Peerless-AV ACCXT301 Installation [en, es, fr]
Installation and Assembly:
Video Conferencing Shelf Accessory Kit
for Small Pivot and Articulating Mounts
Model: ACCXT301
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com
ISSUED: 07-28-11 SHEET #: 120-9121-2 09-15-11
NOTE: Read entire instruction sheet before you start installation and assembly.
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity. See page one.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal
injury.
Tools Needed for Assembly
• phillips screwdriver
• level
Before you begin, make sure all parts shown are included with your product.
Parts List
Description Qty.
A shelf 1 125-P1270
B left mount bracket 1 125-P1260
C right mount bracket 1 125-P1262
D adjustment bracket 2 125-P1269
E M5 x 16mm self tapping screw 6 520-9515
F washer 6 540-9400
Parts may appear slightly different than illustrated.
Part #
A
E F
C
DB
2 of 11
ISSUED: 07-28-11 SHEET #: 120-9121-2 09-15-11
Attach mount brackets (B, C) to display mount
using screws provided with your display mount.
1
NOTE: Display must be removed from display
mount prior to installing shelf. NOTE: See your
display mount instructions for details.
DISPLAY MOUNT
B
C
E
Attach adjustment brackets (D) to mount brackets
(B, C) using four screws (E) and four washers (F).
2
NOTE: Do not fully tighten screws (E) until step 4.
D
F
Attach shelf (A) to adjustment brackets (D) using
two screws (E) and two washers (F).
3
F
A
E
Adjust video display mount to desired height then
tight four screws (E).
4
E
3 of 11
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 07-28-11 SHEET #: 120-9121-2 09-15-11
© 2011, Peerless Industries, Inc. All rights reserved.
Instalación y montaje:
Videoconferencia Plataforma kit de accesorios
Pivote de la Pequeña y articulación de Montes
Modelos: ACCXT301
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com
PUBLICADO: 07-28-11 HOJA #: 120-9121-2 09-15-11
Loading...