Pelco D6230L, D6230L-US, S6230-ESGL0, S6230-ESGL0US, S6230-ESGL1 Specsheet

...
PRODUCT SPECIFICATION
Spectra® Enhanced Series IP PTZ Domes
HIGH-SPEED PTZ, 30X, FULL HD, WDR, LOW-LIGHT PERFORMANCE
Product Features
SureVision 3.0 Technology, Including:
– 130 dB Wide Dynamic Range (WDR)
– Advanced Low Light Down to 0.03 LUX on Select Models
– Anti-Bloom Technology
– 3D Noise Filtering
– Enhanced Tone Mapping
Up to Full HD 1080p and up to 60 Images per Second (ips)
Power over Ethernet (HPoE and PoE+), 24 VAC, 24 VDC
Pelco H.264 Smart Compression Technology
Three Automatic Defog Options
Electronic Image Stabilization (EIS)
Built-in Analytics Suite
Vandal Resistant IK10 Smoked or Clear Bubble
SD Card Slot with Support for SDXC Cards
Compatible with Pelco and Third-Party Video Systems
ONVIF Profile S, Profile G, and Profile Q Conformant
3-Year Warranty and Support
camera solutions
Top of the Line IP Performance
Pelco’s Spectra® Series of high speed PTZ domes provide top tier image quality and performance. They include valuable embedded features that enhance the value of the product. Low latency video and control make the camera incredibly easy to use.
Full High Definition SureVision 3.0 Cameras
Spectra Enhanced has long provided Full HD 1080p 30x optical zoom cameras that run at up to 60 frames per second and provide 130dB of True Wide Dynamic Range (WDR). With Pelco’s latest product evolution a powerful new camera option is now available that features the same powerful WDR capabilities as before but now with the addition of Pelco’s latest SureVision 3.0 low light performance. In addition to 130dB of True WDR SureVision 3.0 adds a new level of low light performance that is up to twenty times better than base Spectra Enhanced models. The new SureVision 3.0 camera is available in 30x optical zoom models.
Embedded Features
Included in all models are a full suite of built in video analytics including: Abandoned Object, Adaptive Motion Detection, AutoTracker, Camera Sabotage, Directional Motion, Loitering Detection, Object Counting, Object Removal, and Stopped Vehicle. Spectra Enhanced also allows for up to 32 window blanking privacy zones that are configurable with custom blurring options. Three levels of Image Defog provide options for enhancing the image on foggy or rainy days. Five White Balance modes are available for overcoming difficult lighting conditions day and night. A Vivid
Imaging mode can be enabled to automatically increases color saturation and sharpening. Spectra Enhanced supports up to 2TB of onboard local storage (not supplied) that is easily accessible through the ONVIF Profile G protocol or FTP.
Intuitive Design
Spectra Enhanced features the same ease of installation and maintenance that you have come to expect from Spectra. Each dome system consists of a back-box, a dome drive, and an IK10 rated lower dome. There is a choice of five form factors: in-ceiling, environmental in-ceiling, pendant, environmental pendant, and stainless steel environmental pendant.
VMS Integration
Spectra Enhanced easily connects to Pelco IP and hybrid video systems such as VideoXpert, Endura 2.0 (or later), and Digital Sentry
7.3 (or later). The camera is also compatible with Digital Sentry NVS (DS NVS), a full-featured video management software, which is available as a free download at www.pelco.com. DS NVS includes four free Pelco IP licenses and allows for the management of video from up to 64 cameras.
Pelco endeavors to be the most open and integrated camera provider in the industry and as a part of that effort Spectra Enhanced is integrated with a long and ever-growing list of 3rd party software and Video Management Systems (VMS).
