Pelco BB4T-F Specsheet

Page 1
PRODUCT SPECIFICATION
Spectra® IV Series Dome Systems
HIGH-PERFORMANCE INTEGRATED DOME SYSTEM
camera site
Product Features
Two Autofocus, High Resolution Integrated LowLight™ Color
Camera/Optics Packages
Zone Blanking
Window Blanking
Camera Title Overlay, 20 User-Definable Characters
On-Screen Compass and Tilt Display
Password Protection
Freeze Frame During Presets
Built-in Surge and Limited Lightning Protection
Integrated Passive UTP Circuit
Internal Scheduling Clock
Modularity
®
Spectra
IV was designed with ease of installation and ease of maintenance in mind. Each dome system consists of three components: a back box, a dome drive, and a lower dome. These three system components are interchange­able with other Spectra IV dome systems, making retrofitting and application adjustments simple. Also, dome drives and lower domes can be removed and replaced reducing maintenance time.
Back Box
Spectra IV back box options include the following models: environmental in-ceiling (ideal for outdoor soffits), indoor in-ceiling, indoor surface mount, standard and environmental pendant, heavy-duty, pressurized, and stainless steel. Each back box model features built-in camera and location-specific dome settings, including labels, presets, patterns, and zones. A for convenient video transmission through twisted pair wire. For added flexibility, Pelco fiber modules can also be attached to the door assembly for transmission over single-mode or multimode fiber.
passive UTP circuit
back box memory
is located on the door assembly
to store
Dome Drive
The Spectra IV dome drive’s advanced features that allow the system to produce high quality video in the most difficult environments. The day/night camera features 18X optical zoom and 12X digital zoom. The color camera is equipped with 16X optical zoom and 8X digital zoom. Both cameras in Spectra IV dome drives feature
LowLight
where minimal light is present. The cameras also offer
between presets
technology allowing the cameras to compensate for scenes
integrated optics package
and
window blanking.
incorporates many
freeze frame
IN-CEILING MODEL
SD418-F0
ENVIRONMENTAL PENDANT
MODEL SD4TC-PG-E0
(SHOWN WITH SWM-GY WALL MOUNT)
Lower Dome
An important, but often overlooked, component of a high-speed dome system is the relationship between the dome bubble and the camera lens. Special consideration was taken when designing the Spectra IV lower dome bubble to ensure that an optimal optical relationship between the lens and bubble was achieved, providing crystal clear video at long focal lengths.
Dome Systems
Spectra IV dome systems feature many software enhancements that increase performance and make programming and operation easy. An
scheduling clock Window blanking
privacy area. changing the system settings. Programmable
display
provides positioning information when needed. Intuitive multi­language on-screen programming can be displayed in English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech.
Spectra IV’s variable speed capabilities range from a smooth, fast pan motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree per second. The system is capable of continuous 360 degrees rotation and has an
“auto flip”
itself for uninterrupted viewing of any subject that passes directly beneath the dome.
Optional diagnostic/installation tools (IPS-RMK and IPS-CABLE) allow the installer to view video, control PTZ, and perform system setup and software upgrades at the installation site.
