Pegasus E Series Manual

PARTS CATALOG Cat. No. 8478	September, 1983

SERIES

MODELS: E32. E52. E56.

FIFTH EDITION

WiLLCOX &giBBS

From the library of: Superior Sewing Machine & Supply LLC

INTRODUCTION

This parts catalog has been arranged in the following manner. It is based on the E series machines manufactured in January, 1983.

ITJMECHANISM (Pages 2-43)

Each mechanism of the machine is shown here.

Please note that the parts described in this section are for seaming machines having the same inner moving parts.

l2JSPECIFIC PARTS (Pages 46-71)

In theE series, there are other machines than the above that use their own attachments or inner moving parts. The details of them are listed in this section.

[J]GAUGE PARTS (Pages 78-160)

On pages 78-147, the gauge parts construction charts are shown. Please note that generally, each chart shows the subclasses that perform similar sewing operations. On pages 148-160, the gauge parts lists are shown.

They are arranged in numerical order of the machine type numbers.

~REFERENCE TABLE (Pages 44-45)

The table provides an index of the machine, and its specific parts and gauge parts construction chart.

~THE MACHINE MODEL AND ILLUSTRATIONS

When a part or parts are used only in certain machine models, they are enclosed in a frame with description of the machine model.

Example----------------------------------

~

The parts @-@ on page 18 are used only for E32 and E52.

Also, the same measurement is taken when using the reference numbers only.

	Example----------------------------------	~
	The part 00 on page 2 is used only for E56.
	The parts CD®®	are used only for E32 and E52.

l6JPART NUMBER INDEX (Pages 165170)

A part number index is attached to the back of this catalog for convenience.

LZJPLEASE NOTE:

This catalog is applicable to your machine and is subject to change without notification.

TABLE OF CONTENTS				Page
Machine bed frame ··················································				2	-	3
Covers (1) ...............................................................				4	-	5
Covers (2) ..............................................		·...........	··...	6	-	7
Crankshaft drive mechanism ·····································				8	-	9
E32/E52 needle drive mechanism ..............................				10-11
E32	needle drive mechanism ···································· ·12 -13
E52	needle drive mechanism......................................			14	-15
E56	needle drive mechanism· .. ·.. ·.. ·········· ..	················ ·16 -17
Upper looper drive mechanism (1)..............................				18	-19
Upper looper drive mechanism (2)..............................				20-21
Lower looper drive mechanism ..................................				22	-23
E32	chainstitch looper drive mechanism (1)	.................		24	-25
E32	chainstitch looper drive mechanism (2)	.................		26	-27
Feed mechanism (1) .................................................				28	-29
Feed mechanism (2) .................................................				30-31

Knife drive mechanism ·············································32-33

Presser foot mechanism (1) .......................................				34-35
Presser foot mechanism (2) .......................................				36-37
Lubricating mechanism································				............. 33-39
H.R. device .............................................................				40-41
Fabric edge guide ....................................................				42-43
Specific parts ..........................................................				44-71
Thread stand·········· .. ······· .. ·..		·········· ..	······················· 7273
Parts for semi-submerged installation.........................				74-75
Accessories .............................................................				76-77
GAUGE PARTS CONSTRUCTioN CHARTS • GAUGE PARTS USTS
E32	gauge parts construction chart ............................			7897
E52	gauge parts construction chart ..................		.. ..	· · · 98-129
E56	gauge parts construction chart ........................			·130 -147
E32	gauge parts list ..............................................			148-151
E52	gauge parts list ................................		·............	·152 -156
E56	gauge parts list ................	·................	·............	157-160
Needle size and upper looper/spreader			....................	161
Needle size reference ............................................				161

Component parts list for main feed dog complete···· ·162

E series machine classification ·······························'163

Part number index ................................................

165-170

--1--

From the library of: Superior Sewing Machine & Supply LLC

- 2 -

From the library of: Superior Sewing Machine & Supply LLC

MACHINE BED FRAME

REF.						QT.	MEMO
NO.	PART NO.	NAME
1	21021.8-··HD	MACHINE		ARM	<RIGHT>	1
2	210001-·HD	MACHINE		ARM		1
3	507'8	SCREW				4
4	210002	GASKET				1
5	211 ~~l~2	PLUG				1
6	210526	NAME	PLATE			1
-(	535-?	SCREW				1
8	210219--HD	MACHINE		ARM	<LEFT>	1
9	516~~	SCREW				3
1.0	21.0220	GASKET				1
11	201.002	PIN				2
12	206665	PIN	PIPE			1
1~~	210528	OIL		RUBBER		1
1.4	1.98192	CUSHION				1
15	2021"74	OIL	WICK			1
1.6	21.0008	COVER PLATE				1
1"7	4009-1	SCREW				5
18	5l~82	SCREW				2
19	210009	GASKET		BED		1
20	212:527--FD	MACHINE				1
21.	212:.~28-FD	MACHINE		BED		1
22	51...31...	SCREW				1
2:~	2913-1	SCREW				4
24	~3=~~~2	SCREW				4
25	201002	PIN				2
26	204828	PLUG				1
27	204828	PLUG				1
28	20817~S	PLUG				1
29	210003	PLUG				1
:50	21.81."?3	PLUG				1
=~1	209084	PLUG				1
:-s2	21000~)	COVER PLATE				1
~~=~	5L~59	SCREW			PIPE	6
34	21058:5	OIL	RETURN			1
~~5	210010	OIL	SHIELD			1
:-s6	202526	NAME	PLATE			1
:s-7	212280	TYPE	PLATE			1
:58	21.06"79	PIN		BED	BOTTOM PIN	2
39	204006	MACHINE				4

