• USB Expansion Slots for Alarms and Audio Accessories
• 16 Preset Tours, 255 Dome Presets, 8 Privacy Zones
camera solutions
Network Dome System
Pelco takes its industry-leading Spectra
world of high definition.
streaming images over the Internet using a standard Web browser
(Microsoft
the resolution of standard definition domes,
solution to view details such as faces, license plates, tattoos,
playing cards (in casinos), or other specific features.
Spectra HD
improvement in quality over MPEG-4 and 20 times more efficient
than M-JPEG. The dome system features open architecture
connectivity for third-party software recording solutions allowing
integration into virtually any IP-based HD system. It is also
compatible with Digital Sentry
with all Pelco IP camera solutions,
to record, manage, configure, and view multiple live streams. When
connected to an Endura® HD network-based video security system,
the dome system has access to EnduraStor
optimized image quality and bandwidth efficiency.
Spectra HD
maintenance that you have come to expect from Spectra. Each dome
system consists of a back box, a dome drive, and a lower dome.
Spectra HD
environmental in-ceiling, pendant, and environmental pendant. All
environmental models meet NEMA Type 4X, IP66 when properly
installed.
®
Internet Explorer® or Mozilla® Firefox®). With four times
supports High-Profile H.264 compression, a vast
features the same ease of installation and ease of
includes a choice of four back box models: in-ceiling,
Spectra HD
®
®
Series dome into the
delivers crystal-clear, live
Spectra HD
video management systems. As
Spectra HD
™
and EnduraView™ for
is an ideal
is Endura Enabled
Built-In Analytics
Pelco Analytics
Spectra HD. Eight Pelco behaviors are preloaded and included as
standard features. Pelco behaviors can be configured and enabled
using a standard Web browser, and they are compatible with Endura
or a third-party system that supports Pelco’s Analytics API system.
enhance the flexibility and performance of
Web Interface
Spectra HD
setup and administration.
Spectra HD
Endura version 2.0 (or later) and Digital Sentry version 4.3 (or later).
The camera is also compatible with Digital Sentry NVs (DS NVs), a
™
full-featured video management software, which is available as a
free download at
IP licenses and allows for the management of video from up to
64 cameras.
uses a standard Web browser for powerful remote
easily connects to Pelco IP and hybrid systems such as
www.pelco.com.
DS NVs includes four free Pelco
Window Blanking
Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. Spectra HD supports up to eight
blanked windows. A blanked area will appear on the screen as a
solid gray window.
TECHNICAL SPECIFICATIONS
PELCO ANALYTICS
Spectra HD Series includes eight user-configurable behaviors. The
camera is capable of running up to three behaviors at the same time;
although, the number of behaviors is limited to the available
processing power of the camera and the type of analytic being used.
Note:
Available processing power is determined by the settings for
compression standards, resolution, image rate, bit rate, and analytic
configuration.
For each behavior, you can create several custom profiles that
contain different camera settings. With these profiles, you can set up
different scenarios for the behavior, which will automatically detect
and trigger alarms when specific activity is detected.
Pelco Analytics are configured and enabled using a standard Web
browser, and Pelco behaviors are compatible with Endura or a
third-party system that supports Pelco’s Analytics API system.
Multiple Pelco behaviors can be scheduled to work during a certain
time or condition. For example, during the day, a camera can be
configured with Object Counting to count the number of people that
enter a lobby door. At night, the operator can change the profile to
Camera Sabotage to trigger an alarm if a camera is moved or
obstructed. Available Pelco behaviors include:
•
Abandoned Object:
triggers an alarm if the object remains in the zone longer than the
user-defined time allows. An airport terminal is a typical installation for
this behavior. This behavior can also detect objects left behind at an ATM,
signaling possible card skimming.
•
Adaptive Motion:
then triggers an alarm when the objects enter a user-defined zone. This
behavior is primarily used in outdoor environments with light traffic to
reduce the number of false alarms caused by environmental changes.