allows for the scheduling of presets and patterns. enables a user to program a four-sided, user-defined
Password protection
feature that allows the dome to rotate 180 degrees and reposition
prevents unauthorized users from
on-screen compass and tilt
internal
C2449 / NEW 1-07
IP66
AR
U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2; 7,161,615 B2
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Page 2
TECHNICAL SPECIFICATIONS
COMPONENT FEATURES
Back Box and Lower Dome
7.6 (19.3)
Surface Mount (Indoor)
• Available in Black or White Finish
• Installs Quickly and Easily to Any Type of Ceiling
• Quick Disconnect to Dome Drive
• Injection-Molded Plastic
In-Ceiling (Indoor)
• Single Back Box for Suspended or Hard Ceiling Applications
• Requires 5.25-Inch Space Above Ceiling and 3.25 Inches Below
• Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Suitable for Use in Environmental Air Handling Spaces
Environmental In-Ceiling
• Single Back Box for Hard Ceiling Applications
• Requires 4.4-Inch Space Above Ceiling and 4.3 Inches Below
• Includes Heater and Fan
• Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
• Quick Disconnect to Dome Drive
• Aluminum Construction
(13.2)
4.4
(11.0)
4.3
(10.9)
(8.8)
(22.0)
5.2
3.5
1.6
(4.0)
8.7
5.9 (15.0)
7.5 (19.0)
5.9 (15.0)
8.2 (20.8)
9.9 (25.2)
5.9 (15.0)
8.9 (22.6)
Standard and Environmental Pendant
• Standard and Environmental Models
• Standard Pendant Available in Black or Gray Finish; Environmental Pendant Gray Finish Only
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Environmental Model Includes Sun Shield, Fan, and Heater
(ENVIRONMENTAL DOME
WITH SUN SHROUD SHOWN)
10.6
(26.9)
5.9 (15.0)
8.6 (21.8)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
Page 3
TECHNICAL SPECIFICATIONS
Dome Drive
• 128 Presets
• ±0.25° Preset Accuracy
• Multilanguage Menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech)
• RJ-45 Data Port for Software Update and Setup
• On-Screen Compass, Tilt, and Zoom Display
• Password Protection
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Rotating Discreet Liner with Sealed Fixed Bubble
• Eight Zones (programmable in size) Can Be Labeled with Up to 20 Characters Each or Set to Output Blank Video
• Programmable Locations of Labels and On-Screen Displays
• Multiple Park and Power-Up Actions
• One Auxiliary (Form C) Relay Output and One Open Collector Auxiliary Output (can be alternately programmed to operate upon alarm)
• Patterns – One on-screen, user-defined programmable pattern. Includes pan, tilt, zoom, and preset functions
• Proportional Pan and Tilt – Continually decreases pan and tilt speeds in proportion to depth of zoom
• Variable Scan Speed – Scan speed can be programmable between 1-40°/sec
• Pan Motion Allows 0.1-150°/sec Pan Speed
• Programmable Limit Stops for Auto/Random/Frame Scan Modes
• Auto-sensing Protocol (Coaxitron®, RS-422 P and D); Accepts Competitive Control Protocol with Optional Translator Card
• Digital Position and Zoom Control and Feedback Using D Protocol
• Built-in Menu System for Setup of Programmable Functions
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
• Programmable Zoom Speeds
• One Programmable Window Blank
• Freeze Frame Between Presets
GENERAL
Construction
Back Box
Surface Mount Plastic In-Ceiling Aluminum
Pendant Aluminum Dome Drive Aluminum, thermo plastic Bubble Acrylic
Light Attenuation
Smoked 1/2 F-stop light loss Clear Zero light loss Chrome 2 F-stops light loss Gold 2 F-stops light loss
Cable Entry (Back Box)
In-Ceiling and Surface Mount 0.75-inch conduit fitting Pendant Through 1.5-inch NPT pendant mount
Weight (approximate) Unit Shipping
Back Box
Surface Mount 0.7 lb (0.32 kg) 2 lb (0.90 kg)
In-Ceiling 1.5 lb (0.68 kg) 2 lb (0.90 kg)
Environmental
In-Ceiling 2.1 lb (0.95 kg) 3 lb (1.36 kg)
Standard Pendant 2.4 lb (1.09 kg) 4 lb (1.81 kg)
Environmental Pendant 3.5 lb (1.59 kg) 5 lb (2.27 kg) Dome Drive 3.3 lb (1.48 kg) 5 lb (2.27 kg) Lower Dome
Surface Mount 0.4 lb (0.18 kg) 1 lb (0.45 kg)
In-Ceiling 0.2 lb (0.09 kg) 1 lb (0.45 kg)
Pendant and
Environmental
