Peiying PY-GPS5004BT User Manual

User Manual

PY-GPS5004BT

ALIEN

Polski 43-86

Românã 87-132

English 1-42

PY-GPS5004BT User's Manual

Welcome to use our GPS navigator

- We are reserves the final explanation right on this User’s Manual.

- Specifications are subject to change without notice. Sorry for any
inconvenience caused!

- Please make a copy of the important data. Factory assumes no
responsibility for the data loss.

- This manual has been carefully checked. Please contact our
service center when any typing mistake is found.

- Please read the operating instruction carefully and use the
accessories only provided by the original factory to avoid any
unexpected damage. No warranty will be executed if you are not
following the instruction or connecting with the incompatible
accessories, factory assumes no responsibility for any loss and
damage caused hereby.

- The electronic navigation data may be not in conformity with the
actual transporting marks due to the traffic construction
development. Please be sure to comply with the real road condition
and follow the traffic rules. Operating and viewing the GPS during
driving may cause severe traffic accident. Our company will not be
responsible for any loss caused by the unexpected accident.

- Users can update and upgrade software from website at his/her
option.

- Any discrepancy between the pictures with real products
hereinafter, the real ones prevail.

WWW.PEIYING.PL

PY-GPS5004BT

1

ALIEN

Table of Contents

WWW.PEIYING.PL

PY-GPS5004BT

2

ALIEN

PRODUCT INTRODUCTION 4

1.1 INTRODUCTION 4

1.2 PACKAGE 4

CHAPTER TWO FEATURES AND SPECIFICATION 5

2.1 MAIN FEATURES 5

2.2 SPECIFICATION 5

2.3 PRODUCT APPEARANCE 7

CHAPTER THREE MANUAL INSTRUCTION 8

3.1 POWER SUPPLY AND CHARGE 8

3.1.1 POWER SUPPLY 8

3.1.2 USE THE CHAGER TO SUPPLY POWER 9

3.2 POWER ON/OFF 9

3.2.1 POWER ON 9

3.2.2 POWER OFF 10

3.3 RESET SYSTEM 10

3.4 USE BRACKET TO FIX NAVAGITOR 10

3.5 STYLUS 10

3.6 T-FLASH CARD 11

3.7 CONNECT WITH COMPUTER 11

CHAPTER FOURE PRIMARY FUNCTION 12

4.1 THE MAIN INTERFACE AND FUNCTION 12

4.2 NAVIGATION FUNCTION FEATURE AND OPERATION 13
NOTES 13

4.3 BLUETOOTH OPEARTION 14

4.3.1 BLUETOOTH MAIN MENU 16

4.3.2 PHONEBOOK 16

4.3.3 CALL HISTORY 19

4.3.4 DIAL PAD 20

4.3.5 MESSAGE 21

4.3.6 FILE TRANSFER 22

4.3.7 SETTINGS 23

4.3.8 INCOMING/OUT GOING CALL 25

4.4 MUSIC PLAYER OPERATION INTERFACE 27

4.4.1 FUNCTION FEATURE 27

4.4.2 OPERATION MEATHOD 28

4.5 VEDIO PLAYER INTERFACE 30

4.5.1 FUNCTION FEATURE 30

4.5.2 OPERATION METHOD 30

4.6 PHOTO VIEWER OPERATION INTERFACE 32

4.6.1 FUNCTION FEATURE 32

4.6.2 OPERATION METHOD 32

4.7 E-BOOK OPERATION 33

4.8 SYSTEM SETTING INTERFACE 34

4.8.1 BACK LIGHT SETTING 35

4.8.2 VOLUME ADJUST 36

4.8.3 LANAUGUE SETTING 37

4.8.4 FM TRANSMITTER 37

4.8.5 DATE AND TIME SETTING 38

4.8.6 SCREEN CALIBRATION 38

4.8.7 SYSTEM INFORMATION 39

4.8.8 DEFAULT SETTING 40

4.8.9 NAVIPATH 40

4.8.10GPS INFO 41

CHAPTER FIVE
SIMPLE PROBLEM SHOOTING AND MAINTENANCE 41

WWW.PEIYING.PL

PY-GPS5004BT

3

ALIEN

Product introduction

1.1 Introduction

1.2 Package

Welcome to use the GPS navigator, which is mainly used for
navigating and also has the optional function of video playing,
audio playing, Bluetooth hands free, FM, photo viewing, and E-Book etc.

