Pelco BU4-IRF4-4, BU4-IRF4-4X Specsheet

PRODUCT SPECIFICATION

camera solutions

BU4 Series Entry-Level Integrated IR Bullet Camera

1/3-INCH CCD, 540 TVL WITH HIGH SENSITIVITY, RUGGED, VANDAL-RESISTANT

Product Features

• 540 TV Lines

• High Sensitivity (Zero Lux)

• Sony

1/3-Inch Super HAD II CCD

• NextChip Digital Signal Processor (DSP)

• 12 VDC Power with Internal Synchronization

• 2D Digital Noise Reduction (DNR)

• 15 Meters of IR Illumination Distance

• Weathertight Outdoor Operation (IP66)

• Rugged, Vandal-Resistant Design (IK10)

• Environmental Capability with a Wide Operating Temperature

• Low Power Consumption

• Cable Feedthrough Mount Included

™

The BU4 Series is Pelco’s entry-level integrated IR bullet CCD camera. It uses a group of integrated infrared LEDs to deliver high quality pictures, even at night with zero illumination.

The BU4 Series is a high resolution digital camera with 540 TVL of resolution and a minimum of 0.2 lux illumination in color mode. With the included IR supplemental lighting, the BU4 Series operates under zero lux (monochrome mode). The camera uses automatic gain control (AGC) to optimize the video signal.

The BU4 Series includes automatic white balance (AWB) for difficult lighting situations and digital noise reduction (DNR) that minimizes environment noise levels to produce clear image quality.

The BU4 Series has a rugged, outdoor design and an impact resistance that meets the IK10 standard. The BU4 Series has a wide operating temperature (–30° to 50°C), which makes it an ideal solution for most rugged outdoor applications. The BU4 Series also meets weathertight IP66 standards.

Typical applications for the BU4 Series include outdoor boundary surveillance that has zero light at night and a need to supplement the scene with IR light.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3910 / REVISED 6-15-12

TECHNICAL SPECIFICATIONS

MODELS

BU4-IRF4-4 High resolution IR bullet camera, 1/3-inch

BU4-IRF4-4X High resolution IR bullet camera, 1/3-inch

CCD, 12 VDC, 3.6 mm fixed lens, NTSC format

CCD, 12 VDC, 3.6 mm fixed lens, PAL format

CAMERA/OPTICS

Imaging Sensor Sony 1/3-Inch Super HAD CCD Signal Processing NextChip DSP Effective Pixels

NTSC 768 (H) x 494 (V), approx. 380k

PAL 752 (H) x 582 (V), approx. 440k Scanning Area 5.6 (H) mm x 4.7 (V) mm (0.22 x 0.19 inch) Scanning System

NTSC 525 lines, 2:1 interlace

PAL 625 lines, 2:1 interlace Scanning Frequency Horizontal Vertical

NTSC 15.734 kHz 59.94 Hz

PAL 15.625 kHz 50.00 Hz Synchronization Internal Horizontal Resolution 540 TVL Minimum Illumination f/2.0

NTSC Color (17 ms) 0.2 lux;

PAL Color (20 ms) 0.2 lux;

IR Cut Filter Dual band OLPF IR Illumination Distance 15 m IR Sensitivity >40% at 850 nm, peak response Low-Light Technology 24 LEDs Electronic Shutter Range

NTSC Auto, 1/60 ~ 1/10,000 sec

PAL Auto, 1/50 ~ 1/10,000 sec Video Output 1.0 Vp-p, NTSC/PAL composite, 75 ohms,

Auto White Balance 2,500° to 9,500°K Signal-to-Noise Ratio 48 dB Lens Fixed Backlight Compensation Yes F-Number f/2.0 Focal Length 3.6 mm Focus Range ∞ to 1.2 m (3.9 ft) Angle of View

Horizontal 72°

Vertical 52° Adjusting Angle

Panning Range ±180°

Tilting Range ±90°

Rotation Range ±360° Digital Noise Reduction 2D

; 2,850°K; 30 IRE

Mono (with IR) 0.0 lux

BNC connector

GENERAL

Construction Die-cast aluminum Unit Weight 0.65 kg (1.43 lb) Shipping Weight 0.90 kg (1.98 lb)

ELECTRICAL

Power Requirement

NTSC 12 VDC ±10%, 60 Hz PAL 12 VDC ±10%, 50 Hz

Power Consumption 3 W (IR on, without heater);

8 W (IR on, with heater on) Power Connector 2-pin terminal block with screw terminals Video Connector BNC

ENVIRONMENTAL

Operating Temperature –30° to 50°C (–22° to 122°F) Storage Temperature –30° to 60°C (–22° to 140°F) Operating Humidity 20% to 98%, noncondensing Storage Humidity 20% to 98%, noncondensing Impact Resistance IK10

CERTIFICATIONS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

• Meets IP66 standards

RECOMMENDED ACCESSORIES

BU-ADAPTER Adapter plate for mounting BU Series

NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

10.10 (3.98)

17.10 (6.73)

6.50

(2.56)

cameras to a wall or a ceiling surface

mounted conduit box (conduit box not

included)

6.20

(2.44)

Ø 0.50

(0.20)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com

Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other

product names and services are the prope rty of their respective companies.

Product specifications and availability are subject to change without notice.