- 3 -

From the library of: Superior Sewing Machine & Supply LLC

E 32 (2N)

PLEASE NOTE·

		be			h.
*SoDifferentplease partrefer·mayto th useld depending on the rna
page 44-4		e co umn of the		. .	c me.
46-71	.	5 and confi'm the c		spec>f>c parts on
			orrect part on		pages

- 4 -

From the library of: Superior Sewing Machine & Supply LLC

COVERS (1)

REF~	P{~RT NO.	NAME				MEMO
NO.					Q"f
*1	21088:~	CLOTH	PLATE	<WIDE>	1
*2	21. 002.7···-FB	SIDE	COVER	<FOR 210883>	1
* :s	210881	CLOTH	PLATE	<NARROW>
*1.1.	21. 0026··-F·B	SIDE	COVER	<FOR 210881>	1
5	1.~009····1	SCREW			3
6	2020~)8	W{~SHER			3
"?	210025	CUSHION RUBBER			:~
8	210022	I....ATCH	PIN		1
<)	1:.s7906	WASHER			1
10	21.1 :soo	NUT			1.
11	21. 002L~	SPRING			1
1.2	2028"75	WASHER			2
1:.s	~)012	SCREW			2
1.~.	21.0020	WASHER			1
15	1921::so	SPRING			1
16	st.~8:.s	SCREW			1
1"7'	:~01.~1.~	NUT			1
1.8	1. 1. "7 ,...	SCREW			1
19	::S091	NUT			1
20	21.0022	CLOTH	PLATE	LATCH PIN	1
21.	21 002~:>	CUSHION RUBBER			2
22	21.0021.	l....f.,l"CI···I			1.
23	51.~88	SCREW	SPRING		1
24	21002:)	LATCH			1.
25	20821.~5	WASHER			1
26	lt... ::s~=:;	SCREW			1
2"(	1.459	SCREW			1
28	210006	FEED	ECCENTRIC COVER		1
29	~j/.~80	SCREW			2
:so	21.000"7	FEED	Bf.'R COVER		1
::s1	2905	SCREW			2
:s2	21011."7	UPPER	LOOPER HOLDER COVER		1
:s::s	4009-1	SCREW			5
34	210885	CLOTH	PLATE	<WIDE><2N>	1

- 5 -

From the library of: Superior Sewing Machine & Supply LLC

E56

PLEASE NOTE:

*Different part may be used depending on the machine. So please refer to the column of the specific parts on page 44-45 and confirm the correct part on pages 46-71.

t-----=o---~ *

~-----l *

*

- 6 -

From the library of: Superior Sewing Machine & Supply LLC

COVERS (2)

REF.

NO. PART NO.

1210034-HD

25095

3210035

45198

5210036

65060

7210037

84009-1

9210028-FD

105117

11211959-HD

125598

13211958

145292

15210223

161216

17205723

18208747

191175-3

20210029-HB

21202516-HD

22210030

232918

24210031

255117

26205688

275010

283091

29137906

30210224

312905

32210032

33210033

345117

35210221

362905

*37 210270

*38 210225

*39 210041

40210042

41208009

42200555

435292

44210043

45210047

46137906

471202

48210046

495458

50210045

511216

52210044

532905

54211389

555328

56211390

575053

58211804

595012

NAME					QT.	MEMO
TOP	COVER				1
SCREW					5
0 RING					1
SCREW		GUIDE	BAR		1
THREAD					1
SCREW					1
BRACKET					1
SCREW					1
BELT	COVER				1
SCREW					3
NEEDLE		THREAD COVER			1
PIN-SCREW					1
SPRING					1
SCREW					1
SPRING					1
SCREW					1
NAME	PLATE				1
EYE	GUARD COMPLETE				1
SCREW		THREAD		COVER	2
NEEDLE					1
HINGE		PIN			1
HINGE					1
SCREW		SPRING			2
HINGE					1
SCREW					1
EYE	GUARD COMPLETE				1
SCREW					2
NUT					2
WASHER		GUARD			2
FABRIC					1
SCREW		GUARD			2
FABRIC				GUARD	1
BRACKET/FABRIC					1
SCREW			LEFT COVER		2
MACHINE ARM					1
SCREW		COVER			2
FRONT					1
FRONT		COVER			1
FRONT		COVER			1
HINGE					1
PIN					1
RETAINING RING					1
SCREW		SPRING			2
HINGE					1
GASKET					1
WASHER					3
SCREW					3
GUIDE					1
SCREW					2
HOOK	SPRING				1
SCREW					2
HOOK	SPRING				1
SCREW					1
COVER					1
SCREW					2
COVER					1
SCREW					2
STOPPER					1
SCREW					1