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3946 / REVISED 1-15-19
BACK BOX FEATURES
13.2 (5.2)
19.0 (7.5)
20.8 (8.2)
15.0 (5.9)
9.2
(3.6)
21.8 (8.6)
15.0 (5.9)
28.2
(11.1)
15.0 (5.9)
28.2
(11.1)
23.8 (9.4)
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
In-Ceiling (Indoor)
• Single Back Box for Suspended or Hard Ceiling Applications with Light Gray Trim Ring, RAL9002
• Requires 13.35 cm (5.25 in.) Space Above Ceiling and 8.25 cm (3.25 in.) Below
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated Nylon Bubble
• Suitable for Use in Environmental Air Handling Spaces
• 0° to 50°C (–32° to 122°F) Sustained Operating Temperature
11.2 (4.4)
11.2 (4.4)
25.2 (9.9)
15.0 (5.9)
21.8 (8.6)
Environmental In-Ceiling
• Single Back Box, RAL9011, for Hard Ceiling Applications
• Requires 11.18 cm (4.40 in.) Space Above Ceiling;10.92 cm (4.30 in.) Below
• Type 4X and IP66
• Includes Heater and Blower
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated Nylon Bubble
• –45° to 60°C (–50° to 140°F) Sustained Operating Temperature
Standard Pendant
• Standard Pendant Available in Black or Light Gray Finish, RAL9002
• Aluminum Construction, IK10 Rated Nylon Bubble
• Uses 1 1/2-inch NPT Thread
• –5° to 50°C (–23° to 122°F) Sustained Operating Temperature
Environmental Pendant
• Environmental Pendant Available in Light Gray Finish, RAL9002
• Aluminum Construction, IK10 Rated Nylon Bubble
• Type 4X and IP66
• Uses 1 1/2-inch NPT Thread
• Includes Sun Shield, Heater, and Blower
• –45° to 60°C (–50° to 140°F) Sustained Operating Temperature
28.2
(11.1)
15.0 (5.9)
23.6 (9.3)
Stainless Steel Environmental Pendant
• Stainless Steel Environmental Pendant Available in Light Gray Finish, RAL9002
• All Stainless Steel Construction, IK10 Rated Nylon Bubble
• Type 4X and IP66
• Uses 1 1/2-inch NPT Thread
• Includes Sun Shield, Heater, and Blower
• –45° to 60°C (–50° to 140°F) Sustained Operating Temperature
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Specification 30X Low Light
Sensor Type 1/2.8-inch Type Exmor CMOS Sensor
Optical Zoom 30X
Digital Zoom 12X
Maximum Resolution 1920 x 1080
Lens f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~ 129.0 mm (tele)
Horizontal Angle of View 63.7° wide - 2.3° tele
Aspect Ratio 16:9
Color (33 ms) 0.03 lux
Light Sensitivity
Day/Night Capabilities Yes
Shutter Range 1/1 ~ 1/10,000 sec
Signal-to-Noise Ratio >50dB
IR Cut Filter Yes
Wide Dynamic Range 130 dB
Iris Control Auto iris with manual override
Backlight Compensation Yes
Automatic Gain Control Yes
Active Noise Filtering 3D Noise Filtering
Electronic Image Stabilization (EIS) Yes
Color (250 ms) 0.008 lux
Mono (33 ms) 0.004 lux
Mono (250 ms) 0.001 lux
Note: Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain at 30 IRE (30% of signal level) with Sensitivity Boost OFF; 4X improvement to sensitivity with Sensitivity Boost ON
SOFTWARE FEATURES
• 256 presets
• 16 tours
• ±0.1° preset accuracy
• 8 configurable scans
• Patterns–8 recordable patterns (up to 5 minutes each)
• Multilingual menus (English, Spanish, Portuguese, Italian, German, French, Russian, Turkish, Arabic, Simplified Chinese, and Korean)
• Password protection
• 32 window blanks, configurable in size, with 5 window blur options
• “Auto Flip” feature rotates dome 180° at bottom of tilt travel
• Configurable park with actions
• Proportional pan/tilt continually decreases pan/tilt speeds in proportion to depth of zoom
• Pelco analytics including nine user-configurable behaviors
• Image Defog modes
PELCO ANALYTICS BEHAVIORS
Spectra Enhanced includes nine user-configurable behaviors. The camera is capable of running up to three behaviors simultaneously; although, the number of behaviors is limited to the available processing power of the camera and the type of analytic being used.
Abandoned Object: Detects objects placed within a defined zone and triggers an alarm if the object remains in the zone longer than the user-defined time allows. An airport terminal is a typical installation for this behavior. This behavior can also detect objects left behind at an ATM, signaling possible card skimming.
Adaptive Motion Detection: Detects and tracks objects that enter a scene and then triggers an alarm when the objects enter a user-defined zone. This behavior is primarily used in outdoor environments with light
traffic to reduce the number of false alarms caused by environmental changes.
AutoTracker: Detects and tracks movement in the field of view. When
the AutoTracker behavior is configured, the system automatically pans and tilts to follow the moving object until the object stops or disappears from the monitored area.
Camera Sabotage: Detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed by spray paint, a cloth, or a lens cap. Any unauthorized repositioning of the camera also triggers an alarm.
Directional Motion: Generates an alarm in a high traffic area when a
person or object moves in a specified direction. Typical installations for this behavior include an airport gate or tunnel where cameras can detect objects moving in the opposite direction of the normal flow of traffic or an individual entering through an exit door.
Loitering Detection: Identifies when people or vehicles remain in a
defined zone longer than the user-defined time allows. This behavior is effective in real-time notification of suspicious behavior around ATMs, stairwells, and school grounds.
Object Counting: Counts the number of objects that enter a defined
zone. This behavior can be used to count the number of people at a store entrance/exit or inside a store where the traffic is light. This behavior is based on tracking and does not count people in a crowded setting.
Object Removal: Triggers an alarm if an object is removed from a
user-defined zone. This behavior is ideal for customers who want to detect the removal of high value objects, such as painting from a wall or a statue from a pedestal.
Stopped Vehicle: Detects vehicles stopped near a sensitive area longer
than the user-defined time allows. This behavior is idea for airport curbside drop-offs, parking enforcement, suspicious parking, traffic lane breakdowns, and vehicles waiting at gates.
Loading...
+ 4 hidden pages