PEERLESS SLS 6½″ Subwoofer User Manual [ru]

Specs:

SLS
6½″ Subwoofer

Type Number: 830946
Features:

The SLS line combines high quality performance with an
affordable design. These transducers are ideal for use in systems
with high power handling requirements, and are logically
combined with the SDS line.
See architecture notes for SLS Platform

Go to Architecture Notes

Electrical Data

Nominal impedance
Minimum impedance
Maximum impedance
DC resistance
Voice coil inductance
Capacitor in series with x ohm

T-S Parameters

Resonance Frequency
Mechanical Q factor
Electrical Q factor
Total Q factor
Force factor
Mechanical resistance
Moving mass
Suspension complian ce
Effective cone diameter
Effective piston area
Equivalent volume
Sensitivity (2.83V/1m)
Ratio BL/√(Re)
Ratio fs/Qts

Power handling

Zn 4 ohm
Zmin 3.4 ohm
Zo 56.8 ohm
Re 2.8 ohm
Le 1.5 mH
Cc -- uF

fs 36.1 Hz
Qms 6.2
Qes 0.33
Qts 0.31
Bl 8.3 Tm
Rms 1.29 Kg/s
Mms 35.2 g
Cms 0.55 mm/N
D 12.8 cm
Sd 129 cm
Vas 12.7 ltrs

86.5 dB
5
F 117

2

100h RMS noise test (IEC)
Long-term Max Power (IEC 18.3)
Max linear SPL (rms) @ power
Short Term Max power (IEC 18.2)

Voice Coil and Magnet Parameters

Voice coil diameter
Voice coil height
Voice coil layers
Height of the gap
Linear excursion +/­Max mech. excursion +/­Flux density of gap
Total useful flux
Diameter of magnet
Height of magnet
Weight of magnet

Notes:
IEC specs refer to IEC 60268-5 third edition.
All Tymphany products are RoHS compliant.

150 W
50 W

-- dB/W

-- W

39 mm
24 mm
4
8 mm
8 mm

-- mm

-- mWb

1.3 mWb
115 mm
22 mm

0.84 Kg

Frequency: 830946

Mechanical Dimensions:830946

Drawing Dimensions

Outside Diameter
Flange Thickness
Magnet Diameter
Cutout Diameter
Interior Depth
Hole Diameter
Screw Circle Diameter

Tymphany™ and are trademarks of Tymphany Corporation. © 2009, Tymphany Corporation. All rights reserved. 012409