In-Ceiling 0.6 lb (0.27 kg) 2 lb (0.90 kg)
Environment
Surface Mount Indoor In-Ceiling Indoor Environmental In-Ceiling Outdoor Pendant, Standard and Environmental Indoor/outdoor
Operating Temperature
Surface Mount and Indoor In-Ceiling 32° to 122°F (0° to 50°C) Standard Pendant (Assumes no wind chill factor)
Maximum 113°F (45°C) absolute maximum;
95°F (35°C) sustained maximum
Minimum 25°F (-4°C) sustained minimum Environmental In-Ceiling and Environmental Pendant (Assumes no wind chill factor)
Maximum 140°F (60°C) absolute maximum;
122°F (50°C) sustained maximum
Minimum -60°F (-51°C) absolute minimum; prevents
icing at sustained minimum of -50°F (-45°C); de-ices 0.1 inch (2.5 mm) within 3 hours after
power-up Effective Projected Area (EPA) 20.5 square inches (without mount)
47 square inches (with IWM Series mount)
MECHANICAL
Pan Movement 360° continuous pan rotation Vertical Tilt Unobstructed +2° to -92° Manual Pan/Tilt Speeds
Pan 0.1°-80°/sec manual operation,
Tilt 0.1°-40°/sec manual operation
Preset Speeds
Pan 400°/sec Tilt 200°/sec
(Dome Drive Only)
150°/sec Turbo
For variable-speed operation an appropriate controller is required. (With non-variable speed control, Spectra IV pan/tilt speed is
20°/sec)
ELECTRICAL
Input Voltage 18-32 VAC; 24 VAC nominal
22-27 VDC; 24 VDC nominal Input Power
24 VAC 23 VA nominal (without heater);
73 VA nominal (with heater)
24 VDC 0.7 A nominal (without heater);
3 A nominal (with heater) Fuse 1.25 A
Page 4
TECHNICAL SPECIFICATIONS
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• UL Listed
• UL Listed to Canadian safety standards
• Complies with Argentina compliance requirements under Res. 92/98
• FCC, Class B
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2;
7,161,615 B2
Meets the following standards:
• NEMA Type 4X, IP66 when installed properly (BB4T-F-E, BB4T-PB, BB4T-PG, and BB4T-PG-E)
• NEMA Type 1, IP40 (BB4T-SMW, BB4T-SMB, and BB4T-F)
CAMERA/OPTICS
Color (16X) Day/Night (18X)
Signal Format NTSC
Scanning System 2:1 interlace 2:1 interlace
Image Sensor
Effective Pixels
NTSC PAL
Horizontal Resolution
NTSC PAL
Lens F1.4 (f = 4~64 mm optical)
Zoom Speed (optical range) 1.9/3.6/6.0 seconds 2.9/4.2/5.8 seconds
Horizontal
Angle of view Focus
Maximum Sensitivity @ 35 IRE
NTSC
PAL
Sync System AC line lock, phase adjustable via remote
White Balance Automatic with manual override Automatic with manual override
Shutter Speed
NTSC PAL
Iris Control Automatic with manual override Automatic with manual override
Gain Control Automatic with manual override Automatic/OFF
Video Output 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms
Video Signal to Noise >50 dB >50 dB
(DD4TC16)
PAL
(DD4TC16-X)
1/4-inch interline transfer CCD
768 (H) X 494 (V) 752 (H) X 582 (V)
>470 TV Lines >460 TV Lines
16X optical zoom, 8X digital zoom
43° at 4 mm wide zoom; 3° at 64 mm telephoto zoom Automatic with manual override
0.05 lux at 1/2 sec
0.05 lux at 1/1.5 sec
control, V-Sync
Automatic (electronic iris)/Manual 1/2 ~1/30,000 1/1.5 ~1/30,000
NTSC
(DD4CBW18)
PAL
(DD4CBW18-X)
1/4-inch CCD
724 (H) X 494 (V) 724 (H) X 582 (V)
>470 TV Lines >470 TV Lines
F1.6 (f = 3.8~68.4 mm optical) 18X optical zoom, 12X digital zoom
51° at 3.8 mm wide zoom; 3° at 68.4 mm telephoto zoom Automatic with manual override
0.08 lux at 1/2 sec
0.3 lux at 1/60 sec shutter
0.013 lux at 1/2 sec
0.08 lux at 1/1.5 sec
0.3 lux at 1/50 sec shutter
0.013 lux at 1/1.5 sec
Internal/AC line lock, phase adjustable via remote control, V-Sync
Automatic (electronic iris)/Manual 1/2 ~1/30,000 1/1.5 ~1/30,000
(color)
(B-W)
(color)
(B-W)
(B-W)
(B-W)
Page 5
RELATED PRODUCTS
OPTIONAL ACCESSORIES
DD5-FM Fixed camera mount adapter. Interchangeable
IPS-RMK Remote monitor kit. Stand-alone kit consist-
IPS-CABLE Remote monitor cable and software kit
IPS-RDPE-2* Remote data port. 24 VAC, wall/pole mount
TXB Series* Translator boards for AD Manchester, Hernis,
FS85011* Fiber transmitter sends one unidirectional
*If TXB or FS85011 boards are installed, it is not possible to upgrade system
operating software through the remote data port (IPS-RDPE-2).