- 7 -

From the library of: Superior Sewing Machine & Supply LLC

E52, 56

E32

,/1/

'I

I

I

I

I

I

I

I

I

I

I

I

I	'
1..-/

*Different part may be used depending on the machine. So please refer to the column of the specific parts on

page 4445 and confirm the correct part on pages 46-71.PLEASE NOTE:

I

I

I

I

I '

!..-'

I

31

~

30

- 8 -

From the library of: Superior Sewing Machine & Supply LLC

CRANKSHAFT DRIVE MECHANISM

REF.	PART NO.	NAME			MEMO
NO.				(~T.
* 1.	21.0228	CRANKSHAFT		1.
2	21 oot.~8	CRANKSHAFT		1
~~	1.459	SCREW		5
1...	141...8	SCREW		2
5	210062	BALANCE	WEIGHT	1
6	5029	SCREW	WEIGHT	2
-?	211.:~41	BALANCE		2
8	5029	SCREW		4
9	204881	HOUSING		1
10	201....7~3'7	HOUSING		1
11	5~328	SCREW		/.~
12	201... ~~19	G{~SKET		1
1=~	2048 7:~	CRANKSHAFT EXTENSION		1
14	549'7	SCREW		1
16	201... 010	BALL BEARING		1.
1-?	204'789	THRUST	W?~SHER	1.
18	211 ~i33	BUSHING		1.
19	21.1527'	RETAINING RING		1
20	211525	BALL. BEARING		1
21	211530	WORM		1
22	51....61.	SCREW		1
23	211526	BALL. BEARING		1
24	211 ~)29	PLATE SPRINB		1
2~)	21 00~)6	OIL SEAL		1
26	21005'7	0 RING		1
27	211.528	BALL BEARING RETAINER		1
28	511-?	SCREW		3
29	21.0055	0 RING	FAN	1
:~o	21. oo ~58	COOLING		1
:~1	211:~4~j-HD	MACHINE	PULLEY	1
:~2	552~~	PIN·-SCREW		1
=~:~	50~)0	SCREW	WASHER	1.
~3l..	201... 29~~	SPRING		1
~~5	5~)22	SCREW		1

- 9 -

From the library of: Superior Sewing Machine & Supply LLC

I

I

I

I

i~

I	I
,.. / ~	I
,	I
;	I
'	I
	I
	I

11

I

I

I

\

I

\

I

\

I

I

24

I

\

\

)

_...

// I

I

I

I

I

I

I

I

I

I

I

-<~ :

®//)

/

/

39

I

I ,......,.."'

v/

33

PLEASE NOTE·

Different part •					be used depending on				h
*So please refermayt								~
page 44-			an	do the column of the					~ machine.
4671	·	45			confirm the		specific parts on
						correct part on pages

- 10 -

From the library of: Superior Sewing Machine & Supply LLC

E32/E52 NEEDLE DRIVE MECHANISM (1)

REF.		NAIY!E			QT.	MEMO
NO.	PART NO.
1.	21. 02:~9	HOLDER			1.
2	21. 021.~.o	PIN			1
=~	~jl~85	SCREW			1
4	21.021... 1	W?,SHER			1
5	2121.86	OIL	WICK		1
6	21.0057	0 RING			1.
..(	2102l~2	BUSHING			1
8	21:~=~--1.	SCREW			1
9	201.056	THRUST COI....L.. AR			1
10	1.45'7	SCREW			2
11.	21 02:~5	L.EVER/NE:EDI....E		DRIVE	1
1.2	2021.'75	OIL. WICK			1
1. :~	2102:~8	NEEDLE BEJ,RING			1.
1.4	21.02:~6	WASH[ I~			1
1. ~j	~)022	SCREW			1
16	21.02:~2	SH?,FT/NEEDI....E		DRIVE	1.
1'7	21 024:~	NEEDLE HOLDER		GUIDE	1
1.8	21.023.7A	PIN			1
19	5292	SCREW			1
20	2021 '7~5	OIL	WICK		1
21.	240148	PLUG			1
22	21.024.4	STUD	RING		1.
2:~	2025'?'?	STOP			1
24	2021'76	OIL	WICK		1
25	~)292	SCREW			1
26	2021.'71....	OIL..	WICK		2
2'7	210069	OIL	SF?''--		1
28	2102:S4	BUSHING			1
29	210511	BALANCE WEIGHT			1
=~o	50~59	SCREW			2
* ~31	21 o2:~o	CRANK/NEEDLE		DRIVE/STD LIFT	1
32	~51+ ~j'7	SCREW			1
33	210229	CONNECTION/NEEDLE DRIVE			1
31....	5~3'76	SCREW			2
:s5	20l~146	PIN			1
:s6	51.... 61.	SCI~EW			1.
=~-r·	20163~)	COLL?'R			1
:~8	~j060	SCREW			2
39	21 023:~	BUSHING			1.

