Contents
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
INTRODUCTION
FEATURES
FRONT PANEL
REAR PANEL
CONNECTING
5.1 With the Peavey Tube
5.2
USINGTHECONTROLLERWITH
6.1
6.2
6.3
USING THE CONTROLLER AS ASTAND-ALONE MIDI CONTROLLER
MIDI
IMPLEMENTATION
...........................................................................................
..................................................................................................
DESCRIPTIONS
DESCRIPTIONS
THE
PFCTM
10
With Other
MIDI
Program Change Mode
Performance Tip/MIDI Mapping
Tuner Mode
.................................................................................
.........................................................................
...........................................................................
PROFESSIONAL MIDI
Fex'"
or
TransFexTM
Equipment
THETUBE
...........................................................
FEXORTRANSFEX212
FOOT CONTROLLER
212
.....................................
...................................................................
.......................................................
...........................
................................................................................
3
3
4
5
......................
6
6
6
..........................
6
6
7
7
8
8
Intended to alert the user to the presence of uninsulated
that may be of sufficient magnitude to constitute a risk of
A
Intended to alert the user of the presence of important operatmg and
hteraturc
A
CAUTION: RiTk ot electrical shock - DO NOT OPEN!
CAUTION: To reduce the risk of electric shock, do not remove cover No
qualified
WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or
appliance, read the operating guide for further warnings.
accompanying the product.
service personnel.
“dangerou\
electnc
voltage” within the product’s
shock to
pcr\oni.
mamtenance (servicing) in\tructlons
u\er servIceable
part\
in\idc. Refer \ervlcing
mol\ture.
Before
enclosure
in the
to
using thli
Peavey Electronics Corporation
1 .O INTRODUCTION
PFC'" 20
Professional
MIDI
Foot Controller
Congratulations on your purchase of the
controlleris designed to operate as either a stand-alone
conjunction with the Peavey Tube
Fex'"
or
PFCTM
10
TransFex'" 212
Professional
MIDI
MIDI
program change and continuous
as an intelligent program change and continuous
controller.
2.0 FEATURES
l 11
buttons
l
20-character
l
2 inputs for
l
Full
MIDI compatibility (5 pin or 8 pin)
l
"1ntelligent"operation
l
Chromatic tuner displayed on the foot controller's LCD
l
Phantom power is supplied to the PFC
8-pin
by
MIDI
2-line
LCD display
Control Voltage pedals
when used with the Peavey Tube
cable
Fex(version
10
from the Tube Fex or
Foot Controller. This
MIDI
controller,orin
1.2
and
higher)orTransFex212
TransFex 212
via the supplied
foot
Peavey Electronics Corporation
PFC” IO
Professional MIDI Foot Controller
I
Bank/Program Numbered Button
3.0 FRONT PANEL DESCRIPTIONS
Display
I
I
Program LED
Tuner LED
I I
B,mk/Tuner
Button
1.
Display
This is a
20-character
by
2-line
Liquid Crystal Display (LCD) with variable view angle adjustment for
easy visibility.
2.
3.
4. Bank/Program Numbered Buttons
5.
Tuner LED
Blinking red indicates that the tuner is active.
Bank/Tuner Button
Pressing the Bank/Tuner button once selects Bank mode. Then, pressing a "Numbered" button once
selects
thetuneris active. Once tuning has been completed, pressing any switch
a Bank.
Pressing the Bank/Tuner button twice selects Tuner
program.
The Bank/Program numbered buttons are used to select the bank and programs.
Program
LEDs
Indicates the active program.
mode.The
LED will begin blinking indicating that
will
return youtothe active
Peavey Electronics Corporation
PFC'"
10 Professional MIDI Foot Controller
View
Angle
Adjust
MIDI/
Remote Voltage
OutJcd
Control
Jarits
4.0 REAR PANEL DESCRIPTIONS
1.
Caution:
2.
3.
