Pelco DD53M22-X User Manual
OPERATION/PROGRAMMING
®
Spectra III™ SE Series
Models DD53M22 & DD53M22-X
C2443M-D (11/05)
OPERATION/PROGRAMMING MANUAL
MODELS DD53M22 & DD53M22-X
22X LowLight™ MONOCHROME TECHNOLOGY
4 C2443M-D (11/05)
CONTENTS
WELCOME ................................................................................................................................................................................................ 7
GETTING STARTED .......................................................................................................................................................................... 7
HOW TO OPERATE YOUR DOME SYSTEM .............................................................................................................................................. 8
ACCESSING MAIN MENU (PRESET 95) .......................................................................................................................................... 9
CM6700/CM6800 ................................................................................................................................................................... 9
KBD200A/KBD300A (DIRECT MODE ONLY) ........................................................................................................................... 9
CM9500 .................................................................................................................................................................................. 9
CM9740/CM9760/CM9770/CM9780 .................................................................................................................................... 9
KBD4000/KBD4002 ............................................................................................................................................................... 10
MPT9500 ............................................................................................................................................................................... 10
NET300/NET350/NET4001A ................................................................................................................................................. 10
WS5050 ................................................................................................................................................................................. 10
VCD5000 ................................................................................................................................................................................ 10
QUICK START GUIDE – SYSTEM SETUP .................................................................................................................................................11
LANGUAGE .............................................................................................................................................................................................. 13
SYSTEM INFORMATION.......................................................................................................................................................................... 14
DISPLAY SETUP ....................................................................................................................................................................................... 15
LABEL POSITION .............................................................................................................................................................................16
DOME SETTINGS ..................................................................................................................................................................................... 17
CAMERA ......................................................................................................................................................................................... 17
TYPE OF LIGHTING ................................................................................................................................................................ 17
AUTO FOCUS ......................................................................................................................................................................... 17
ZOOM LIMIT .......................................................................................................................................................................... 18
ZOOM SPEED ......................................................................................................................................................................... 18
LOW LIGHT LIMIT .................................................................................................................................................................. 18
ADVANCED CAMERA SETTINGS ................................................................................................................................................... 19
SHUTTER SPEED .................................................................................................................................................................... 19
AGC LIMIT ............................................................................................................................................................................. 19
AUTO IRIS .............................................................................................................................................................................. 20
AUTO SHARPNESS ................................................................................................................................................................ 21
BACKLIGHT COMPENSATION (BLC) ...................................................................................................................................... 22
VIDEO LEVEL .......................................................................................................................................................................... 22
MOTION SETTINGS ........................................................................................................................................................................ 23
AUTO FLIP .............................................................................................................................................................................. 23
PROPORTIONAL PAN ............................................................................................................................................................. 23
PARK TIME ............................................................................................................................................................................ 24
SCAN SPEED ......................................................................................................................................................................... 25
PRESET FREEZE FRAME ........................................................................................................................................................ 25
LIMIT STOPS ..........................................................................................................................................................................26
AZIMUTH ZERO ..................................................................................................................................................................... 27
POWER UP ...................................................................................................................................................................................... 28
POWER UP ACTION ............................................................................................................................................................... 28
LINE SYNC ...................................................................................................................................................................................... 29
C2443M-D (11/05) 5
PRESETS ......................................................................................................................................................................................... 30
PATTERNS....................................................................................................................................................................................... 32
ZONES ............................................................................................................................................................................................ 33
WINDOW BLANKING ..................................................................................................................................................................... 34
REVERSE ................................................................................................................................................................................ 36
CLEAR WINDOW ................................................................................................................................................................... 36
BLANK ALL ABOVE/BLANK ALL BELOW ............................................................................................................................... 36
ALARMS ......................................................................................................................................................................................... 37
AUX ................................................................................................................................................................................................. 40
TITLE TEXT ...................................................................................................................................................................................... 41
ALERT ............................................................................................................................................................................................. 42
REPEAT................................................................................................................................................................................... 42
ACK ACTION .......................................................................................................................................................................... 43
ACTIVATE AUX ....................................................................................................................................................................... 43
CURRENT READING .............................................................................................................................................................. 43
RESET ALERT ......................................................................................................................................................................... 43
CLEAR ............................................................................................................................................................................................. 44
PASSWORD .................................................................................................................................................................................... 45
RESET, CYCLE POWER, REBOOT ............................................................................................................................................................. 46
RESET CAMERA .................................................................................................................................................................... 46
CYCLE CAMERA POWER ....................................................................................................................................................... 46
REBOOT SYSTEM .................................................................................................................................................................. 46
SOFTWARE/LANGUAGE FILE UPLOAD ................................................................................................................................................... 47
UPLOAD ICON .................................................................................................................................................................................47
SPECIFICATIONS...................................................................................................................................................................................... 48
DD53M22 .............................................................................................................................................................................. 48
DD53M22-X ........................................................................................................................................................................... 48
REGULATORY NOTICES ........................................................................................................................................................................... 49
6 C2443M-D (11/05)
WELCOME
Thank you for purchasing Pelco’s premier integrated dome system, Spectra III SE. Your new
system features a high resolution, monochrome camera with programmable dome drive
software.