- High performance, low-power consumption MediaTek MT3351 CPU

- Comfortable user interface: simple, easy to operate;

- Power management: keep the product to work longer and more steadily;

- Data transmitting: communicate with computer through USB cable;

- Excellent in receiving signal: accurate position fixing provides
you the satisfied navigating service;

- Entertainment: MP3 and MP4 function can relieve your fatigue;
You can use it when driving, walking, riding, or waiting for a meeting;
the perfect “GPS + entertainment” function can make your life and work
more splendid.

The packing box contains the following accessories, please confirm:

1. GPS navigator

2. Car charger

3. USB cable

4. User’s manual

5. Car Bracket

6. Car Cradle
For the items listed above, please confirm the actual products.
If any damage,please contact with the distributor or the agent as soon as
possible.

WWW.PEIYING.PL

PY-GPS5004BT

4

ALIEN

Instruction

2.1 Main features

2.2 Specification

Chapter Two Features and specifications

Please read this user’s manual carefully to be familiar with all the operation
details and to make the GPS navigator performs well:

[Remark]: The instruction relates to the theme;
[Relative information]: The extending information relates to the theme;
[Note]:The notes and warnings relate to the theme. Please value and follow

these notes, otherwise it will possibly bring damage to you and others.

This user manual only adapts to our GPS navigator products.

- Operating system: Microsoft Windows CE 5.0

- 4.3’’,5.0’’ TFT LCD display with resolution of 480*272 pixels

- Hi-Fi stereo earphone and built-in Hi-Fi speaker, volume adjustable

- Button and touch-screen operation

- Built-in sensitive GPS antenna

- The navigating software could run the T-FLASHSD card directly

- Audio format supported :MP and WMA

- Video format supported: ASF,AVI,WMV

- Photo format supported: BMP,JPG

- E-book format supported: TXT

- MINI USB port

- Built-in rechargeable Li-battery which can be powered by travel and car
charger.

WWW.PEIYING.PL

PY-GPS5004BT

5

ALIEN

CPU

MediaTek MT3351

RAM

64 MBytes

Flash memory

64 MBytes

LCD display

5.0 inch TFT LCD display, resolution:
480RGB(H)x272(V)

Touch-screen

high-accuracy, endurable touch-screen

USB

USB Client 2.0, MINI USB port

Card Slot

T-Flash card slot, the maximum capacity of T­Flash Card it supports reaches to 4GB

Audio

A: Built-in high fidelity speaker
B: High fidelity stereo earphone

GPS

Cold start: <42s
Hot start: <3s(in the open area)
Warm start: <36s

Battery

Built-in rechargeable Li-battery

Battery Charging port

DC 5V port

Car Charger

DC9-24V, 5V/ 1.5A

Status of the LCD light

When charging, the red light is on; when charge
finished, the blue light is on.

Operating System

Microsoft Windows CE 5.0

Video Player

Support MPEG4, Divx 5.0, 4.0, 3.11, Xvid and
MPEG2( maximum 480*272 pixels)

Audio Player

MP3, WMA

Photo viewer

E-Album, JPG, GIF, BMP, PNG

E-Book Viewer

TXT

System setting

[FM Transmitter] [screen adjust] [Default set]
[Volume] [Power] [Backlight] [Time and Date]
[Language] [Sys Info]

Temperature

o o

Operating Temperature : 0 C to 60 C

o o

Storage Temperature : -20 C to 60 C

Working humidity range

45% to 80%RH

Storage humidity range

30% to 90%RH

Atmospheric pressure

86KPa to 106KPa

Specifications are subject to change without notice. Sorry for any inconvenience caused!

WWW.PEIYING.PL

PY-GPS5004BT

6

ALIEN

2.3 Product appearance

Power Button

Mic

LED
indicator

Earphone
Jack

T-Flash
Card Slot

Mini USB

This chapter will give an introduction of the apparent components and basic
function of the GPS Navigator and it will help you to be familiar with the basic
operation quickly.

WWW.PEIYING.PL

PY-GPS5004BT

7

ALIEN

t

t

t

3.1 Power supply and charge

3.1.1 Power supply

1

Screen

Display

2

Power button

Power on/off the device

3

LED indicator

Indicate whether there is external
power supply; When charging, the red
light is on; when charge finished, the
blue light is on.

4

Microphone

Voice input for Bluetooth hands-free

5

MINI USB and
common charging
interface

Communicate with PC and adapter via
MINI USB cable

6

T-Flash card slot

Can put T-Flash card in it. Please don’t
take away the card when the program
in the card is on!
[Note] If you have taken away the card,
please press RESET to reactive the
system.