Power Supply
Required when using a
Use
onfy
the
16-16.5
Use
only
the optional16.5
be replaced, consultan Authorized Peavey Dealer or the factoryforthe correct replacement. Failure
to use the correctpowersupply
performance, and/or non-operation.
5-pin
MIDI
volt AC 1,000 mA adaptor, Peavey
volt
power supply for this product. If the (optional) power supply must
View Angle Adjustment
This adjusts the view
MIDI/Remote
Used when connecting to an effects unit. Use a standard
than
the Peavey Tube
MIDI cable
operation, and it
TransFex
212.
Out
provided.This
angle
of the LCD display to provide the most comfortable viewing
Jack
Fex
or
TransFex
willallow
will
connect the PFC 10 to the Phantom power supplied from the Tube Fex or
212. When using the Tube Fex or
you to
cablewith
could
resultin fire,shock hazard,extensive circuitdamage,decreased
MIDIequipment
part#70900660,
otherthan
theTube FexorTransFex
available as an option.
angle.
5-pin
MIDI cable with effects units
usethe PFClO ProfessionalMID
Foot
TransFex 212,
Controller’s
use the
"intelligent"
212.
other
8-pin
4.
Peavey Electronics Corporation
Control Voltage Jacks
The
CC6jacktransmits
transmit Controller 7 (volume) when used with a CV pedal or potentiometer.
Controller 6 when used with a CV
pedal
or potentiometer. Use the
CC7jackto
PFC‘"
10 Professional MIDI Foot Controller
5.0
CONNECTING THE PFC 10 PROFESSIONAL MIDI FOOT CONTROLLER
5. I WITH THE TUBE FEX OR TRANSFEX 212
When used with the Peavey Tube Fex or TransFex
supplied
as
Caution:
1,000 mA power supply must be used along with a
of the foot controller into the MIDI IN of the equipment being controlled.
8-pin
DIN cable. This cable provides power from the Tube Fex or TransFex 212 to the foot controller,
well
as supporting bidirectional
The
8-pin
cable
is
not
a standard MIDI
than
the Tube Fex or TransFex 212. At this time, no MIDI standard exists for the transmission of
bidirectional MIDI data and power in a single cable.
5.2 WITH OTHER
When used with
MIDI
MIDI
equipment
EQUIPMENT
MIDI
transmission.
other than
the Tube Fex or TransFex 212, an optional 16
212,
cable. It
standard
5-pin
the only connection required is that of the
should
DIN MIDI cable. Plug the MIDI/REMOTE OUT
not
be used with any equipment
6.0 USING THE CONTROLLER WITH THE TUBE FEX OR TRANSFEX 212
other
volt AC
The PFC 10 Professional MIDI Foot Controller senses when it is connected to a Peavey Tube Fex or
TransFex 212. When it is not, it operates in a "Stand-Alone" mode. If you are using the Controller with
equipment
USING THE CONTROLLER AS ASTAND-ALONE MIDI CONTROLLER.
for a short time:
controller is connected to a Tube Fex or TransFex
other than
the Tube Fex or TransFex 212, skip this section of the manual and go to section 7:
When you first turn the Tube Fex or TransFex 212 on, the Controller
At this time, it is waiting for the rack unit to identify
212,
you
will
not
itself
haveto
will
display the following message
and its
do anything, and this screen
MIDI
CHANNEL number. If the
will
clear itself when the rack unit responds. After a few seconds, the controller will be in Program mode.
6. I PROGRAM CHANGE MODE
In this
banks often programs. The ten NUMERIC buttons select the bank and the program within that bank. In this
manner, 100 programs can be selected: Banks 0 through 9 each have ten programs.
mode,thecontroller
will
transmit program
changecommands.The
programsarearrangedinten
Peavey Electronics Corporation
PFC’”
Forexample: If you are currently on program A4 and wish to change to program A58, press the Bank
button
58 is transmitted. Now, if you press 3, Program Change 53
once
and press the 5th numeric button to select bank 5. As soon as you press the 8, Program Change
will
be transmitted.