This manual is designed to be a reference tool for the operation and programming of your
system. Inside you will find information about Spectra III SE’s features and commands, as well
as a detailed menu tree.
Getting Started
You will need to install your dome system before using this manual. Refer to the installation
packet supplied with the back box for installation instructions.
Once installed apply power to the Spectra III SE dome system. The system will start a
configuration sequence. When configuration is done, the following information is displayed:
Pelco Spectra III SE
*Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
Refer to the following pages to learn how to operate and program your dome system.
* Pressurized Spectra III SE dome systems require software version 1.25 or higher to monitor
temperature, pressure, and dew point.
C2443M-D (11/05) 7
HOW TO OPERATE YOUR DOME SYSTEM
Operation How to Control
Pan and Tilt Move joystick or press the direction keys left/right and up/down.
Zoom Far To zoom far, do the following:
1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.
2. Release the button or joystick for one second.
3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the
picture you want or reach the digital zoom1 limit.
Zoom Wide Press the Zoom Wide button or turn the joystick counterclockwise.
Scanning
Stop Scan Preset 96
Random Scan Preset 97
Frame Scan Preset 98
Auto Scan Preset 99
Presets Refer to the documentation supplied with the control system.
Patterns
2
Refer to the documentation supplied with the control system.
Zones Refer to the
Alarms Refer to the
Auto Flip Turn on or off in the programming menu. Refer to the
1
Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the
Zones
section and to the documentation supplied with the control system.
Alarms
section in this manual.
Auto Flip
section in this manual.
greater the reduction in resolution.
2
The dome cannot do digital zoom in a pattern. Optical zoom will operate in a pattern.
8 C2443M-D (11/05)
Accessing Main Menu (Preset 95)
You can call up the main menu on your monitor by programming (setting or creating) preset 95
(preset 28 if in AD32-preset mode).
Programming preset 95 for Pelco’s controllers varies according to the type of controller you are
using. Instructions for programming preset 95 are given below for various Pelco controllers.
CM6700/CM6800
1. Enter the number of the Spectra dome system and press the CAM key.
2. Enter 95 and hold the PRESET key for two seconds.
3. In the Edit Preset menu, arrow to SET and press the ACK key. The main menu appears.
KBD200A/KBD300A (Direct Mode Only)
1. Enter 95.
2. Hold the PRESET key (approximately five seconds) until the main menu appears on the
screen.
CM9500
1. Enter the number of the Spectra dome system and press the CAM key. The Main menu
appears.
2. Highlight SETUP in the Main menu and press the SELECT key.
3. Highlight CAM in the Setup menu and press the SELECT key.
4. Highlight PRESET in the Camera menu and press the SELECT key.
5. Enter 95 and press the F1 key. The main menu appears.
CM9740/CM9760/CM9770/CM9780
1. Press the ESCAPE key to open the Main menu. Select DEF. The Define Submenu
appears.
2. Enter your four-digit PIN
3. Enter 95 and select PRST. The main menu appears on the monitor.
4. Select the Quit icon to return to the default menu.
C2443M-D (11/05) 9
if this is your first time entering this mode.
(Continued on next page)
KBD4000/KBD4002
1. Press the SPOT MONITOR key.
2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu
appears on the screen.