7

Earphone jack

Connect to stereo earphone.

Chapter Three Manual Instruction

If this navigator is first used, please use AV adaptor to fully charge it.

There are three types of supplying power: battery, adaptor, USB cable.
GPS navigator uses the Li-battery to supply power when it is not connected
with adaptor. The mark [ ] on the up left of interface indicates the current
electric volume.
GPS navigator uses the external power when it is connected with the adaptor.
GPS navigator uses the USB cable to supply power when the GPS connects
to the PC. When this navigator is been used, it is not charging nor discharging.

[Remark] This machine adopt built-in, unchangeable Lithium battery. At normal
condition (if the back light is not so bright), the full charged battery can be used
for 10 hours. The actual supply hour can be different because of the different
way using the navigator. Some function (audio playing, video playing, bright
back light) will consume a large power, which will reduce the using hour.

WWW.PEIYING.PL

PY-GPS5004BT

8

ALIEN

3.2 Power on/off

3.2.1 Power on:

3.1.2 Use the car adaptor to charge

WWW.PEIYING.PL

PY-GPS5004BT

9

ALIEN

[Note] This machine adopts built-in, unchangeable Lithium battery. In order to
avoid fire and burning, please do not poke, bump or take it apart or throw it into
fire or water.

1. Connect the DC part of the adaptor with the power interface at the left side
of the unit (The power interface is same as USB interface );

2. The other part connect to the power socket, it supplies power while
charging.

[Note] Please insert the car adaptor after running the car so as not to damage
the machine by electricity collision.
[Remark] Red LED indicates it’s being charged. Please wait until it is fully
charged and don’t pull out the adaptor while charging. When it is fully-charged,
the LED will turn to Blue. If low battery or no battery, please charge it
immediately

Power on/off is controlled by [ ] button. Turn off to enter the power saving
mode, it will maintain the last operation status when boot next time.

Please check: The battery is enough, or it is connected to external power
source; Please press the [ ] on the top of the unit to boot.

[Note] If bring the unit form one place to another place, please boot until it
adapts to the environment. Big humidity fluctuation will make the mainframe
short circuited.

3.3 Reset system

3.4 Use bracket to fix navigator

3.5 Stylus

3.2.2 Power off

Press the [ ] on the top of the unit to turn off, the unit will enter the power
saving mode and maintain the last operation status when boot next time.

When use GPS in the car, you should fix the device to the part of window
besides the panel by using the bracket.

[Note] When use the bracket, please take care of the position. Please don't fix
the navigator to the position where the driver's sight is being influenced.
Please do not lay it aside freely; do not fix it to the air bag, do not lay it on the
expand range of the air bag.

[Note] Any broken stylus, ball pen or any acute and harsh object will destroy
the LCD if you use it to operate the device.

The stylus is the tool for you to use your navigator. Please keep it carefully.

1. Single click :
Singly click the screen with the stylus point.

2. Double click:
Double click the screen with the stylus point.

3. Drawing:
Click one point and hold to move on the screen.

If the system cannot work, you can reset the system by the following way:
Click the reset key on the left part of the machine to reset the system by using
the stylus, then press power key to reset system.
[relative information]: it can be no response in the following condition:

1. The shift between pictures is delayed or stopped.

2. The program select function cannot work normally, such as long time to
carry out or cannot be activated.

3. The power button can not work
[Note] The unsaved data will be lost as you reset the system when the system
has no response. Please copy the data every other time.

WWW.PEIYING.PL

PY-GPS5004BT

10

ALIEN

3.6 T-Flash Card

3.7 Connect with computer

WWW.PEIYING.PL

PY-GPS5004BT

11

ALIEN

[Note] Please do not take out the T-Flash card when the system is navigating
or playing.

[Note]

1. Don't stress or curve the T-Flash card, avoid loss and bulge.

2. Avoid high temperature or high humidity when use and store the card, don't
expose the card directly to sun light, let the card far away from liquid and
corrosive material.

3. Please pay attention to the heading when insert the T-Flash card. If you
insert the card improperly, you will damage the card.

The device can be connected with the computer through the MINI USB on its
left part. You can copy the document between navigator and computer or copy
the data from GPS navigator to computer so as to recover the data in GPS
when you are in need of them.

1. Please confirm the GPS navigator is power on;

2. Connect the MINI end [ ] of USB cable with the USB port on the left part
of GPS device and the normal end [ ] with the Host port on computer.