-11-

From the library of: Superior Sewing Machine & Supply LLC

~

'I

CD For 5-thread (stitch type 516).

®For 4-thread (stitch type 515).

@For chainstitch.

@For overlock.

PLEASE NOTE:		ts	Please confirm the
'tr This is one	of the gauge par	.	78-147 or by the
correct Part	by the charts on pages

lists on pages 148-160.

- 12 -

From the library of: Superior Sewing Machine & Supply LLC

E32 NEEDLE DRIVE MECHANISM

REF.	P_ART NO.	NAME									QT.	MEMO
NO.
1	210529	TENSION		NUT	COMPLETE						1
2	208447	POST NUT									1
3	208448	SPRING	BUSHING				<HEAVY>				1
4	20103'7	TENSION		SPRING							1
5	208450	CUP									1
6	210319	DISK									2
7	208449	FELT									1
8	5082A	POST	TENSION				COMPLETE				1
9	210531	THREAD									1
10	201068	TENSION		SPRING			(LIGHT)				1
11	202849	GUIDE/1		NDL							1
12	210090	GUIDE/2		NDL		GUIDE		RIGHT			1
13	210264	NEEDLE	THREAD								1
14	5117	SCREW	THREAD			GUIDE		CENTER			1
15	210722	NEEDLE									1
16	5117	SCREW	THREAD			TAKEUP					1
17	211898	NEEDLE									1
18	1175-3	SCREW	THREAD			GUIDE		LEFT			2
19	210313	NEEDLE									1
20	5117	SCREW									1
21	210749	NEEDLE	THREAD			RETAINER					1
22	210260	BRACKET									1
23	1229	SCREW									1
24	210750	GUIDE									1
25	210751	SPRING									1
*26	xxxxxx	NEEDLE	HOLDER								1
27	5292	SCREW									2
*28	XXXXXX	NEEDLE									2
29	5292	SCREW									2
*30	XXXXXX	NEEDLE	PLATE								1
31	5484-HC	SCREW			NEEDLE			GUARD		FRONT	2
32	210278	CHAINSTITCH									1
33	5328	SCREW	GUARD		BRACKET						1
34	210277	NEEDLE									1
35	5002	SCREW									2
36	210279	CHAINSTITCH			NEEDLE			GUARD		REAR	1
37	5492	SCREW									2
*38	210276	OVERLOCK		NEEDLE			GUARD		REAR		1
39	5492	SCREW		NEEDLE			GUARD		FRONT		2
40	210275	OVERLOCK									1
41	5492	SCREW									2
*42	210724	MOVABLE		NEEDLE			GUARD				1
43	5501	SCREW									1
44	210930	WASHER		ASSEMBLY/NEEDLE						PLATE	1
45	211392	BRACKET									1
46	5357	SCREW		COMPLETE							2
47	210922	SUPPORT									1
48	5501	SCREW									2
49	210898	WASHER									2
50	210923	GUIDE									1
51	1459	SCREW									1
							- 13 -

From the library of: Superior Sewing Machine & Supply LLC

~!® 2<'eedle

.. ~ b~

h®

!!

I

2 pieces for 2-needle.

l

CD

erlock.

For 3-thread ov 504 512 514).

1 (for stitch types

'

'

-

For 2-thread overlock.

L® l(for stitch type 503)

_J

PLEASE NOTE:

d depending on the machine.

*Different part may be u~

n of the specific parts on

So please refer to the f~o u~he

correct part on pages

page

44 - 45 and

con trm

46-71.

ge

parts.

PI

e

ase confirm

the

A This

is one of the gau

h

pages 78-147 or by t e

w correct part by the charts on

lists on pages 148160.

