Pelco DD429, DD436, SD436-PSGE1 Specsheet

PRODUCT SPECIFICATION
Stainless Steel Spectra® IV SE Series
BACK BOX AND LOWER DOME
camera solutions
Product Features
All Stainless Steel Construction
Built-in Back Box Memory
Intregrated Passive UTP Circuit
7 Alarm Inputs; 2 Programmable Auxiliary Outputs
Built-in Surge and Limited Lightning Protection
®
Compatible with 29X and 36X Spectra
IV SE Dome Drives
Bubble Constructed of Optically Clear Acrylic
Environmental Pendant Model Only
Indoor/Outdoor Applications
Meets NEMA Type 4X and IP66 Standards
Ability to Add IP Network Capability by Purchasing Optional TXB-N
Module
Pelco’s Stainless Steel Spectra® IV SE Series is designed for harsh environmental installations and meets NEMA Type 4X and IP66 stan­dards.
The components (back box and lower dome) provide added protection against corrosive conditions. The pendant-style back box (BB4-PSG-E) is constructed of Type 316þStainless Steel (SS) and includes a sun shield (also constructed of Type 316 SS), heater, and fan. The lower dome features a trim ring constructed of Type 316 SS and an optically clear bubble that is available in smoked (LD53PSB-0) or clear (LD53PSB-1) acrylic.
The Stainless Steel Spectra IV SE Series has all the features of the Spectra IV SE dome system (built-in back box memory, two aux­iliary outputs, seven alarm inputs) and is also compatible with all Spectra IV SE dome drives.
Camera and lens options for the Stainless Steel Spectra IV SE Series include:
–Day/night camera, 128X wide dynamic range, motion detection,
electronic image stabilization, image enhancement, LowLight technology, and 36X optical zoom with 12X digital zoom
–Day/night camera, 128X wide dynamic range, motion detection,
LowLight technology, and 29X optical zoom with 12X digital zoom
For an alternative mounting option use the IDM4012SS wall mount. The IDM4012SS mount is designed specifically for the Stainless Steel Spectra IV SE Series and features all stainless steel construc­tion and conduit access in the bottom and back of the mount.
ENVIRONMENTAL PENDANT
BB4-PSG-E AND LD53PSB-1
(SHOWN WITH IDM4012SS WALL MOUNT)
DOME IS SECURED TO CEILING BY MOUNTING BRACKET
10.90
(27.69)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
8.52
(21.64)
5.90
(14.99)
TOP PORTION OF BACK BOX IS REMOVABLE FOR SURFACE MOUNT APPLICATIONS
6.75
(17.15)
5.83
(14.80)
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3415 / REVISED 12-21-12
TECHNICAL SPECIFICATIONS
SYSTEM MODEL NUMBERS
Back Box Type
Environmental Pendant
COMPONENT MODEL NUMBERS
Back Box Lower Dome Dome Drive*
BB4-PSG-E Environmental
*For PAL and CCIR models add “-X” suffix to part number (for example: SD429-PSGE0-X or DD429-X)
DD5-FM accepts camera and lens combinations including a BNC connector up to 12.70 x 6.99 x 6.99 cm (5.00" D x 2.75" W x 2.75" H).
Lower
Dome
Smoked SD429-PSGE0 SD436-PSGE0
Clear SD429-PSGE1 SD436-PSGE1
29X Day/Night* 36X Day/Night*
LD53PSB-0 Smoked, pendant, Pendant mount, gray 316 SS
LD53PSB-1 Clear, pendant, black
black trim ring 316 SS
trim ring 316 SS
DD429 Day/night (NTSC) camera (29X) DD436 Day/night (NTSC) camera (36X)
DD5-FM
Removable, fixed mount bracket only (camera and lens not
included); interchangeable with all Spectra IV dome drives
ELECTRICAL
Input Voltage 18 to 32 VAC; 24 VAC nominal Input Power
24 VAC 73 VA nominal
24 VDC 3 A nominal Fuse 1.6 A Auxiliary Outputs 2 Alarm Inputs 7
GENERAL
Construction
Back Box 316 stainless steel; gray, polyurethane
powder coated finish
Lower Dome
Trim Ring 316 stainless steel; black, polyurethane
powder coated finish
Bubble Acrylic, clear or smoked Cable Entry Through 1.5-inch NPT back box pendant
mount
Weight (approximate) Unit Shipping
Back Box 4.75 lb (2.15 kg) 7 lb (3.18 kg)
Lower Dome 1.83 lb (0.83 kg) 4 lb (1.81 kg)
Dome Drive 3.3 lb (1.48 kg) 4.9 lb (2.22 kg) Environment In
door/outdoor
Operating Temperature (Assumes no wind chill factor; for detailed
test conditions, contact Pelco)
Maximum 140°F (60°C) absolute maximum; 122°F
(50°C) sustained maximum
Minimum –60°F (–51.11°C) absolute minimum; minimal
icing at sustained minimum of –50°F (-45.56°C); prevents icing at sustained minimum of –40°F (–40°C); de-ices 0.1 inch (2.5 mm) within 3 hours after power-up
CERTIFICATIONS
• CE, Class B
FCC, Class B
• UL/cUL Listed
•C-Tick
• S Mark for Argentina
• Meets NEMA Type 4X, IP66 standards when installed properly
OPTIONAL ACCESSORIES
IPS-CABLE Remote monitor cable and software. See
IPS-RDPE-2 Remote data port. 24 VAC, wall/pole mount
TXB Series
TXB-N Series
FS85011A
If TXB/TXB-N Series or FS85011A boards are installed, it is not possible to
Network-based communication module that
upgrade system operating software through the remote data port (IPS-RDPE-2).
www.pelco.com for a list of compatible devices.
video/data breakout box. Allows ground-level control/programming and software upgrades when used with the IPS-CABLE.
Translator boards for AD Manchester, Hernis,
®
(Philips, Burle), TASS, and NTCIP
Bosch protocols.
allows you to control and monitor Spectra IV dome systems over an IP network (in-ceiling and pendant models only). When TXB-N is installed in the camera's back box, the camera system supports Web and Endura connectivity to Pelco products and open architecture connectivity to third-party software. TXB-N provides simultaneous access to the camera from both an analog and IP-based control point.
Fiber transmitter sends one unidirectional composite video channel and one bidirectional data channel over one multi­mode or single-mode fiber optic cable.
RECOMMENDED POWER SUPPLIES
WCS Series Single/multiple 24 VAC camera power supply,
outdoor
RECOMMENDED MOUNT
IDM4012SS Stainless steel wall mount with feed-through
capabilities
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community
Pelco, the Pelco logo, and other trademarks associ ated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and th e
ONVIF logo are trademarks of ONVIF Inc. All other prod uct names and
Product specifications and availability are subjec t to change without notice.
services are the property of their respective comp anies.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...