Peavey Versarray 218 Sub Specifications
SPECIFICATIONS Versarray™ 218 Sub
Features:
• Dual Peavey exclusive Lo Max® 18" subwoofers
• 4800 watts of Program Power Rating
• Full power low frequency response down to
34 Hz!
• Patented UniVent™ vented cooling system
• Neutrik® Speakon® professional input
connectors, 4- and 8-pin
• Built-In tilt back casters with 4" wheels
• Pairs of heavy-duty steel handles inset on both
sides
• Acrylic Polyurethane Painted Finish, Black or
White
• Steel grille for speaker protection
• Made in the U.S.A.
Description
The Versarray 218 Sub incorporates the ultra-high power Lo Max 18" woofer
Versarray 218 shown with optional
Ground Stack Kit for mounting three
accompanying Versarray 112 module
loudspeakers (sold separately)
and a new cabinet and vent design. The Versarray 218 is a direct radiator vented
subwoofer designed specifically for the most demanding Pro-Audio applications.
The Versarray 218 Sub is compact for its power handling, SPL output, distortion
performance and bass extension. This is made possible by special characteristics
designed into the Lo Max woofer.
The Lo Max 18" driver is Peavey’s pinnacle of high-power subwoofer design. An incredible 4,800 watt program rating and extralong cone excursion add up to amazing levels of clean, deep bass from a pair of 18" woofers. Incorporating all of the features that
Peavey has engineered into their woofers over the years, including the field-replaceable basket, Kevlar®-impregnated cone for
increased strength and lower distortion due to greater dampening of excess cone vibrations, polyimide-impregnated fiberglass
former for higher sensitivity and extended frequency response, die-cast aluminum frame, and a 4-inch diameter edge-wound voice
coil with solderless diffusion welded OFHC copper leads.
This makes the Versarray 218 Sub a superior choice for the bass end of any high performance sound system, and it is primarily
designed for large professional touring and high performance permanent installs.
Extreme Bracing Cabinet Design
The Versarray 218 Sub cabinet is well braced and very stiff, as internal pressures produced by the Lo Max woofer can be very high.
The vent design integrated into the enclosure includes a middle brace to further increase enclosure stiffness. Each cabinet side
wall and vent wall are tied together at multiple points using multiple interlocking girdle braces, making these some of the sturdiest
subwoofer enclosures on the market. A knuckle-rap test will prove this immediately. The Versarray 218 Sub is constructed of
premium 13-ply Baltic birch plywood and is finished with a durable acrylic polyurethane paint, for a good cosmetic presentation. A
16-gauge powder-coated perforated metal grille covers the front of the system to protect the speakers from external damage. Tilt
back 4" wheel casters provide for ease of transport and set-up.
The Versarray 218 Sub incorporates Peavey’s patented UniVent, covered under US patent #6,549,637. The UniVent venting system
literally pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps keep
the woofer operating temperatures from getting so high, and increases reliability and reduces power compression under heavy
continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry
of total vent air flow. The UniVent design integrated into the enclosure includes a middle brace in each vent to further increase
enclosure stiffness. The large vent area and long path length allow for a large volume of air to move with very low resistance. This
is important due to the huge air flow volumes that the Lo Max woofer can produce.
Input connection to the system is made via two 4-pin Neutrik jacks in parallel, or an 8-pin Neutrik jack. A 4-pin Neutrik thru jack
is provided for satellite/top-box bi-amping flexibility while maintaining superior signal integrity. The inclusion of a standard 4-pin
Neutrik jack in parallel allows for daisy chaining to another cabinet. The system comes wired with both woofers in parallel, but
they can be accessed separately by removing the input cup and moving a jumper plug. The two woofers can be driven by separate
power amp channels through the Neutrik input jacks.
Despite its compact dimensions for a double 18" bass enclosure, this system generates extremely high sound pressure levels
(SPLs) and accepts up to 4,800 watts program of clean amplifier power, resulting in large area coverage with excellent punch and
high reliability.
