Pelco BU6-IRWV50-6 Specsheet

PRODUCT SPECIFICATION

camera solutions

BU6 Series Long-Range Integrated IR Bullet Camera

1/3-INCH CCD, 650 TVL, WDR, DSS, DAY/NIGHT, RUGGED, VANDAL-RESISTANT

Product Features

• 650 TV Lines

• High Sensitivity (Zero Lux with IR)

• 120 dB Wide Dynamic Range (WDR)

• Optical Day/Night Function to Switch to Day or Night Mode,

Depending on the Light Level

• Sony

1/3-inch Super HAD CCD II™ 960H

• Sony Digital Signal Processor (DSP), Effio-P

• IR Compensation

• Autosensing Power (24 VAC/12 VDC with Internal Synchronization)

• Digital Slow Shutter (DSS)

• Digital Zoom

• 3D Digital Noise Reduction (DNR)

• 40 Meters of IR Illumination Distance

• Remote Access Through Coaxitron

• Weathertight Outdoor Operation (IP66)

• Rugged, Vandal-Resistant Design (IK10)

and RS485

™

• Environmental Capability with a Wide Operating Temperature

• Privacy Zones

• Motion Detection

• Camera Titles

• Alarm Output

The BU6 Series is Pelco’s premium grade, longer-range integrated IR bullet CCD camera. It uses a group of integrated infrared LEDs to deliver high quality pictures, even at night with zero illumination. Its WDR and day/night technology provides outstanding performance over a wide range of low-light conditions, including extreme backlight conditions. The camera uses a removable infrared (IR) cut filter to switch between color and black-white modes as environmental lighting conditions change, and when the need for infrared sensitivity is realized.

The BU6 Series is an ultra high resolution digital camera with 650 TVL of resolution and a minimum of 0.13 lux illumination in color mode. In low-light conditions, the camera can use digital slow shutter (DSS) and to produce 0.03 lux sensitivity. The BU6 Series is equipped with high performance IR compensation. The camera can be set manually to adjust IR illumination levels, enabling customers to change the levels of luminance and contrast according to the shooting environment. This function reduces the blooming effect and delivers clear images when objects get closer to the camera. With IR supplemental lighting, the BU6 Series operates under zero lux (monochrome mode). Camera features include autosensing power (24 VAC or 12 VDC with internal synchronization) and automatic gain control (AGC).

The BU6 Series is equipped with high performance adaptive illumination IR LEDs. Supported by built-in WDR technology, cameras can detect the IR illumination level and adjust it automatically. This reduces the blooming effect and outputs clear images when an object gets increasingly closer to the camera.

The BU6 Series includes automatic white balance (AWB) for difficult lighting situations, digital noise reduction (DNR) that minimizes environment noise levels to produce clear image quality, and backlight compensation (BLC) that adjusts the picture to prevent objects from appearing dark due to a strong backlight. These fine-tuning features are easily configured using the convenient on-screen menus and can be accessed using the bottom panel button. or remotely using any Pelco controller with Pelco D or Coaxitron

protocol. Use these menus to select a specific profile, to customize and save camera settings for the specific application, and trigger alarm out functions.

The BU6 Series has a rugged, vandal-resistance design and an impact resistance that meets the IK10 standard. The BU6 Series has wide a operating temperature (–30° to 50°C), which makes it an ideal solution for most rugged outdoor applications. The BU6 Series also meets weathertight IP66 standards.

The BU6 Series has built-in analytical capabilities including privacy zones, motion detection, and camera tiltles that adds to its functionality and makes it suitable for most applications.

Typical applications for BU6 Series includes longer-range outdoor boundary surveillance that has zero light at night and a need to supplement the scene with IR light. The true day/night functionality provides the best images in low-light and IR light applications by using a black-white mode function.