MPT9500
Standard Coaxitron Mode
1. Enter 95 and press the PRESET SET key.
2. Position the asterisk in the YES row and press the F1 key. The main menu appears.
Extended Coaxitron or RS-485 Mode
1. Enter 95 and press the PRESET SET key.
2. Press the F2 key. The main menu appears.
NET300/NET350/NET4001A
1. Check the Set box.
2. Click the preset 95 button. The main menu appears.
WS5050
1. Right-click in the video pane of the Spectra dome system.
2. Click Preset and then click Select Preset.
3. Enter 95 and then click OK.
VCD5000
1. Enter 95 for the preset action. The shortcuts menu appears.
2. Press the Preset button on the KBD5000.
10 C2443M-D (11/05)
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT**
EXIT
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
DOME SETTINGS
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
BACK
EXIT
PRESET NUMBER 1
* * * PRESET NOT DEFINED * * *
POWER UP ACTION AUTO
BACK
EXIT
AUTO FLIP
PROPORTIONAL PAN
PARK TIME (MINUTES)
PARK ACTION
SCAN SPEED DEG/S
PRESET FREEZE FRAME
CAMERA
TYPE OF LIGHTING
AUTO FOCUS
ZOOM LIMIT
BACK
EXIT
DISPLAY SETUP
PRESET LABEL (2 SECS)
ZONE LABEL (2 SECS)
ZOOM (2 SECS)
AZIMUTH/ELEVATION (2 SECS)
DIRECTION (2 SECS)
ALARM MESSAGE (2 SECS)
<LABEL POSTIONS>
RESTORE FACTORY DEFAULT
BACK
EXIT
FREE MEMORY
LAST RESET
AZIMUTH ZERO OFFSET
MOTOR ACTIVE
CAMERA ACTIVE
FPGA VERSION X
VIDEO LEVEL NORMAL
CAMERA XXXX-XXXX
BACK
EXIT
18304
POWER ON
0
O
YES
YES
DOME DRIVE MODEL
BACK BOX MEMORY
SOFTWARE VERSION
BIOS VERSION
FONT VERSION
COMM
D ADDRESS
P ADDRESS
CM9500 MODE
32 PRESETS
PROTOCOL
DD53M22
AVAILABLE
XX.X
XX.X
XX.X
2400, N, 8, 1
1
2
OFF
OFF
C
SYSTEM INFORMATION
<ADDITIONAL>
BACK
EXIT
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>
LIMIT STOPS
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
LINE SYNC ON
LINE SYNC PHASE 0
BACK
EXIT
ZONE NUMBER 1
* * * ZONE NOT DEFINED * * *
<EDIT ZONE LABEL>
<EDIT ZONE>
ZONE ENABLED
ZONE BLANKING
<CLEAR ZONE>
BACK
EXIT
PATTERN NUMBER 1
<PROGRAM PATTERN>
<CLEAR PATTERN>
BACK
EXIT
REFERENCE INFORMATION
PATTERN USAGE 0%
REMAINING 100%
<SET WINDOWS>
STYLE GRAY
BLANK ALL ABOVE OFF
BLANK ALL BELOW OFF
BACK
EXIT
RESUME OFF
SEQUENCE (SECS) 5
RESET DELAY (SECS) 0
<ALARM SETTINGS>
BACK
EXIT
AUX 1 MODE
DWELL TIME (SECS)
AUX 2 MODE
DWELL TIME (SECS)
BACK
EXIT
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS
BACK
EXIT
ENABLE PASSWORD
<EDIT PASSWORD>
BACK
EXIT
ADVANCED SETTINGS
WINDOW NUMBER 1
<EDIT WINDOW LOCATION>
<EDIT WINDOW ZOOM>
ENABLE WINDOW NO
REVERSE
CLEAR WINDOW
BACK
EXIT
ALARM NUMBER
ALARM PRIORITY
ALARM ACTION
ACTIVATE AUX
ALARM CONTACT
BACK
EXIT
ADDITIONAL
LANGUAGE 1
LANGUAGE 6
OUTDOOR
ON
X176
MEDIUM
ZOOM SPEED
LOW LIGHT LIMIT
<ADVANCED SETTINGS>
2
SHUTTER SPEED
AUTO
27
AUTO
66
8
ON
26
OFF
HIGH
ON
ON
0
NONE
25
AUTO
ON
MOTION
BACK
EXIT
POWER UP LINE SYNC
BACK
EXIT
PRESETS
-
-
-
-
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
REFERENCE INFORMATION
AZIMUTH
ELEVATION
ZOOM
CUSTOM CAMERA SETTINGS
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
PATTERNS ZONES
1
LOW
NONE
NO
N/O
WINDOW BLANKING
SET WINDOWS
TOGGLE
1
TOGGLE
1
ALARMS
ALARM SETTINGS
ALERT**
TEMPERATURE
DEWPOINT
PRESSURE
REFRESH
BACK
EXIT
0°C
0°F
0°C
0°F
0.0 PSIG
0.0 BAR
CURRENT READING**
REPEAT
ACK ACTION
RESET ALERT
BACK
EXIT
CONSTANT
ALWAYS ON
ACTIVATE AUX
<CURRENT READING>
NO
AUX CLEAR PASSWORD
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
abcdefghij
klmnopqrst
uvwxyz#&:*
OK
CANCEL
SPACE
BACKSPACE
EDIT THE PASSWORD
----------
NO
OFF
ENGLISH X.XX
ITALIANO X.XX
LABEL POSITION
[[ZONE LABEL------]
[PRESET LABEL------]