- 14 -

(ir

I I

I I

I

I

From the library of: Superior Sewing Machine & Supply LLC

E52 NEEDLE DRIVE MECHANISM

REF.								QT.	MEMO
NO.		PART NO.	NAME
*	1	210529	THREAD	TENSION		COMPLETE		1
	2	20844'7	POST NUT					1
	3	208448	SPRING	BUSHING				1
*	4	201037	TENSION	Sfl>R INC:i		<HEAVY>		1
	5	208450	CAP					1
	6	210~319	DISC					2
	7	208L~49	FELT					1
	8	5082A	SCREW STUD					1
*	9	2105:~1	THREAD	TENSION		COMPLETE		1
*10		201068	TENSION	SPRING		(LIGHT)		1
	11	2028L~9	TENSION	GUIDE		NDL		1
	12	210090	TENSION	GUIDE/2			RIGHT	1
	13	210264	NEEDLE	THREAD	GUIDE			1
	14	511'7	SCREW					1
*15		211 =~98	NEEDLE	THREAD	TAKE UP			1
	16	11'75-3	SCREW	THREAD	GUIDE		CENTER	2
	17	211t..OO	NEEDLE					1
	18	511'7	SCREW					1
	19	211:~99	NEEDLE	THREAD	GUIDE		LEFT	1
	20	5117	SCREW					1
	21	210'749	NEEDLE	THREAD	RETAINER			1
	22	210260	BRACKET					1
	23	1229	SCREW					1
	24	210750	GUIDE					1
	25	210751	SPRING					1
	26	211 :~48	THREAD	GUIDE/NEEDLE			HOLDER	1
*27		211358	NEEDLE	HOLDER				1
1:I28		xxxxxx	NEEDLE	HOLDER/2-NEEDLE				1
	29	5292	SCREW					2
1:I30		xxxxxx	NEEDLE					1
	31	5292	SCREW	PLATE				1
1:I~S2		xxxxxx	NEEDLE					1
	3~~~	5t..84-HC	SCREW	GUARD	<FRONT>			2
1:I3t...		xxxxxx	NEEDLE					1
	35	5328	SCREW					1
1:I36		210"?24	NEEDLE	GUARD	<REAR>			1
	3"?	5501	SCREW					1
	38	210930	WASHER	ASSEMBLY/NEEDLE PLATE				1
	:~9	211392	BRACKET					1
	t...o	5:~57	SCREW					2
	41	210922	NEEDLE	PLATE	SUPPORT		COMPLETE	1
	42	5501	SCREW					2
	4:~	210898	WASHER					2
	,...4	21092~S	GUIDE					1
	45	1l~59	SCREW					1
	46	21.0084	NEEDLE	GUARD	BRACKET			1
	4"?	1175--3	SCREW		<REAR>			2
1:I48		XXX XXX	NEEDU:: GUARD					1
	t..9	1202	SCREW					1

- 15 -

From the library of: Superior Sewing Machine & Supply LLC

g

I

44

*~~~e/

								~	34	'-/	'i-® .45 *
									''	35\	I
											I
									~~		----------- _J
										1- -
										1
										I
										!3}~5ri~~
.----_!._(.for stitch types 504 5i2 5
CD	~pie3ces for 2-needle.									~,'
		or -thread overlock
®	F		'		, 14)					~@
		or 2-thread overlock		·
	(for stitch type 503)
PLEASE NOTE·
*Different part ·may be
So please refer to the ~~d depending on the machine
page 4445			umn of the sp					'f	·
46-		71.	and confirm th		e correct			eel IC parts on
								part on pages
1:? This is one of th
correct part			by the ghauge parts. Please conf						the
r	t		e c arts on					1rm
ISs on pages 148-160.					pages 78-147 or by the

- 16 -

From the library of: Superior Sewing Machine & Supply LLC

E56 NEEDLE DRIVE MECHANISM

REF.			NAME					QT.	MEMO
NO.		PART NO.
*	1	210529	TENSION	NUT COMPLETE			<HEAVY>	1
	2	208447	POST NUT					1
	3	208448	SPRING	BUSHING				1
*4		201037	TENSION SPRING			<HEAVY>		1
	5	208450	CUP					1
	6	210319	DISC					2
	7	208449	FELT					1
	8	5082A	POST					1
*	9	210531	TENSION	NUT COMPLETE			(LIGHT)	1
*10		201068	TENSION SPRING			(LIGHT)		1
	11	202849	TENSION	GUIDE/1		NDL		1
	12	210090	TENSION GUIDE/2			NDL	RIGHT	1
	13	210089	NEEDLE	THREAD GUIDE				1
	14	2905	SCREW					1
	15	210087	BRACKET					1
	16	5117	SCREW	THREAD	GUIDE		CENTER	1
	17	210088	NEEDLE					1
	18	5117	SCREW	THREAD	GUIDE		LEFT	1
	19	210086	NEEDLE					1
	20	5117	SCREW					1
	21	210070	NEEDLE	ARM/1	NDL			1
	22	210071	NEEDLE	ARM/2	NDL			1
	23	5485	SCREW					1
*24		xxxxxx	NEEDLE	CLAMP/1		NDL		1
	25	201031A	NEEDLE					1
*26		xxxxxx	NEEDLE	CLAMP/2		NDL		2
	27	202273	NEEDLE					1
	28	201239A	NEEDLE	CLAMP	SCREW			1
	29	3044	NUT					1
	30	210516	NEEDLE SHIM 1. 5MM					1
	31	210085	NEEDLE	THREAD	TAKEUP			1
	32	1196	SCREW					1
	33	205737	WASHER					1
	34	210069	OIL SEAL					1
	35	210068	BUSHING					1
	36	201635	COLLAR					1
	37	5060	SCREW		DRIVE			2
	38	210066	SHAFT/NEEDLE					1
	39	210063	CONNECTION/NEEDLE DRIVE					1
	40	5376	SCREW					2
*41		210064	CRANK/NEEDLE		DRIVE/STD LIFT			1
	42	5457	SCREW	WASHER				1
	43	206180	THRUST					1
	44	210067	BUSHING					1
*45		XXXXXX	NEEDLE	PLATE				1
	46	5484-HC	SCREW	ASSEMBLY/NEEDLE PLATE				2
	47	211392	BRACKET					1
	48	5357	SCREW					2
*49		xxxxxx	NEEDLE	GUARD	FRONT/1		NDL	1
	50	5328	SCREW					1
	51	210922	NEEDLE	PLATE	SUPPORT		COMPLETE	1
	52	5501	SCREW					2
	53	210898	WASHER					2
	54	210923	GUIDE					1
	55	1459	SCREW					1
	56	210084	NEEDLE	GUARD	BRACKET			1
	57	1175-3	SCREW					2
*58		XXXXXX	NEEDLE GUARD		REAR			1
	59	1206	SCREW					1

- 17 -

From the library of: Superior Sewing Machine & Supply LLC

E56

*Different part may be used depending on the machine. So please refer to the column of the specific parts onPLEASE NOTE:

page 44-45 and	confirm the correct part on pages	E52, 32	*
46-71.

