Pelco C1463SM User Manual

C1463SM (12/00) PDF8 Series Pendant Fixed Mount Dome

3500 Pelco Way Clovis, CA 93612-5699 USA

In North America & Canada: Tel (800) 289-9100 FAX (800) 289-9150

International Customers: Tel +1(559) 292-1981 FAX +1(559) 348-1120

www.pelco.com

This maintenance/service manual consists of an exploded assembly diagram and parts list. Use this manual when ordering replacement parts for the PDF8 Series dome.

MAINTENANCE

Regularly scheduled maintenance helps prolong the operational life and appearance of the equipment.

Figure 1. PDF8 Series Exploded Assembly Diagram

Table A. Parts List

Item Qty Description Part Number

11Bezel 8084196BCOMP 21Back box 8084195BCOMP 31Back box cap, pendant 8084994COMP 43Pin 80010053 53Flanged nylon spacer, .25-inch CLR x .4375-inch L SPA2538 63Compression spring SPRG10000 71Flange, 1.50-inch NPT MRCA4000COMP 81Safety Cable, safety E7081002COMP 91Acrylic dome (black w/smoked slot) (Not shown) 80810015-00

10 1 Tilt table (Not shown) PDF4001COMP 11 1 Fixed drive frame (Not shown) PDF4002COMP 12 1 Flange adapter (Not shown) PDF4003COMP 13 1 Retainer bracket (Not shown) PDF4004COMP

A4Screw 1/4-20 x .625-inch, Phillips, flat head ZH1/420X.625SFS B3Screw 6-32 x .25-inch ZH6-32X.250SS C3Internal lock washer, #6 ZH6LWSIS

1 Acrylic dome (black w/clear slot) (Not shown) 80810015-01

WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below:

• Three years on Genex® Series (multiplexers, server, and keyboard).

•Two years on cameras and all standard motorized or fixed focal length lenses.

•Two years on Legacy®, Camclosure™ Camera Systems, CM6700/CM8500/ CM9500/CM9750/CM9760 Matrix, PelcoVision®, DF5 Series and DF8 Fixed Dome products.

•Two years on Spectra applications.

•Two years on WW5700 series window wiper (excluding wiper blades).

• Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

REVISION HISTORY

Manual # Date Comments

C1463SM 12/00 Original version.

and Esprit™, including when used in continuous motion

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information:

1. Model and serial number

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair). Goods returned for repair or credit should be clearly identified with the assigned CA/RA number and freight should be prepaid. All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.

Ship freight prepaid to: Pelco

3500 Pelco Way Clovis, CA 93612-5699