SPECIFICATIONS Versarray™ 218 Sub
Frequency response, 1 meter on-axis,
swept-sine:
Anechoic environment:
46 Hz – 1.5 kHz (±3 dB)
Half-space environment:
41 Hz
Usable low frequency limit
(-10 dB point):
Anechoic environment: 34 Hz
Half-space environment: 31 Hz
Power handling:
Woofers paralleled
2,400 W continuous
4,800 W program
9,600 W Peak
Woofers driven separately, each
1,200 W continuous
2,400 W program
4,800 W Peak
Sound pressure level, 1 watt, 1 meter:
Woofers paralleled, 2.00 V input
Anechoic environment: 100 dB SPL,
Half-space environment: 106 dB SPL
Woofers driven separately, 2.83V input to
each
Anechoic environment: 103 dB SPL,
Half-space environment: 109 dB SPL
Maximum sound pressure level
(1 meter):
Anechoic environment:
134 dB SPL continuous
140 dB SPL peak
Half-space environment:
140 dB SPL continuous
146 dB SPL peak
Transducer complement:
2 x 18 in. vented
Lo Max® 18 woofer
Box tuning frequency:
36 Hz
Recommended active crossover
frequency region and slope:
120 Hz at 18 dB/octave minimum
Impedance (Z):
Woofers parallel:
Nominal: 4 Ω
Minimum: 3.3 Ω
Woofers separate access:
Nominal: 8 Ω x 2
Minimum: 6.6 Ω x 2
Input connections:
2 x 4-pin Neutrik® Speakon® inputs in
Parallel
1 x 8-pin Neutrik Speakon input
1 x 4-pin Neutrik Speakon thru
(for use with 8-pin Input)
Enclosure materials & finish:
18 mm 13-ply Baltic birch plywood
finished in acrylic polyurethane paint,
black or white
Mounting provisions:
This unit is not designed for over head
suspension.
Dimensions (H x W x D):
43.38 in. x 25.06 in. x 26.30 in.
1102 mm x 636 mm x 668 mm
Net weight:
204 lbs. (92.7 kg)
Companion Loudspeakers
(sold separately):
Versarray 112 line array module speaker
system
Optional Accessories:
Ground Stack Kit for mounting the
Versarray 112 line array module speaker
system
Frequency Response
This measurement is useful in
determining how accurately a given
unit reproduces an input signal. The
frequency response of the Versarray 218
Sub is measured at a distance of 1meter using a 1 watt (into the nominal
impedance) swept-sine input signal. As
shown in figure 1, the selected drivers in
the Versarray 218 Sub combine to give
a smooth frequency response on the
central axis from 46 Hz to 1.5 kHz.
Power Handling
There are many different approaches to
power handling ratings. Peavey rates this
loudspeaker system's power handling
using the AES Standard 2-1984. Using
audio band 40 Hz to 400 Hz pink noise
with peaks of four times the RMS level,
this strenuous test signal assures the
user that every portion of this system
can withstand today's high technology
music. This rating is contingent upon
having a minimum of 3 dB of amplifier
headroom available.
Harmonic Distortion
Second and third harmonic distortions
vs. frequency are plotted in figures 3
and 4 for two power levels. Ten percent
(10%) of rated input power and either
one percent (1%) of rated input power
or one watt, whichever is greater.
Distortion is read from the graph as
the difference between the fundamental
signal (frequency response) and the
desired harmonic. As an example, a
distortion curve that is down 40 dB from
the fundamental is equivalent to 1%
distortion.
Mounting
Caution: This unit is not designed
for overhead suspension!
Architectural and Engineering
Specifications
The loudspeaker system shall have an
operating bandwidth of 46 Hz to 1.5 kHz,
measured on axis at 1m in an anechoic
environment, with +/- 3 dB tolerance.
The nominal output level shall be 100
dB when measured at a distance of one
meter with an input of one watt. The
nominal impedance shall be 4 ohms
when both woofers are wired in parallel,
and two times 8 ohms when wired
for separate powering. The maximum
continuous power handling for a single
cabinet shall be 2,400 watts, maximum
program power of 2,400 watts and a
peak power input of at least 4,800 watts,
with a minimum amplifier headroom of
3 dB. The cabinet shall have two 4"
diameter fixed caster wheels on the
rear bottom corner for tilt back rolling
transport on flat level surfaces. The
outside dimensions shall be 43.38
inches high by 25.06 inches wide by
26.30 inches deep. The weight shall be
204 pounds. The loudspeaker system
shall be a Peavey model Versarray 218.
WARNING! The Versarray 218 Sub is
extremely efficient and handles a
lot of power! This sound system
can permanently damage hearing!
Use extreme care setting the overall
maximum loudness! Due to the clear, clean
sound output of the Versarray 218 Sub and
the lack of distortion or obvious distress,
the sound level seems much lower than it
actually is. This system is capable of SPL’s
in excess of 140 dB at 1 meter from the
speaker!
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the warranty
statement. Copies of this statement may be
obtained by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
2
SPECIFICATIONS Versarray™ 218 Sub
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
60
70
80
90
100
110
dB SPL (re 20 Pa)
Amplitude Response Anechoic vs 1/2 Space
1/2 Space
Anechoic
Subwoofer
Figure 1
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
60
70
80
90
100
110
120
130
dB SPL (re 20 Pa)
Harmonic Distortion : 10% Rated Power
Figure 4
3rd Harmonic
2nd Harmonic
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
50
60
70
80
90
100
110
120
dB SPL (re 20 Pa)
Harmonic Distortion : 1% Rated Power
Figure 3
3rd Harmonic
2nd Harmonic
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
1
2
3
5
10
20
30
50
100
Impedance
Z
( )
Figure 2
3
Loading...