- 18 -

From the library of: Superior Sewing Machine & Supply LLC

UPPER LOOPER DRIVE MECHANISM (1)

REF.										QT.
NO.		PART NO.	NAME								MEMO
*	1	210531	TENSION		NUT	COMPLETE		<LIGHT>		1
	2	20844-?	POST NUT							1
	3	208l~48	SPRING		BUSHING					1
*	4	201068	TENSION		SPRING		<LIGHT>			1
	5	208450	CUP							1
	6	210319	DISC							2
	7	208449	FELT							1
	8	5082A	POST		GUIDE					1
	9	202849	TENSION							1
	10	201439A	EYELET							2
	11	204657	THREAD		TUBE					1
	12	210349	LOOPER		THREAD		GUIDE	PLATE		1
	13	2905	SCREW	LOOPER		THREAD		GUIDE		3
	14	210350	UPPER							1
	1c·	5519	SCREW							1
	.J
	16	202875	WASHER		THREAD		GUIDE	PLATE		1
	17'	21 o:~44	LOOPER							1
	18	2905	SCREW	LOOPER		THREAD		GUIDE		3
	19	21 o:~t~s	UPPER							1
	20	2921	SCREW							1
	21	202875	WASHER		GUIDE					1
	22	202860	THREAD							1
	23	2921	SCREW							1
	24	202875	WASHER						DRIVE	1
	25	210091	CONNECTION/UPPER LOOPER							1
	26	5376	SCREW							4
	27'	210093	BLOCK/CONNECTION							1
	28	210585	WASHER							1
	29	12:~1	SCREW							1
	30	210092	GUIDE/CONNECTION							1
	31	55l~6	SCREW							1
	=~2	202286	WASHER			LOOPER/STD			LIFT	1
*:~3		210733	CRANK/UPPER							1
	31...	5457	SCREW							1
*35		210098	WASHER							1
*36		.206180	THRUST		WASHER					1
	37'	210099	SHAFT/UPPER			LOOPER DRIVE				1
	38	210100	WASHER							1
	39	2193	SCREW							1
	40	202286	WASHER							1
	41	210102	BUSHING							1
	42	210101	BUSHING							1
	43	210103	OIL SEAL							1
*44		21 o:~51	UPPER	LOOPER		THREAD		TAKEUP		1
	45	210346	UPPER LOOPER THREAD TAKE UP							1
	46	2902	SCREW							1

- 19 -

From the library of: Superior Sewing Machine & Supply LLC

*

I

I

I

I

I

I

/

" "

PLEASE NOTE·
*Different part .may be						used depending on th
So please refer
page	44-45 ,			to the column of the ,					. ~ machine.
46-71			and confirm				the c	specific parts on
-tl .		·	~=~~si	4~h~~:0arts·				orrect	part on pag.,;
lists on							on pa~es~:~~~~~;rbmY the
This is one of th					e gauge		parts	PI
correct			b

- 20 -

From the library of: Superior Sewing Machine & Supply LLC

UPPER LOOPER DRIVE MECHANISM (2)

REF.							QT.	MEMO
NO.	PART NO.	NAME
* 1	210104	LEVER/UPPER			LOOPER	HOLDER	1
2	5284	SCREW					1
* 3	210748	UPPER		LOOPER	HOLDER	ASSEMBLY	1
4	210106	UPPER		LOOPER	HOLDER	HOLDER	1
5	210107	GUIDE/UPPER			LOOPER		1
* 6	XXXXXX	UPPER		LOOPER			1
-,	1998-2	SCREW					1
* 8	xxxxxx	SPREADER					1
9	210105	PIN					1
10	5292	SCREW					1
11	202175	OIL	WICK				1
12	204274	OIL.	FELT				1
13	204274	OIL	FELT				1
14	21.0110	BUSHING			PLUG		1
15	210111	OIL	RELEASE				1
1.6	202174	OIL	WICK				1
17	210112	OIL	FELT				1
1.8	210113	SET	PLATE				1
19	4009-1	SCREW					1
20	21.0'721	OIL	FELT				1
21	211995	UPPER		LOOPER	HOLDER	BASE	1
22	2101.08	BASE/UPPER LOOPER HOLDER GUIDE					1
23	210109	BUSHING					1
24	5408	SCREW					1
25	5282	SCREW					2
26	210118	GASKET					2
27	202175	OIL	WICK				1
28	212116	OIL	FELT				1
29	210115	SET	PLATE				1
30	5012	SCREW					2
:~1.	204657	THREAD		TUBE			1
32	5292	SCREW					1
33	208173	CAP					1

- 21 -

From the library of: Superior Sewing Machine & Supply LLC

E 3t 52

E56

PLEASE NOTE:

*Different part may be used depending on the machine. So please refer to the column of the specific parts on page 4445 and confirm the correct part on pages 46-71.

