Peavey STI User guide

Page 1
Peavey® STI - Stereo Transformer Direct Box
Logo referenced in Directive 2002/96/EC Annex IV
The bar is the symbol for marking of new waste and
13 August 2005
e STI is a compact stereo audio isolation unit that allows you to share signals, without hum or noise, to multiple outputs. With two isolation transformers, the STI provides a noise free un­colored stereo interface. It allows a computer or other device with a line or headphone output to connect to a mixer or amplier without hum.
• Dual isolation transformers
• 1/8” (3.5mm) stereo input
• XLR output level control
• Le and right 1/4” TRS line level outputs
• Ground li switch
USE: With transformer coupling, hum and noise due to dierent grounds are not passed through. Any device with a line or headphone output can be an isolated stereo source. e output con­nections will match the inputs of most receiving devices, mic or line level.
www.peavey.com
Warranty registration and information for U.S. customers available online at
Peavey Electronics Corporation 5022 Hartley Peavey Drive Meridian, MS 39305 (601) 483-5365 FAX (601) 486-1278
www.peavey.com/warranty
or use the QR tag below
Features and specications subject to change without notice.
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
is applied only to equipment manufactured after
www.peavey.com
Loading...