with all Spectra IV dome drives.
ing of a 5.6-inch TFT-LCD monitor, Palm compatible handheld, cables, and carrying case. Allows viewing of camera video, local PTZ control, system setup, and system software upgrades at any installed dome.
consisting of the Spectra IV remote monitor interface cable and necessary software for use with a PC (Windows® 95, 98, Me, 2000), Palm OS compatible handheld or iPaq™ Series Pocket PC. See www.pelco.com for a list of compatible devices.
video/data breakout box. Allows ground-level control/programming and Spectra IV OS software upgrades when used with the IPS-RMK or IPS-CABLE.
Bosch (Philips, Burle), Sensormatic, Vicon, and NTCIP protocols.
composite video channel and one bidirectional data channel over one multimode or single-mode fiber optical cable.
OS
RECOMMENDED MOUNTS
Surface Mount Domes
PASMB Pendant adapter for surface mount dome,
black
SD53SM-P 2' x 2' drop ceiling panel for BB4-SMW and
BB4T-SMW series back boxes. Replaces 2' x 2' ceiling tile. Aluminum construction.
In-Ceiling Domes
SD5-P 2' x 2' drop ceiling panel, aluminum
construction. Replaces 2' x 2' ceiling tile.
SCA1 Support rails for BB4-F; for use in ceiling tile
applications.
Pendant Domes
BB5-PCA-BK** Pendant conduit adapter, black
BB5-PCA-GY** Pendant conduit adapter, gray
IWM Series Wall mount, with or without integral 24 VAC,
100 VA transformer. Black or gray finish. Can be adapted for corner, parapet or pole applications.
MRCA Ceiling mount, black
MRWA Wall mount, black
PP4348 Parapet roof mount
PP350/PP351 Parapet wall/roof mount
SWM Series Compact wall mount, black or gray finish.
Can be adapted for corner or pole applications.
**Not suitable for use with heavy-duty, pressurized, or stainless steel
Spectra domes.
IPS-RMK REMOTE MONITOR KIT
RECOMMENDED POWER SUPPLIES
MCS Series Indoor, 24 VAC power supply MCS*E Series Indoor, 24 VAC power supply WCS Series Outdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.
FS85011 FIBER MODULE
Page 6
SYSTEM AND COMPONENT MODELS
SYSTEM MODEL NUMBERS
Type Back Box Color Lower Dome 16X Color* 18X Day/Night*
Surface Mount
White
Black
In-Ceiling, Indoor
Black
In-Ceiling, Environmental**
Pendant, Standard
Pendant, Environmental**
Black
Black
Lt. Gray
Lt. Gray
*For PAL models add “-X” suffix to part number. (Example: SD4TC16-PG-E0-X)
