensing
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
RECOMMENDED POWER SUPPLIES
TF2000 Power supply for one camera, 20 VA
MCS Series Multiple camera power supply, indoor
OPTIONAL ACCESSORIES
FD-SC Dome camera service cable to BNC,
1 meter (3.3 ft), 2-pin
TW4001PC Passive twisted wire transmission for use in
unshielded twisted pair (UTP) installations
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
Loading...