Pelco Brrdp User Manual

C939SM (1/00)
ERD97P21-U Receiver

®

3500 Pelco Way,
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel [phone]
FAX [phone]

International Customers:
Tel [phone]
FAX [phone]

www.pelco.com

This maintenance/service manual consists of an exploded assembly diagram and parts list. Use
this manual when ordering replacement parts for the ERD97P21-U Receiver.

EXPLODED ASSEMBLY DIAGRAM

Figure 1. ERD97P21-U Exploded Assembly Diagram

Table A. ERD97P21-U Exploded Assembly Parts List

Item Qty Description Part Number

15 Gland, PG-13.5, black EH470010007B
21 Base plate CM97584001COMP
33 UL barrier CM97584004COMP
42 Six-position terminal strip TRB6-141
51 Step-down transformer, 100V-24V, .7A TRF2A0003
61 Barrier gland CM975810000
71 PC option board assembly (ERD97P-AUX) PCB8500221ASSY
81 PC board assembly PCB8500220ASSY

91 Switch SWI0201S11N41P
10 3 Fuse holder FUS342012L
11 1 Fuse bracket CM97584003COMP
12 1 Box CM97584002COMP
13 5 Gland nut, PG-13.5, black EH470010008B
14 1 UL nut for EH400010003, GMP-9/PROV EH400010004
15 1 UL nut for EH300010003, GMP-7/PROV EH300010004
16 1 UL gland, SL-9 or PG-9 EH400010003
17 1 UL gland, SL-FLEX 7 or PG-7 EH300010003
18 1 Power cord WIRC1318006BL
19 1 Label LBL17006
20 1 Warning label LBL1UL04
21 4 in. O-ring cord, .139-inch diameter EH60010139
22 10 in. O-ring cord, .25-inch diameter EH60010250

A4 Screw, 10-32 x .375-inch, Phillips, pan head ZH10-32X.375SPP

B4 Screw, 6-32 x .50-inch, Phillips, pan head ZH6-32X.500SPP

C1 Spacer, .1.25 x .25-inch SPA2116-632-A

D4 Screw, 1/4-20 x 1-inch, Phillips, flat head ZH1/420X1.00SFS

E2 Spacer, 1.75 x .25-inch SPA2124-632-A

F8 Rivet ZHRIVET1/8X3/16

G3 Internal tooth lock washer, #6 ZH6LWSIS
H3 Screw, 6-32 x .375-inch, Phillips, pan head ZH6-32X.375SPP

J4 Internal tooth lock washer, .25-inch ZH1/4LWSIS

K2 Screw, 6-32 X .25-inch, Phillips, pan head ZH6-32X.250SPP

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or
workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

• Five years on FT/FR8000 Series fiber optic products.

• Three years on Genex

• Three years on Camclosure
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,
which have a five-year warranty.

•Two years on standard motorized or fixed focal length lenses.

•Two years on Legacy
fixed dome products.

•Two years on Spectra
continuous motion applications.

•Two years on Esprit

• Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura

• One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.

• Six months on all pan and tilts, scanners or preset lenses used in continuous motion
applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident
are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from
the specific use or application made of the Products. Pelco’s liability for any claim, whether
based on breach of contract, negligence, infringement of any rights of any party or product
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for
such Products. In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused,
whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have
additional rights, which are subject to variation from state to state.

®

Series products (multiplexers, server, and keyboard).

®

and fixed camera models, except the CC3701H-2,

®

, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series

®

, Esprit®, ExSite™, and PS20 scanners, including when used in

®

and WW5700 Series window wiper (excluding wiper blades).

™

Series distributed network-based video products.

REVISION HISTORY

Manual # Date Comments

C939SM 1/00 Original version.

If a warranty repair is required, the Dealer must contact Pelco at [phone] or
[phone] to obtain a Repair Authorization number (RA), and provide the following
information:

1. Model and serial number

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the
warranty conditions stated above, please include a written explanation with the product
when returned.

Method of return shipment shall be the same or equal to the method by which the item was
received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call the factory at
[phone] or [phone] to obtain an authorization number (CA number if returned
for credit, and RA number if returned for repair).

All merchandise returned for credit may be subject to a 20% restocking and refurbishing
charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA
number and freight should be prepaid. Ship to the appropriate address below.

If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:

Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are
instructed to return goods to the USA, you may do one of the following:

If the goods are to be sent by a COURIER SERVICE, send the goods to:

Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA

If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:

Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: [phone]
Fax: [phone]

Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. © Copyright 1999, Pelco.
Endura and ExSite are trademarks of Pelco. All rights reserved.