3. After connecting, the screen will dispaly the interface as below:

Enter the USB mode. After connection, the computer can recognize and find
the new hardware unit automatically. GPS navigator will stop operating the
current procedure and shift to the online interface.
[Note] Data security: Please copy the data to the outer storage device every
time before you update your system data. Our company takes no responsibility
to any loss of data.
[Remark] The GPS navigator will stop the operation when it is connected with
computer.

Chapter Four Primary function

4.1 The main interface and the function
Main menu as picture

Function introduction

[Note] In the process of communication, the following operations will break off
the connection with computer, the unfinished data will be lost.

1. Pull out the MINI USB cable;

2. Power off

3. Reset the system by using reset button or electric switch

4. Click the close button on the top right corner.

Navigation

Provide navigation reference

Bluetooth

Connect your mobile phone via Bluetooth for
hands-free calling

Video player

Video playing format: WMV, ASF and AVI.
Support schedule adjustment, pause, volume,
next play, full screen playing.

Photo viewer

Photo format : JPG? GIF? BMP and PNG
Support previous/next, picture rotate, picture
zoom, and auto play;

E-book

Text format: txt.
Support page option

Audio player

Audio playing format: WM9, MP3, WAV.
Support random playing, sequence playing,
repeat playing, pause, previous/next, volume

Setting

Brightness, Volume, Languages, FM (optional),
Bluetooth (optional), Time, Calibration, System,
Default

WWW.PEIYING.PL

PY-GPS5004BT

12

ALIEN

4.2 Navigation functions and features

Notes

WWW.PEIYING.PL

PY-GPS5004BT

13

ALIEN

This chapter will introduce the navigation function and notes.

According to your choice of navigation system, the GPS navigator can make
position by GPS satellite signal receiver and display on the navigation map.
The system can calculate a best route after setting the destination, which can
help users to arrive the destination safely and rapidly.
The system can let you enjoy the individual charm and enjoy your trip by many
different ways such as vision map, vivid animation, voice indication, and words
indication.
The specific navigation functions are depended on your choice of navigating
software. Please refer to the Navigation Software Instruction.

1. On map information
It is probably that the electronic navigation data is not consistent with the real
traffic instructions because of the traffic construction development. Please do
comply with the highway condition and the actual traffic rules.

2. Navigation
The navigator offers the route for the reference; determine the route by
yourself, the driver may be more familiar with the route than GPS navigator.

3. On receiving signal
Many factors such as high, dense buildings (in the tunnel, between the high
building, underground parking, under the trestle), various weather condition,
and closure of the satellite will affect the ability to receive signal so as to result
in inaccurate position, inefficiency of navigation operation and system function.

4.3 Bluetooth Operation

Step 1. Click Settings on the Phone menu.

Step 2. Click on Search Phone.

Step 3. Click on the search icon on the bottom left corner to start the
searching process.

WWW.PEIYING.PL

PY-GPS5004BT

14

ALIEN

WWW.PEIYING.PL

PY-GPS5004BT

15

ALIEN

Step 4. After the searching process is finished, look for the handset you'd like
to use and click on it.

Step 5. You can also click on the previous/next page icons to read
all the found handsets.

Step 6. Click Pair then follow the instructions on your handset to
complete the pairing process. The default PIN Code is 1234. You can also
change the PIN Code. The PIN Code that you input in the PND and Mobile
phone need to be the same code.

Step 7. Click OK then process the pair process between PND with Mobile
phone, after pair succeeds will go back to the Bluetooth Main Menu.

On the Bluetooth Menu, you can choose to manage your Phonebook, Call
History, Dial Pad, Messages, File Manager, use hands-free function, or have
further setups.

Click on the item you'd like to operate to open its window;
For more information, check the descriptions in each section.

Click Phonebook on the Phone Menu, the following screen will appear. You
can check your contact list, call log, answer or dial calls.

4.3.1 Bluetooth Main Menu

4.3.2 Phonebook

WWW.PEIYING.PL

PY-GPS5004BT

16

ALIEN

WWW.PEIYING.PL

PY-GPS5004BT

17

ALIEN

Go back to the previous level.

Download Phonebook

Phonebook Search

Storage: SIM Card

Storage: Phone memory Card

1. Click to download the phonebook from Mobile phone

2. Click to search the name in phonebook. Input the name then click OK.

1. Select a name to view the detail

2. You can click the number and it makes the call. If there only one number in
the name or the name you select is save in SIM card, it will direct make call out
when you select the name.