Typical applications for the BU6 Series includes medium-range outdoor boundary surveillance that has zero light at night and a need to supplement the scene with IR light. The true day/night functionality provides the best images in low-light and IR light applications by using a black-white mode function.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3908 / REVISED 6-15-12

TECHNICAL SPECIFICATIONS

MODELS

BU6-IRWV50-6 High resolution IR bullet camera, 1/3-inch

BU6-IRWV50-6X High resolution IR bullet camera, 1/3-inch

CCD, true day/night, DSS, 24 VAC or 12 VDC, 6 to 50 mm varifocal lens, NTSC format

CCD, true day/night, DSS, 24 VAC or 12 VDC, 6 to 50 mm varifocal lens, PAL format

CAMERA/OPTICS

Imaging Sensor Sony 1/3-inch Super HAD CCD II 960H Signal Processing Sony DSP, Effio-P Day/Night Operation

Day Infrared (IR) cut filter Night BK-7 glass, same optical displacement as day

mode

Effective Pixels

NTSC 976 (H) x 494 (V), approx. 480k

PAL 976 (H) x 582 (V), approx. 570k Scanning Area 4.7 (H) mm x 3.5 (V) mm (0.19 x 0.14 inch) Scanning System

NTSC 525 lines, 2:1 interlace

PAL 625 lines, 2:1 interlace Scanning Frequency Horizontal Vertical

NTSC 15.734 kHz 59.94 Hz

PAL 15.625 kHz 50.00 Hz Synchronization Internal Horizontal Resolution 650 TVL Minimum Illumination f/1.6; 2,850°K; 30 IRE;

Color (NTSC: 17 ms/ PAL: 20 ms) 0.1 lux; Color (500 ms) 0.03 lux;

Mono (with IR) 0.0 lux IR Cut Filter Yes, D/N switch Dynamic Range 120 dB dual-scan WDR IR Illumination Distance 40 m IR Sensitivity >40% at 850 nm, peak response Low-Light Technology 32 LEDs Electronic Shutter Range

NTSC Auto, 1/60 to 1/100,000 sec;

Manual, 1/60 to 1/10,000 sec

PAL Auto, 1/50 to 1/100,000 sec;

Manual, 1/50 to 1/10,000 sec

NOTE: Slow shutter support is 2X to 128X.

Video Output 1.0 Vp-p, NTSC/PAL composite, 75 ohms,

BNC connector Auto White Balance Range 2,000° to 9,500°K White Balance ATW/Manual/Push/Push lock/User1/User2/

Anti CR Signal-to-Noise Ratio 48 dB (>52 dB by parameter adjustment) Automatic Gain Control Off/on up to 36 dB, 16 levels configurable Lens Varifocal Backlight Compensation Yes F-Number f/1.6 Focal Length 6 to 50 mm Focus Range ∞ to 1.5 m (4.9 ft) Angle of View 6 mm (wide)

Horizontal 43.9° 5.7° Vertical 33.2° 4.3°

Adjusting Angle

Panning Range ±180° Tilting Range ±90°

Rotation Range ±360° Digital Noise Reduction 3D Privacy Zones Yes, 15 sizable windows Motion Detection Yes; 4 areas, sensitivity selectable Camera Titles Yes, 20 characters

™

50 mm (telephoto)

Digital Zoom Yes, 255X Image Stabilization Yes (under 10 Hz) Scene Learning/Analytics Yes, defocusing Remote Access RS-485 and Coaxitron Alarm Output 1

ELECTRICAL

Power Requirement

NTSC 12 VDC/24 VAC +10% to –15%, 60 Hz PAL 12 VDC/24 VAC +10% to –15%, 50 Hz

Power Consumption 7.5 W (IR on, without heater);

22.5 W (IR on, with heater on) Power Connector 2-pin terminal block with screw terminals Video Connector BNC Alarm Output 2-pin terminal block with screw terminals

ENVIRONMENTAL

Operating Temperature –30° to 55°C (–22° to 131°F) Storage Temperature –30° to 60°C (–22° to 140°F) Operating Humidity 20% to 98%, noncondensing Storage Humidity 20% to 98%, noncondensing Impact Resistance IK10

PHYSICAL

Construction Die-cast aluminum Unit Weight 1.55 kg (3.41 lb) Shipping Weight 2.05 kg (4.51 lb)

CERTIFICATIONS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

• Meets IP66 standards

RECOMMENDED ACCESSORIES

BU-ADAPTER BU Series cameras to a wall or a ceiling

surface mounted conduit box (conduit box not included)

RECOMMENDED POWER SUPPLIES

TF2000 Power supply for one 24 VAC camera, 20 VA MCS Series Multiple 24 VAC camera power supply, indoor WCS Series Single/multiple 24 VAC camera power supply,

NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

13.23 (5.21)

9.80 (3.86)

8.83

(3.48)

outdoor

23.41 (9.22)

Ø 0.50

(0.20)

10.00 (3.94)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com

Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other

product names and services are the prope rty of their respective companies.

Product specifications and availability are subject to change without notice.