*This is one of the gauge parts. Please confirm the correct part by the charts on pages 78-147 or by the lists on pages 148-160.

- 22 -

From the library of: Superior Sewing Machine & Supply LLC

LOWER LOOPER DRIVE MECHANISM

REF.	PART NO.	NAME				QT.	MEMO
NO.
1	210530	TENSION NUT		COMPLETE <MEDIUM>		1
2	208447	POST NUT				1
3	208448	SPRING	BUSHING			1
4	201086	TENSION SPRING <MEDIUM>				1
5	208450	CUP				1
6	210319	DISC				2
7	208449	FELT				1
8	5082A	POST				1
9	202849	TENSION GUIDE				1
10	201439A	EYELET				2
11	204657	THREAD	TUBE	RIGHT		1
12	211391	THREAD GUIDE				1
13	5519	SCREW				1
14	202875	WASHER				1
*15	211402	THREAD GUIDE CENTER				1
16	5441	SCREW	GUIDE	<RIGHT>		1
17	201089	THREAD				1
18	5519	SCREW
19	202875	WASHER	GUIDE	<CENTER>		1
20	202859	THREAD				1
21	5519	SCREW				1
22	202875	WASHER	LOOPER	THREAD	GUIDE	1
23	210347	LOWER				1
24	4009-1	SCREW				1
25	210091	CONNECTION/LOWER LOOPER DRIVE				1
26	5376	SCREW				4
27	210093	BLOCK/CONNECTION				1
28	210585	WASHER				1
29	1231	SCREW				1
30	210092	GUIDE/CONNECTION				1
31	5546	SCREW				1
32	202286	WASHER				1
*33	210736	CRANK/LOWER		LOOPER	DRIVE/H LFT	1
34	2022-4	SCREW				2
*35	204789	THRUST WASHER				1
*36	210734	CRANK/LOWER LOOPER DRIVElS LFT				1
37	5457	SCREW				1
*38	210122	WASHER		LOOPER	LEVER
39	210281	SHAFT/LOWER				1
40	210123	SHAFT/LOWER		LOOPER	LEVER	1
41	204107	THRUST	WASHER			1
42	2193	SCREW				1
43	202286	WASHER				1
44	210125	BUSHING				1
45	210124	BUSHING				1
46	210586	OIL SEAL		LEVER/FOR 210724		1
47	210725	LOWER	LOOPER			1
48	210126	LOWER LOOPER LEVER				1
49	5487	SCREW				1
*50	xxxxxx	LOWER LOOPER				1
51	1175-2	SCREW	GUIDE	<LEFT>		1
52	210353	THREAD				1
*53	211401	LOWER	LOOPER	THREAD	TAKEUP	1
54	210348	LOWER	LOOPER	THREAD	TAKEUP	1
55	2902	SCREW				1

- 23 -

From the library of: Superior Sewing Machine & Supply LLC

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

<,,

',

'',

',

18

SE NOTE:			Please confirm the
PLEA .	~	f	gauge pa<ts. 78-147 "' by the
~This ts one			the charts on pages
correct part	Y		-160.

lists on pages 148

- 24 -

From the library of: Superior Sewing Machine & Supply LLC

E32 CHAINSTITCH LOOPER DRIVE MECHANISM (1}

REF.	PART NO.	NAME		QT.	MEMO
NO.
1	210298	LOOPER HOLDER		1
2	5487	SCREW		1
3	20l~293	WASHER		1
* 4	210:~~;)'7	CHAINSTITCH	LOOPER	1
5	117'5-2	SCREW		1
6	210299	LOOPER REGULATOR		1
7	2922	SCREW	DRIVE	1
8	210294	CRANK/LOOPER		1
9	5457	SCREW		1
10	201... 29~~	WASHER		1
11	208194	LINK/LOOPER	DRIVE	1
12	208195	PIN		2
13	5:~28	SCREW		2
14	5081...	SCREW		1
15	2021"?6	OIL WICK		2
16	208196	SHAFT/LOOPER	DRIVE	1
1"7	210296	BUSHING		1
18	210297	BUSHING		1
19	210586	OIL SEAL	AVOID	1
20	210288	LEVER/LOOPER		1
21	5461	SCREW		2
22	210289	BLOCK		1
23	208028	WASHER		1
24	208029	COLLAR		1
25	5084	SCREW		1
26	5353	NUT		1

- 25 -

From the library of: Superior Sewing Machine & Supply LLC

l'l

- 26 -

From the library of: Superior Sewing Machine & Supply LLC

E32 CHAINSTITCH LOOPER DRIVE MECHANISM (2)