WWW.PEIYING.PL

PY-GPS5004BT

18

ALIEN

WWW.PEIYING.PL

PY-GPS5004BT

19

ALIEN

Click Call History on the Bluetooth Menu, the following screen will appear. You
can check your call history status and also can make a call .

Call in

Call out

Missed Call

4.3.3 Call History

Click the name and it will show the detail. You can click to dial out.

Make outgoing calls by pressing the buttons.

4.3.4 Dial Pad

WWW.PEIYING.PL

PY-GPS5004BT

20

ALIEN

WWW.PEIYING.PL

PY-GPS5004BT

21

ALIEN

Click on Message on the Bluetooth Menu, the following screen will appear.

Go to Call History

Go to Phonebook

Dial

You can click download receive and read the messages.

Incoming message

Sent our message from mobile phone

4.3.5 Message

Click on “File Manager” on the Phone Menu, the following screen will appear.
You can check the media files saved in your handset, or download to your GPS
device.

Refresh

Download file

Click import icon to download text messages that default show incoming
message, click the no. view the detail , also can click make dial out.

4.3.6 File Transfer

WWW.PEIYING.PL

PY-GPS5004BT

22

ALIEN

WWW.PEIYING.PL

PY-GPS5004BT

23

ALIEN

Select file then press download file to PND

Click Settings on the Phone Menu, the following screen will appear. You can
click on the icon to make further setups.

Search Phone Setup:

If you'd like to use a different phone, click on Search Phone to find, pair, or
get your handset connected with the GPS device.

4.3.7 Settings

Step 1. Click on Search Phone.

Step 2. If the handset you'd like to use is listed on the Paired Devices, click on
it first, then click to connect your handset to the GPS device.
Click to delete the unwanted handsets.If you don't see the handset you'd
like to use on the list, click on the search icon on the bottom left corner to
search again.

Step 3. Input the pin code the click OK if your handset's Bluetooth function
is enabled. If not, enable it first. Please use same pin code on both GPS
device and mobile phone.

WWW.PEIYING.PL

PY-GPS5004BT

24

ALIEN

WWW.PEIYING.PL

PY-GPS5004BT

25

ALIEN

File Manager : Click this to change the default path to store the
downloading files or change the ringtone of incoming call.

Connect/Disconnect from Settings page: Click this icon to
connect/disconnect the current connected phone.

When there's an incoming call, the following window will appear.

Bluetooth On/Off from Setting Page: This function is used for user
to enable or disable Bluetooth radio.

Change the path , click to change the folder

4.3.8 Incoming/Out going Call

Click to disconnect the call.

Sound come out form PND

Click to answer the call.

Mute Mic : Click this the other site will not hear what you say

Speaker volume adjust

Hide : Click to hide the Call Status Windows

If you answer the call the following windows will appear

Tools : Switch another windows to use dial pad and transfer call
sound to mobile phone .

Click during the call, the following windows will spears

WWW.PEIYING.PL

PY-GPS5004BT

26

ALIEN

WWW.PEIYING.PL

PY-GPS5004BT

27

ALIEN

Sound switch to mobile phone

The default the sound is from PND when you click the sound will be
transferred to mobile phone and the icon also be changed as , click
the sound will be transfer back to GPS device again.

Click the dial pad will appears for user to input the extension number.,
click back to last windows .

Media Player – Photo, E-book, Music, Video Playback

4.4 Music player operation interface

4.4.1 Functions and features

This chapter introduces how to use the GPS video player to play your favorite
music, and let it be your personal MP3.

The audio player supports WMA9, MP3 and WAV format, you could set the
playing sequence as you wish.
Before using the audio player, please copy your txt file to any folder.

Single click the Media button to enter multimedia menu. Single click the
Music button to open the audio player as the following picture:

4.4.2 Operation method

Previous song

Play the previous song;

Play/pause

To play and pause, single click to
pause, click again to play
continuously;

Stop

Single click to stop playing;

Next song

Play the next song;

Volume-

Single click to decrease the volume;

Volume+

Single click to increase the volume;

Close

Single click to close the audio
player;

Setting the order

Support sequence playing, loop
playing, repeat playing and random
playing.

Open the play list

Single click to display the play list,
and choose the item you like as
picture 4-4 shows;

Volume indicator

Eight levels;

WWW.PEIYING.PL

PY-GPS5004BT

28

ALIEN