Pelco E716SS, E716S, E706VS, E706V, E706-16S Specsheet

...

PRODUCT SPECIFICATION

E706 Series Enclosure

SPECIALTY, OUTDOOR, DUST-TIGHT

camera solutions

Product Features

• 6-Inch Inside Diameter

• Easily Installed and Serviced

• For Use in Small-Particle and Dusty Environments

• Stainless Steel Mounting Straps Allow Enclosure to be Easily

Positioned on, or Removed from, Mounting Device

• Options include Heater, Blower, Air Funnel Kit, Sun Shield and

Sun Visor

• Aluminum or Stainless Steel Construction

The

E706 Series

dust-tight enclosure permits the use of cameras in small-particle and dusty environments. The enclosure is constructed from aluminum and is also available in stainless steel for use in corrosive atmospheres.

The enclosure is engineered for ease of installation and serviceability. Spring clip fasteners permit quick removal of the front and rear plates and have security features for using padlocks and safety wire for additional security protection. The camera is mounted on a removable camera sled for easy access to electrical connections, including those for accessory equipment. Cable entry is through two adjustable cable glands located conveniently on the rear plate.

E706-16 ENCLOSURE

ENCLOSURE WITH SUN SHROUD

7.00

(17.78)

6.00

(15.24)

3.50

(8.89)

ADJUSTABLE CRADLE MOUNT

1/4-20 PEM NUT 2X

Accessories to help maintain proper operating temperature within the enclosure under many conditions include purge ﬁttings, heater, blower, air funnel, sun shroud and sun visor.

The

E706 Series

can be used in ﬁxed mount applications or with a

medium duty pan/tilt, such as our PT570 Series.

MODEL

E706-16

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

A B C D

Ø6.62

17.25 (16.81)

(43.82)

ALL OTHERS ARE INCHES.

7.62

Ø6.00

(19.35)

(15.24)

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C415 / REVISED 10-15-10

TECHNICAL SPECIFICATIONS

MODELS

E706-16 Dust-tight enclosure, 6-inch (15.24 cm)

E706-16P Same as E706-16 except with purge ﬁttings E706-16PS Same as E706-16P except Type 304 stainless

E706-16S Same as E706-16 except Type 304 stainless

Note:

Models with purge ﬁttings require a ﬁltered compressed air supply (up

to 35 psi at 10 cfm) to provide positive pressure internal air circulation. Two 1/4-inch NPT female ﬁttings provided.

inside diameter x 16-inch (40.64 cm) length

steel construction

MECHANICAL

Camera Mounting Removable sled with multiple mounting holes Cable Entry Two adjustable, sealable glands: One with

0.375" (0.95 cm) inside diameter and one with

0.50" (1.27 cm) inside diameter

Viewing Window 0.187" (4.74 mm) thick Lucite

SAR acrylic Latches Draw latch with security features Maximum Camera and Lens Size

With or Without Blower and/or Heater Kits:

3.50" H x 4.25" W x 13.25" L (8.89 x 10.79 x 33.66 cm) or

13.25" L x 4.8" diameter (33.66 x 12.20 cm)

GENERAL

Construction Aluminum or Type 304 stainless steel Finish Gray polyester powder coat Weight Unit Shipping

E706-16 6.72 lb (3.05 kg) 9 lb (4.07 kg) E706-16P 6.98 lb (3.17 kg) 10 lb (4.53 kg) E706-16PS 12.35 lb (5.60 kg) 15 lb (6.79 kg) E706-16S 12.17 lb (5.52 kg) 15 lb (6.79 kg)

OPTIONAL ACCESSORIES

Blower Kit

Heater Kit

Sun Shroud

Visor

Other

BK700 Continuous duty blower kit; provides

BK700/220 Same as BK700 except 8 cfm, 230 VAC,

BK700/24 Same as BK700 except 19 cfm, 24 VAC,

HK706-1 Thermostatically controlled heater kit

HK706-2 Same as HK706-1 except 24 VAC HK706-3 Same as HK706-1 except 230 VAC E716S Sun shroud E716SS Same as E716S except Type 304

E706V Sun visor for E706 series E706VS Same as E706V except Type 304

E700A Air funnel kit; provides positive

RECOMMENDED MOUNTS

Ceiling/ Pedestal

Wall

Pipe/Pole

EM1009U/ Medium duty ceiling/pedestal mount; EM1015U maximum load 40 lb (18.14 kg)

MM22 Medium duty ceiling/pedestal mount;

EM1900U Medium duty wall mount; maximum

EM22 Medium duty wall mount; maximum

EM1109 Medium duty pedestal mount for pipe/

EM2000/ Medium duty mount for vertical/ EM2200 horizontal pipe/pole; maximum load

10 cfm of internal air circulation; 120 VAC, 60 Hz operation, 4 W

50 Hz, 9 W

3 W

for E706 enclosure, 120 VAC, 80 W; activates on at 40°F (4°C) and off at 60°F (15°C)

stainless steel construction

pressure air ﬂow across the face of front window to prevent and remove dust accumulation; installation and ﬁltered compressed air supply with minimum of 35 psi at 30 cfm required

maximum load 40 lb (18.14 kg)

load 40 lb (18.14 kg)

pole; maximum load 40 lb (18.14 kg)

40 lb (18.14 kg)

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

RECOMMENDED PAN/TILT

PT570 Series Medium duty pan/tilt; maximum load 40 lb (18.14 kg)

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its afﬁliates. All other product names and services are the property of their respective companies. Product speciﬁcations and availability are subject to change without notice.