Peavey Pro 810 User Manual

FFrreeqquueennccyy rreessppoonnssee,, 11 mmeetteerr oonn-- aaxxiiss,, sswweepptt--ssiinnee iinn aann aanneecchhooiicc eennvviirroonnmmeenntt::

30 Hz to 15 kHz

PPoowweerr hhaannddlliinngg::

2,800 Watts program

SSoouunndd pprreessssuurree lleevveell,, 11 WWaatttt,, 11 mmeetteerr iinn aann aanneecchhooiicc eennvviirroonnmmeenntt::

112 dB

TTrraannssdduucceerr ccoommpplleemmeenntt::

8 x 10" high performance bass

guitar speakers

1 x 1" horn tweeter

CCrroossssoovveerr ffrreeqquueennccyy::

4,000 Hz

IImmppeeddaannccee::

Nominal: 4 Ohms Minimum: 3.2 Ohms

IInnppuutt ccoonnnneeccttiioonnss::

2 x 1/4" phone jacks 1 x four pin

Neutrik

Speakon

EEnncclloossuurree mmaatteerriiaallss aanndd ffiinniisshh::

1/2" plywood covered with a

durable black carpet

DDiimmeennssiioonnss ((HH xx WW xx DD))::

48.5" x 24.5" x 17" (1,231 mm x 622 mm x 431 mm)

NNeett wweeiigghhtt::

160 lbs

FFeeaattuurreess::

• Improved crossover for better mid-range tone

• Horn tweeter with level control

• Horn tweeter protection circuit

• Customized cast-frame bass speakers

DDeessccrriippttiioonn:: Peavey designed the Pro 810 as a full-range bass guitar enclosure with a special emphasis toward the professional musician. Years of research and development went into making this the industry’ best-sounding bass enclosure.

The Pro 810 is constructed using a special grade of 1/2" plywood and covered with a durable black carpet. It includes casters, high impact, corners and eight 10" woofers optimized for bass performance. A custom crossover is used to blend the high frequencies of the tweeter and features a level control that allows the performer to adjust

Listen To This

™

SPECIFICATIONS Pro 810

™

Listen To This

™

SPECIFICATIONS Pro 810

™

the high frequency output to accomodate any playing style. A protection circuit in the crossover helps prevent damage to the horn tweeter in the event of overpowering. Please note that this protection circuit is for long-term (average signal level) protection. It is still possible for transients (short-term peaks) to damage the horn.

The Pro 810 is a 4 Ohm enclosure capable of handling an input power of up to 2,800 Watts program.

PPoowweerr hhaannddlliinngg:: Peavey Electronics rates this unit’s system power handling using a modified form of the AES standard 2-1984, utilizing audio band limited (20 Hz to 20 kHz) pink noise with peaks over four times the RMS level. This strenuous test signal assures the users that every portion of this system can withstand today’s high technology music. The test signal contains large amounts of very low frequency energy, effectively simulating the frequency content of live music situations. The full measure of high frequencies in the

test signal allows for exposure of the speaker system to synthesized tones that may extend audibility. This rating is contingent upon having a minimum of 3 dB amplifier headroom available to ensure that clipping does not occur.

33 ++ 22 YYEEAARR LLIIMMIITTEEDD WWAARRRRAANNTTYY

NNOOTTEE::

For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi 39301-2898.

Features and specifications subject to change without notice.

80305055

Listen To This

™