[ALARM LABEL------]
[ALERT MESSAGE------]**
[TITLE TEXT]
SAVE AND EXIT
CANCEL AND EXIT
HELP
XXX0/-XX
0
NE
XXX.XX
PRESSURIZED** X.XX
ENABLE TITLE TEXT
<EDIT TITLE TEXT>
TITLE TEXT
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
BACKLIGHT COMP
VIDEO LEVEL
BACK
EXIT
<AUX>
<TITLE TEXT>
<ALERT>**
<CLEAR>
<PASSWORD>
Presets
The following presets are reserved for special functions.
QUICK START GUIDE – SYSTEM SETUP
Preset Function
33 Flip command
34 Pan zero command
83-89 Reserved
90-91 Manual limit stops
92-93 Scan limit stops
94 Reserved
95 Select main programming menu
96 Stop a scan
97 Random scanning
98 Frame scanning
99 Start auto scanning
NOTE: For American Dynamics controllers with only 32 presets, switch
SW3-1 on the dome drive to the ON position. When SW3-1 is ON, preset
99 becomes 32 92 becomes 25
98 becomes 31 91 becomes 24
97 becomes 30 90 becomes 23
96 becomes 29 89 becomes 22
95 becomes 28 88 becomes 21
93 becomes 26
If the limit stops are turned off, presets 23-26 can be used as regular
presets.
Quick Programming Guide
Access main menu (preset 95). See the
(Preset 95)
section.
Use the joystick* to position the cursor beside menu selection.
Press Iris Open, the submenu/cursor moves to the right.
Move the joystick up or down to view selections.
Press Iris Open to make selection.
Press Iris Close to cancel selection.
Accessing Main Menu
* If your controller does not have a joystick, use the up or down key.
** This setting only applies to Pressurized Spectra III SE dome systems with software
version 1.25 or higher. Spectra III systems that are not pressurized or pressurized
systems that do not have dome drive software version 1.25 or higher will not display
this menu item.
Software version 1.25 or higher includes the software to monitor temperature,
pressure, and dew point for Pressurized Spectra III SE systems.
C2443M-D (10/05) 11
LANGUAGE
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
The language for the on-screen menus is selectable. Available languages include English,
Spanish, French, German, Italian, Portuguese, Russian, Polish, Turkish, and Czechoslovakian.
The factory default language is English.
NOTE: The dome system cannot store all 10 languages in its memory. There are two language
packages available. The standard language package includes English, Spanish, Portuguese,
Italian, French, and German. The alternate package includes English, Russian, Polish, Turkish,
and Czechoslovakian. If your dome system does not have the language package that you require,
you must upload the other language package. Refer to the
Software/Language File Upload
section.
To change the display language:
1. Use the joystick to position the cursor beside LANGUAGE.
2. Press Iris Open. The cursor moves to the right, beside the current, selected language.
3. Move the joystick up or down to view selections. Press Iris Open to enter selection.
All on-screen menus are changed to the selected language.
Quick Programming Guide
(See page 11)
C2443M-D (11/05) 13
SYSTEM INFORMATION
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
SYSTEM INFORMATION
DOME DRIVE MODEL DD53M22
BACK BOX MEMORY AVAILABLE
SOFTWARE VERSION XX.X
BIOS VERSION XX.X
FONT VERSION XX.X
COMM 2400, N, 8, 1
D ADDRESS 1
P ADDRESS 2
CM9500 MODE OFF
32 PRESETS OFF
PROTOCOL C
PRESSURIZED* X.XX
<ADDITIONAL>
BACK
EXIT
The system Information screen displays dome drive model, software version, available memory,
and other diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1. Use the joystick to position the cursor beside SYSTEM INFORMATION.
