Pelco BBDF5S-F, BBDF5L-F User Manual

®

20131

BBDF5-F, BBDF5L-F,

and BBDF5S-F

Back Boxes

Installation/

Operation Manual

C1496M-A (2/02)

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel [phone] • FAX [phone]

International Customers: Tel [phone] • FAX [phone]

CONTENTS

LIST OF TABLES

Section Page

IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 3

DESCRIPTION ................................................................................................................... 3

MODELS ....................................................................................................................3

INSTALLATION ..................................................................................................................3

HARD CEILING INSTALLATION ............................................................................... 4

SUSPENDED CEILING INSTALLATION ................................................................... 5

CAMERA AND LENS INSTALLATION ....................................................................... 6

SPECIFICATIONS.............................................................................................................. 7

WARRANTY AND RETURN INFORMATION..................................................................... 8

Table Page

A Video Coaxial Cable Requirements ................................................................... 6

B 24 VAC Wiring Distances ................................................................................... 6

2 Pelco Manual C1496M-A (2/02)

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service personnel and con­form to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P en­closure, it is designed for indoor use only and it must not be installed where exposed
to rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.

5. The installation method and materials should be capable of supporting four times the
weight of the unit and equipment.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous volt­age constituting a risk of electric shock is
present within this unit.

This symbol indicates that there are impor­tant operating and maintenance instructions
in the literature accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installa­tion and operation.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

DESCRIPTION

The BBDF5-F, BBDF5L-F, and BBDF5S-F are plenum rated back boxes that can be in­stalled in hard ceiling or standard 2' x 2' (61 x 61 cm) suspended ceiling. The BBDF5-F
and BBDF5L-F require 5.25 inches (13.34 cm) of space above the ceiling, and the
BBDF5S-F needs only 2.75 inches (7 cm) of room.

MODELS

BBDF5-F Standard in-ceiling back box
BBDF5L-F Extended in-ceiling box
BBDF5S-F Shortened in-ceiling box

INSTALLATION

CONTENTS

1 Back box with tilt table assembly installed (includes camera and lens if specified with order)
1 Parts bag

1 Conduit fitting with lock nut
1 Safety chain bracket
1 3-inch miniature coaxial cable assembly
1 Compass tool
1 Flat washer (models without camera)
1 Split lock washer (models without camera)
1 Screw (models without camera)

Pelco Manual C1496M-A (2/02) 3