**Environmental dome systems include a heater, fan, and the environmental pendant also includes a sun shield.
Smoked SD4TC-SMW-0 SD418-SMW-0
Clear SD4TC-SMW-1 SD418-SMW-1
Chrome SD4TC-SMW-2 SD418-SMW-2
Gold SD4TC-SMW-3 SD418-SMW-3
Smoked SD4TC-SMB-0 SD418-SMB-0
Clear SD4TC-SMB-1 SD418-SMB-1
Chrome SD4TC-SMB-2 SD418-SMB-2
Gold SD4TC-SMB-3 SD418-SMB-3
Smoked SD4TC-F0 SD418-F0
Clear SD4TC-F1 SD418-F1
Chrome SD4TC-F2 SD418-F2
Gold SD4TC-F3 SD418-F3
Smoked SD4TC-F-E0 SD418-F-E0
Clear SD4TC-F-E1 SD418-F-E1
Smoked SD4TC-PB-0 SD418-PB-0
Clear SD4TC-PB-1 SD418-PB-1
Chrome SD4TC-PB-2 SD418-PB-2
Gold SD4TC-PB-3 SD418-PB-3
Smoked SD4TC-PG-0 SD418-PG-0
Clear SD4TC-PG-1 SD418-PG-1
Chrome SD4TC-PG-2 SD418-PG-2
Gold SD4TC-PG-3 SD418-PG-3
Smoked SD4TC-PG-E0 SD418-PG-E0
Clear SD4TC-PG-E1 SD418-PG-E1
COMPONENT MODEL NUMBERS
Back Box Dome Drive Lower Dome***
BB4T-SMB Surface mount, black BB4T-SMW Surface mount, white BB4T-F In-ceiling, black BB4T-F-E In-ceiling, black, environmental BB4T-PB Pendant mount, black,
standard BB4T-PG Pendant mount, gray, standard BB4T-PG-E Pendant mount, gray,
environmental
Notes:
To order a fixed mount dome system refer to the component models above and select one each of the following: back box (BB4T-F), dome drive (DD5-FM), plus choice of lower dome (LD5F-0, LD5F-1, LD5F-2 or LD5F-3).
For environmental applications, you must order an environmental back box (BB4-F-E) or (BB4-PG-E).
DD5-FM is ideal for use with Pelco’s CCC1380UH/CCC1390/MCC1380 Series cameras with selected Pelco lenses.
***Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes. ****Not recommended for outdoor use due to possible light reflections.
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada International www.pelco.com
Tel: (800) 289-9100 • FAX (800) 289-9150 Tel: (559) 292-1981 • FAX (559) 348-1120
DD4TC16 Color (NTSC) camera (16X) DD4TC16-X Color (PAL) camera (16X) DD4CBW18 Day/night (NTSC) camera (18X) DD4CBW18-X Day/night (PAL) camera (18X) DD5-FM Removable fixed mount bracket
only (camera and lens not included). Interchangeable with all Spectra IV dome drives.
Pelco, the Pelco logo, Spectra, and Coaxitron are registered trademarks of Pelco.
LD53SMB-0 Smoked, surface, black LD53SMB-1 Clear, surface, black LD53SMB-2 Chrome, surface, black LD53SMB-3 Gold, surface, black LD53SMW-0 Smoked, surface, white LD53SMW-1 Clear, surface, white LD53SMW-2 Chrome, surface, white LD53SMW-3 Gold, surface, white LD5F-0 Smoked, in-ceiling LD5F-1 Clear, in-ceiling LD5F-2 Chrome, in-ceiling LD5F-3 Gold, in-ceiling LD53PB-0 Smoked, pendant, black LD53PB-1 Clear, pendant, black LD53PB-2 Chrome, pendant, black**** LD53PB-3 Gold, pendant, black****
Windows is a registered trademark of the Microsoft Corporation.
iPaq is a trademark of the Compaq Corporation.
Specifications subject to change without notice.
LowLight is a trademark of Pelco.
Palm is a trademark of Palm, Inc.
©Copyright 2007, Pelco. All rights reserved.
Loading...