2. Press Iris Open. The SYSTEM INFORMATION window opens.
FREE MEMORY 18304
LAST RESET POWER ON
AZIMUTH ZERO OFFSET 0
MOTOR ACTIVE YES
CAMERA ACTIVE YES
FPGA VERSION X
VIDEO LEVEL NORMAL
CAMERA XXXX-XXXX
LANGUAGE 1 ENGLISH X.XX
LANGUAGE 2 ESPANOL X.XX
LANGUAGE 3 PORTUGUES X.XX
LANGUAGE 4 DEUTSCH X.XX
LANGUAGE 5 FRANCAIS X.XX
LANGUAGE 6 ITALIANO X.XX
BACK
EXIT
ADDITIONAL
o
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
14 C2443M-D (11/05)
DISPLAY SETUP
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DISPLAY SETUP
PRESET LABEL 2 (SECS)
ZONE LABEL 2 (SECS)
ZOOM 2 (SECS)
AZIMUTH/ELEVATION 2 (SECS)
DIRECTION OFF
ALARM MESSAGE 2 (SECS)
<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS
BACK
EXIT
*This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
Display setup allows you to program how labels are displayed on the monitor. The following
labels are available:
PRESET LABEL: Identifies preset.
ZONE LABEL: Identifies zone.
ZOOM RATIO: Identifies the amount of magnification.
AZIMUTH1/ELEVATION2: Amount of pan from 0° and the amount of tilt from 0° horizontal.
DIRECTION; Displays compass direction.
ALARM MESSAGE: Displays activated alarm.
A preset label is displayed when a preset is called. A zone label is displayed when the system
moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation
and direction labels are displayed when pan/tilt is activated. An alarm message appears on the
monitor when an alarm occurs.
The following settings are available for each label:
OFF: Label is not displayed when activated.
CONSTANT: The label is continually displayed when activated.
2 SECONDS: The label is displayed for 2 seconds after activation.
5 SECONDS: The label is displayed for 5 seconds after activation.
10 SECONDS; The label is displayed for 10 seconds after activation.
1
Azimuth is the pan angle from 0° to 359°.
2
Elevation is the tilt position from 0° (horizon) to -90°.
Quick Programming Guide
(See page 11)
C2443M-D (11/05) 15
Label Position
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DISPLAY SETUP
PRESET LABEL 2 (SECS)
ZONE LABEL 2 (SECS)
ZOOM 2 (SECS)
AZIMUTH/ELEVATION 2 (SECS)
DIRECTION OFF
ALARM MESSAGE 2 (SECS)
<LABEL POSITIONS>
RESTORE FACTORY DEFAULTS
BACK
EXIT
LABEL POSITION
[ZONE LABEL-------]
[PRESET LABEL-------]
[ALARM 1-------]
[ALERT MESSAGE-------]*
[TITLE TEXT-------]
SAVE AND EXIT
CANCEL AND EXIT
HELP
0
0
/-XX
XXX
NE
XXX.XX
Labels can be placed anywhere on the monitor. This feature allows you to customize the
appearance of your monitor screen.
The following labels are not set at fixed positions:
PRESET LABEL
ZONE LABEL
ALARM 1
ZOOM RATIO - XXX.XX
AZIMUTH1/ELEVATION2 - XXX°/-XX°
DIRECTION - NE
3
ALERT MESSAGE
*
TITLE TEXT
To set a label position:
1. Use the joystick to position the cursor beside a label.
2. Press Iris Open.
3. Use the joystick to move the label up, down, left, and/or right.
4. Press Iris Open.
5. Repeat steps 1 through 4 to position other labels.
6. Position the cursor next to Save and Exit. Press Iris Open to save settings and exit menu.
1
Azimuth is the pan angle from 0° to 359°.
2
Elevation is the tilt position from 0° (horizon) to -90°.
3
The alert message is the warning displayed on the monitor if pressure, temperature, or dew
point inside the dome reach unacceptable levels.
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.
16 C2443M-D (11/05)
Loading...