Installation and Assembly:
Universal Tablet Mount
Models: PTM400, PTM400S
PTM400-W, PTM400S-W
Max Load Capacity:
5 lbs (2.2 kg)
Features:
• Adjustable height and width allows mount to fi t virtually any tablet
• Quick and easy installation onto desktop
• 30° of tilt and 360° of roll allows for a variety of positions in order to achieve the perfect viewing
angle
• Theft resistant security kit available
• Allows for cable management
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com
ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12
NOTE: Read entire instruction sheet before you start installation and assembly.
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions
and warnings contained in this Installation Sheet. If you have any questions regarding any of the
instructions or warnings, for US customers please call Peerless customer care at
1-800-865-2112, for all international customers, please contact your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience
with basic building construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and
all attached hardware and components.
• Never exceed the Maximum Load Capacity. See page one.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly
reducing their holding power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product
failure and personal injury.
Tools Needed for Assembly
• phillips screwdriver
Accessories
• ACC954 (security fasteners kit)
Table of Contents
Parts List................................................................................................................................................3
Cradle Assembly.................................................................................................................................4-5
Attaching Cradle Assembly to Mount.....................................................................................................6
2 of 8
ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12
Before you begin, make sure all parts shown are included with your product.
Parts List
Description Qty. Part # Part # Qty. Part # Part #
stand 1 021-P1050 021-2050 1 021-P1050 021-2050
B side clamp 2 021-P1052 021-2052 2 021-P1052 021-2052
C top clamp 1 021-P1054 021-2054 1 021-P1054 021-2054
D bottom clamp 1 021-P1069 021-2069 1 021-P1069 021-2069
plastic cover
E
washer
F
M5 x 8mm self tapping phillips screw
G
H 1/4" spacer 3 600-1215 600-1215 3 600-1215 600-1215
I adhesive foam pad 4 570-0045 570-0045 4 570-0045 570-0045
J M5 x 8mm socket pin screws - - - 4 520-1062 520-2038
security allen wrench - - - 1 560-9646 560-9646
K
Parts may appear slightly different than illustrated.
PTM400 PTM400-W PTM400S PTM400S-
590-1347 590-2347 2 590-1347 590-2347
2
540-2003 540-2003 7 540-2003 540-2003
7
520-1167 520-2167 7 520-1167 520-2167
11
C
A
B
FG
D
E
HIJ K
3 of 8
ISSUED: 11-15-11 SHEET #: 021-9014-2 10-15-12