•
AutoTracking:
view. When the AutoTracking behavior is configured, the system will
automatically pan and tilt to follow the moving object until the object
stops or disappears from the monitored area.
•
Camera Sabotage:
alarm is triggered if the lens is obstructed with spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.
•
Directional Motion:
person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.
•
Loitering Detection:
defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.
•
Object Counting:
or cross a tripwire. This behavior might be used to count the number of
people at a store entrance/exit or inside a store where the traffic is light.
This behavior is based on tracking and does not count people in a
crowded setting.
•
Object Removal:
defined zone. This behavior is ideal for customers who want to detect the
removal of high value objects, such as a painting from a wall or a statue
from a pedestal.
•
Stopped Vehicle:
than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.
Detects objects placed in a defined zone and
Detects and tracks objects that enter a scene and
Detects and tracks movement in the camera’s field of
Detects contrast changes in the field of view. An
Generates an alarm in a high traffic area when a
Identifies when people or vehicles remain in a
Counts the number of objects that enter a defined zone
Triggers an alarm if an object is removed from a
Detects vehicles stopped near a sensitive area longer
TECHNICAL SPECIFICATIONS
The following diagram illustrates how the camera system interprets streaming video when embedded analytics are configured and enabled.
SPECTRA
VIDEO
ANALYTICS OVERLAY
• CONFIGURATION
• ALARMS
• PELCO ANALYTICS API
SYSTEM
IMPORTANT NOTE: PLEASE READ.
requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific requirements.
The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ,
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Rotating Discreet Liner with Sealed Fixed Bubble
• 8 Privacy Zones, Configurable in Size
• “Auto Flip” Feature Rotates Dome 180° at Bottom of Tilt Travel
• Configurable Park with Actions
• Proportional Pan/Tilt Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom
BACK BOX FEATURES
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
19.0 (7.5)
In-Ceiling (Indoor)
13.2
(5.2)
8.8
(3.5)
15.0 (5.9)
20.8 (8.2)
• Single Back Box for Suspended or Hard Ceiling Applications
• Requires 13.35 cm (5.25 in.) Space Above Ceiling and 8.25 cm (3.25 in.) Below
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Suitable for Use in Environmental Air Handling Spaces
(ENVIRONMENTAL DOME
WITH SUN SHROUD SHOWN)
11.0
(4.4)
10.9
(4.3)
26.9
(10.6)
15.0 (5.9)
21.8 (8.6)
25.2 (9.9)
15.0 (5.9)
21.8 (8.6)
Standard and Environmental Pendant
• Standard and Environmental Models
• Standard Pendant Available in Black or Gray Finish; Environmental Pendant
Available in Gray Finish Only
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Environmental Model Includes Sun Shield, Fan, and Heater
Environmental In-Ceiling
• Single Back Box for Hard Ceiling Applications
• Requires 11.18 cm (4.40 in.) Space Above Ceiling and 10.92 cm (4.30in.) Below
• Includes Heater and Fan
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Quick Disconnect to Dome Drive
• Aluminum Construction
TECHNICAL SPECIFICATIONS
CAMERA
Sensor Type 1/3-inch CCD
Optical Zoom 18X
Maximum Resolution 1280 x 960
Lens f/1.6 (focal length, 4.7 ~ 84.6 mm optical)
Aspect Ratios 4:3 or 16:9
Light Sensitivity f/1.6; 2,850°K; SNR >24dB
Color (33 ms) 0.70 lux
Color (250 ms) 0.07 lux
Mono (33 ms) 0.25 lux
Mono (250 ms) 0.02 lux
Day/Night Capabilities Yes
IR Cut Filter Yes
IR Trace Curves 850 nm and 950 nm
Wide Dynamic Range 60 dB
