Pelco EA4348, EWM Specsheet
PRODUCT SPECIFICATION
®
Esprit
CORNER, PEDESTAL, POLE, AND WALL
Series Mounts
camera solutions
Product Features
• Low Cost
• For Use with Esprit® Series Integrated Positioning Systems in Corner,
Pedestal, Pole, and Wall Applications
• Can Also Be Used in Parapet Applications When Used with
Appropriate Mount Adapter
• Constructed of Aluminum
• Features Cable Feedthrough
• Easy to Install
• For Indoor or Outdoor Applications
Esprit
®
Series
mounts include the EWM wall mount, EPM pole
The
mount, ECM100 corner mount, EPP pedestal adapter, and the EA4348
EWM-to-Legacy® adapter.
All mounts are aluminum and feature a feedthrough opening to conceal
electrical cables. They have a gray, polyester powder coat finish.
The EWM wall mount is the essential component in this series. It can
be used as a stand-alone mount for wall applications or in conjunction
with the EPM pole mount, ECM100 corner mount, or PP100 parapet
mount. When used with the EA4348 adapter, the EWM can also be
mounted to a Legacy PP300L, PP301L, or PP4348 parapet mount.
ESPRIT SYSTEM MOUNTED ON EWM WALL MOUNT
WITH EPM POLE ADAPTER
EWM WALL MOUNT
The EWM wall mount is easy to install and requires no special tools.
The Esprit integrated positioning system attaches directly to the EWM
with three stainless-steel screws and washers. The mount can be
attached to any vertical load-bearing surface with four fasteners
suitable for the mounting surface (not supplied). Stainless-steel nuts
and washers are supplied for attaching the EWM to the mounting studs
on the pole, corner, and parapet mounts.
The EPP pedestal adapter is designed to adapt an Esprit integrated
positioning system to pedestal mounts, such as the PM2000 or
PM2010. Three stainless-steel nuts and washers are provided to
secure the Esprit system to the adapter.
The EA4348 EWM-to-Legacy adapter can also be used to retrofit
corner-, pole-, and parapet-mounted Legacy systems with Esprit
integrated positioning systems. The EA4348 will make any CM400,
PA402, PP400, PP300L/PP301L, and PP4348 Legacy mount compatible
with the EWM wall mount.
C238 / REVISED 1-06
EPM POLE ADAPTER
EPP PEDESTAL ADAPTER
EA4348 LEGACY
ECM100 CORNER ADAPTER
International Standards
Organization Registered Firm;
ISO 9001 Quality System
ADAPTER
TECHNICAL SPECIFICATIONS
MODELS
®
ECM100 Esprit
corner mount; for use with EWM wall
mount
EPP Esprit pedestal adapter; for use with PM2000/
PM2010 pedestal mount
EPM Esprit pole adapter; for use with EWM wall
mount
EWM Esprit wall mount
EA4348 EWM-to-Legacy® adapter; for use with PP300L,
PP301L, and PP4348 parapet mounts
GENERAL
Construction Aluminum
Finish Gray polyester powder coat
Mounting Method
ECM100 Attached to mounting surface with eight
fasteners (not supplied)
EPP Attached to a compatible mount (such as the
PM2000/PM2010) with four fasteners
(not supplied)
EPM Attached to a pole with three stainless-steel
straps (supplied). Straps fit 3-inch (7.62 cm) to
8-inch (20.32 cm) diameter pole.
EWM Attached to the mounting surface with four
fasteners (not supplied)
EA4348 Attached to Legacy corner, pole, or parapet
mount with four fasteners (nuts and split lock
washers supplied with Legacy mount)
Cable Entry Cable feeds through the EWM mount into the
Esprit system; ECM100, EPA, and EPM mounts
have a cable feedthrough hole in center
Maximum Load
EPP Not applicable
ECM100 75 pounds (34 kg)
EPM 100 pounds (45 kg)
EWM 30 pounds (14 kg)
EWM with EA4348 30 pounds (14 kg)
Weight Unit
Shipping
EPP 0.6 lb (0.3 kg) 1.0 lb (0.45 kg)
ECM100 3.0 lb (1.4 kg) 6.0 lb (2.7 kg)
EPM 2.2 lb (1.0 kg) 4.0 lb (1.8 kg)
EWM 1.5 lb (0.7 kg) 3.0 lb (1.4 kg)
EA4348 1.2 lb (0.5 kg) 3.0 lb (1.4 kg)
OPTIONAL MOUNT ADAPTERS
PP100 Parapet (wall) mount. Use with EWM wall mount
PP300L, PP301L Parapet (corner) mount. Use with EWM wall
PP4348 Parapet (rooftop) mount. Use with EWM wall
mount and EA4348 adapter
mount and EA4348 adapter
3.58
(9.09)
Ø3.00
ECM100
8.00
(20.32)
Ø0.37 (0.94), 8X
0.60 (1.52)
2.00 (5.08)
4.75
(12.07)
6.00
(15.24)
4.75
1.0 X 0.375
(2.54 X 0.95)
(12.06)
6.00
(15.24)
(13.97)
(0.64)
1.50
(3.81)
0.25
EWM
(36.96)
EPP
0.8 X 0.375
(2.03 X 0.95)
Ø 0.150 (0.381) 3X
3.00 (7.62) B.C.
14.55
4.75
(12.06)
EPM
2.46
(6.25)
3.08
(7.82)
7.00
(17.78)
6.15
(15.62)
2.75
(6.99)
Ø 3.00
(7.62)
4.88 (12.39)
2X 3.25
(8.25)
2X 2.375
9.75 (24.76)
(6.03)
4X Ø0.343 (0.87)
8.00
(20.32)
2X 2.25
(5.71)
Ø2.00 (5.08)
2X 2.375
(6.03)
4X Ø0.312 (0.79) HOLE
FOR ZHO3-1107-1705
EA4348
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
5.50
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, Esprit, and Legacy are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2006, Pelco, Inc. All rights reserved.
Loading...