REF.	PART NO.	NAME				QT.	MEMO
NO.
1	210:~09	LOOPER	THREAD	GUIDE	REAR	1
2	5458	SCREW	THREAD	TUBE		1
3	210:~10	LOOPER				1
4	206115	TUBE CLAMP				2
5	211:~86	BRACKET/LOOPER THREAD TENSION				1
6	5459	SCREW				1
7	5526	NUT	SPRING			1
8	211388	TENSION				1
9	1:~7108	DISC	POST			2
10	211387	TENSION				1
11	3044	NUT		AVOID		1
12	212029	SHAFT/LOOPER				1
13	204107	THRUST	COLLAR			1
14	2193	SCREW				1
15	210125	BUSHING				1
16	210293	COLLAR				1
1"('	5084	SCREW				2
18	210292	BUSHING				1
19	205088	PLUG		AVOID		1
20	210287	CRANK/LOOPER				1
21	5457	SCREW				1
22	210284	CONNECTION/LOOPER AVOID				1
23	205015	NEEDLE	BEARING			1
24	210283	COLLAR				1
25	5495	SCREW				2
26	210285	PIN				1
27	202l~33	WASHER				1
28	5455	NUT	THREAD	TAKEUP		1
29	210:~00	LOOPER				1
30	5292	SCREW				2
31	210304	LOOPER	THREAD	GUIDE	BRACKET	1
=~2	5494	SCREW				1
=~3	210307	WASHER		THREAD	TAKEUP	1
34	210302	GUIDE/LOOPER				1
35	1216	SCREW				1
36	210303	EYELET/LOOPER		THREAD	fAKEUP	2
37	5077	SCREW				2
38	210:~08	STOPPER				1
39	5453	SCREW				1
40	210306	SPRING				1
41	1234	SCREW				1
42	1:3"7906	WASHER	THREAD	GUIDE	FRONT	1
43	210:~11	LOOPER				1
44	4009-1	SCREW				1

- 27 -

From the library of: Superior Sewing Machine & Supply LLC

PLEASE NOTE·

Different part ·m				ay be used dependin			o
*So please refer								n ~h~ machine.
page 44-4		a	~		the column of theg
46-71	.	5	n	0	confirm the		specific parts on
						correct part on pages

- 28 -

From the library of: Superior Sewing Machine & Supply LLC

FEED MECHANISM (1)

REF.	PART NO.	NAME				QT.	MEMO
NO.
1	210137	PUSH	BUTTON			1
2	210139	SPRING				1
3	204185	0 RING				1
4	210138	STOPPER				1
5	2193	SCREW				1
6	210136	RATCHET WHEEL COMPLETE				1
7	5461	SCREW	REGULATING		RATCHET	2
8	208411	FEED				1
9	208415	SPRING				2
10	211802	FEED REGULATING			ECCENTRIC	1
*11	211804	STOPPER				1
12	5437	SCREW			DRIVE	1
13	210140	CONNECTION/FEED				1
14	204084	NEEDLE BEARING				1
*15	210127	FEED ECCENTRIC				1
16	210129	GUIDE/FEED		ECCENTRIC		1
17	210130	SPRING				1
18	5427	SCREW				1
19	5292	SCREW				1
20	210282	LOOPER AVOID ECCENTRIC				1
21	5461	SCREW	ECCENTRIC RETAINER			2
22	210128	FEED				1
23	210141	CRANK/FEED		DRIVE		1
24	5457	SCREW			REGULATING	1
25	210161	LINK/DIFF. FEED				1
26	5316	SCREW				1
27	202522	RING	LEVER/DlFF. FEED REG.			1
28	210162	RIGHT				1
29	5457	SCREW			REGULATING	1
30	210163	SHAFT/DIFF. FEED				1
31	210164	BUSHING				1
32	204052A	OIL SEAL				1
33	204754	THRUST COLLAR				1
34	5084	SCREW				2
35	204756	SPRING/DIFF. FEED REG.				1
36	204757	LATCH	SCREW			1
37	210166	LEFT	LEVER/DIFF. FEED REG.			1
38	5117	SCREW	NUT			1
39	210167	THUMB				1
40	5486	SCREW				1
41	211301	SPRING WASHER				1
42	210168	DIFF. FEED		REG. GUIDE		1
43	210170	INDICATION		PLATE		1
44	5117	SCREW				1
45	210700	STOPPER				1
46	1732	SCREW				1
47	210171	STOPPER				1
48	2905	SCREW				1
49	201185	WASHER				1
50	201191	WASHER				1
51	211314	DIFF	FEED	REG. BASE		1
52	5118	SCREW			REGULATING	2
53	210535	BLOCK/DIFF. FEED				1
54	210172	DIFF	FEED	REGULATING BAR		1
55	210534	GUIDE/DIFF. FEED			REG. BAR	1
56	5091	SCREW				2
57	210533	SPRING				1
58	210532	THUMB	NUT			1
59	5292	SCREW				2
					- 29 -

From the library of: Superior Sewing Machine & Supply LLC