Iris Control Auto iris with manual override
Backlight Compensation Yes
VIDEO
Video EncodingH.264 High, Main, or Base profiles and MJPEG
Video StreamsUp to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame RateUp to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon coding, resolution, and stream configuration)
Unicast Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
MulticastUnlimited users H.264
Security AccessPassword protected
Software InterfaceWeb browser view and setup
Pelco System IntegrationEndura 2.0 (or later)
Digital Sentry 4.2 (or later)
Open IP IntegrationPelco IP camera API
Minimum System Requirements
Processor Intel
Operating System Windows® XP, Windows Vista®, or Mac® OS X 10.4 (or later)
Memory 2 GB RAM
Network Interface Card 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser* Internet Explorer 7.0 (or later) or Firefox 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics
Media Player† Pelco Media Player‡ or QuickTime® 7.6.5 for Windows XP, Windows Vista, or QuickTime 7.6.4 for Mac OS X 10.4
ResolutionMJPEG
Aspect
Ratio
®
Core™ 2 Duo microprocessor, 2.6 GHz
Maximum
IPS
Recommended
Bit Rate (Mbps)
(IP GOP structure)
Maximum
IPS
Recommended
Bit Rate (Mbps)
ANALYTICS
Required Systems for Pelco Analytics
Pelco Interface WS5200 Advanced System Management Software on an Endura 2.0 (or later) system
Open APIPelco analytics allow streaming information to communicate though Pelco’s API Guide for Video Analytics version 0.55.30 (or later),
*Internet Explorer is not supported by Mac OS X 10.4.
†
This product is not compatible with QuickTime version 7.6.4 for Windows XP or Windows Vista. If you have this version installed on your PC, you will need to upgrade
to QuickTime version 7.6.5.
‡
Pelco Media Player is recommended for control, smoothness, and reduced latency as compared to QuickTime.
available at
Pelco.com/IP
TECHNICAL SPECIFICATIONS
GENERAL
Construction
Back BoxAluminum
Dome Drive Aluminum, thermo plastic
Lower Dome Acrylic
Light Attenuation
Smoked f/0.5 light loss
ClearZero light loss
Cable Entry (back box)
In-Ceiling 0.75-inch conduit fitting
PendantThrough 1.5-inch NPT pendant mount
Weight (approximate) UnitShipping
In-Ceiling 2.4 kg (5.2 lb) 3.6 kg (8 lb)
Environmental In-Ceiling 2.8 kg (6.2 lb)4.5 kg (10 lb)
Standard Pendant 3.0 kg (6.5 lb)5.0 kg (11 lb)
Environmental Pendant 3.5 kg (7.6 lb)5.4 kg (12 lb)
Environment
In-CeilingIndoor
Environmental In-Ceiling Outdoor
Pendant, Standard, and
Environmental Indoor/outdoor
Operating Temperature
In-Ceiling 0° to 50°C (32° to 122°F)
Standard Pendant (Assumes no wind chill factor)
Maximum 45°C (113°F) absolute maximum;
35°C (95°F) sustained maximum
Minimum –4°C (25°F) sustained minimum
Environmental In-Ceiling,
Environmental Pendant (Assumes no wind chill factor)
Maximum60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum–51°C (–60°F) absolute minimum; prevents
icing at sustained minimum of –30°C (–22°F);
de-ices 2.5 mm (0.1 in.) within 3 hours after
power-up at –30°C (–22°F)
Effective Projected Area (EPA) 20.5 square inches (without mount),
47 square inches (with IWM Series mount)
ELECTRICAL
Ports RJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Autonegotiate/Manual setting
Cabling Type Cat5 or better for 100Base-TX
Input Voltage 18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
Input Power
24 VAC 23 VA nominal (without heater);
73 VA nominal (with heater)
24 VDC 0.7 A nominal (without heater);
3 A nominal (with heater)
PoE IEEE802.3af (without heater)
Fuse1.25 A
MECHANICAL
(Dome Drive Only)
Variable Speed 0.1° to 400°
Preset Accuracy±0.1°
Pan Movement 360° continuous pan rotation
Vertical Tilt +0° to –90°
Manual Pan/Tilt Speeds