Specs:
SLS
10″ Subwoofer
Type Number: 830668
Features:
The SLS line combines high quality performance with an
affordable design. These transducers are ideal for use in systems
with high power handling requirements, and are logically
combined with the SDS line.
See architecture notes for SLS Platform
Driver Highlights: Coated paper cone, 39 mm voice coil, AL
shorting ring in magnet system.
Go to Application Notes.
Go to Architecture Notes
Electrical Data
Nominal impedance
Minimum impedance
Maximum impedance
DC resistance
Voice coil inductance
Capacitor in series with x ohm
T-S Parameters
Resonance Frequency
Mechanical Q factor
Electrical Q factor
Total Q factor
Force factor
Mechanical resistance
Moving mass
Suspension complian ce
Effective cone diameter
Effective piston area
Equivalent volume
Sensitivity (2.83V/1m)
Ratio BL/√(Re)
Ratio fs/Qts
Power handling
Zn 8 ohm
Zmin 6.3 ohm
Zo 53.2 ohm
Re 5.6 ohm
Le 3.3 mH
Cc -- uF
fs 33.3 Hz
Qms 4.85
Qes 0.57
Qts 0.51
Bl 10.2 Tm
Rms 2.2 Kg/s
Mms 51.1 g
Cms 0.45 mm/N
D 20.7 cm
Sd 335 cm
Vas 69.3 ltrs
88.7 dB
4.3
F 65
2
100h RMS noise test (IEC)
Long-term Max Power (IEC 18.3)
Max linear SPL (rms) @ power
Short Term Max power (IEC 18.2)
Voice Coil and Magnet Parameters
Voice coil diameter
Voice coil height
Voice coil layers
Height of the gap
Linear excursion +/Max mech. excursion +/Flux density of gap
Total useful flux
Diameter of magnet
Height of magnet
Weight of magnet
Notes:
IEC specs refer to IEC 60268-5 third edition.
All Tymphany products are RoHS compliant.
-- W
-- W
-- dB/W
-- W
39 mm
24 mm
4
8 mm
8 mm
-- mm
-- mWb
1.3 mWb
115 mm
22 mm
0.87 Kg
Frequency:
Mechanical Dimensions:
Tymphany™ and Peerless™ are trademarks of Tymphany Corporation. © 2008, Tymphany Corporation. All rights reserved. 060208
Loading...