10 Professional MIDI Foot Controller
A typical display on the controller
In the top
number. This is followed by the name of the
the display is a letter followed by a
to the current PROGRAM number within the Tube Fex or
the effect chain currently being played.
left
corner of the display is
number.Thisisthe
will
appear as
a letter followed
PRESETthatis
currently being played. In the top right corner of
PRESET, either User(U) or Factory (F), that is mapped
TransFex
follows:
by a number. The number is the PROGRAM
212. The bottom line of the display reflects
6.2 PERFORMANCE TIP/MIDI MAPPING
The Tube Fex and
A good way to set up this Program Map is to arrange the presets in order of use. Read the Tube Fex or
TransFex 212
special presets to A2, A3, etc. These will correspond to number switches 0, 1, 2, and 3, respectively, for
Bank 0. If you will be using more than ten presets, map them to
Bank
etc., which
TransFex
throughoutthe gig. Furthermore, RAM CARTRIDGES can be programmed with more program banks.
owner's manual section about MIDI mapping.
For example:
1,
number switches 0, 1, 2, etc. You can
212 each have two (internal) banks of 128 programs
If you have favorite lead and rhythm presets, map them to
lets
you map your favorite presets to different banks along with special presets. The Tube Fex and
TransFex
212 are designed to easily allow any preset to be mapped to any program.
A0
and Al. Then map other
AlO,All,A12, etc.,which
also
map a preset to multiple locations, such as AO,
(A,B)
so these can be set up for different sets
will correspond to
AlO,
A20,
6.3 TUNER MODE
To enter Tuner mode at any time, press the Bank/Tuner button
displayed in the foot
The display on the right shows a notethatis, essentially, tuned. The display on the left shows a note
that is a
show the bar fartothe
Peavey Electronics Corporation
little
sharp and should be adjusted. Since the bar moves asittracksthe note, this display could
controller’s
Note is > 2 cents of being in tune. Note is I2 cents of being in tune.
left
with a cents
display:
value
ofCNTS:-35.This
twice.
A chromatic tuner
will
be
also
wouldindicatethatthe note was flat.
PFC'"
10
Professional MIDI Foot Controller
7.0 USING THE CONTROLLER AS A STAND-ALONE MIDI CONTROLLER
All
messages transmitted by the
When used with a standard,
5-pin
MIDI
PFClO
Professional MIDI Foot Controller are standard MIDI messages.
DIN
cable,
the
controller will
transmit Program and CV messages.
Each timeyouturnthe
will
transmit on. The
following message will
footcontrolleron,you
appear:
ENTER
CHFIblt4EL =
MIDI CH17tdtdEL:
??
need to
setthe
MIDI channelthatthefoot
controller
Select the appropriate channel by pressing the numeric buttons.
The PFC 10 Professional
Change mode. Programs are arranged in ten banks often programs as previously described.
For example:
Tuner button
Change 58istransmitted.
active program number and the display willshowthe
If you are currently on program 4 and wish to change to program 58, press the Bank/
once
and then press the 5th numeric button for Bank 5. As soon as you press the 8, Program
MIDI
Now,ifyou
STRND-FILONE
PROGRRM =
press 3, Program Change 53
Foot
53
Controller
MODE:
sends
MIDI
Program Change messages in the Program
will
betransmitted.The LEDs
currentbank/program,
as follows:
will show the
8.0 MIDI IMPLEMENTATION
or
TransFex
MIDI Channel:
212.
1-16
user
selectable
in STAND-ALONE
mode,automaticallysetwhen
used with Tube Fex
Peavey Electronics Corporation
PFC'"
10 Professional
MIDI
Foot Controller
For further information on other Peavey products, ask
your Authorized Peavey Dealer for the appropriate
Peavey catalog/publication.
Bass Guitars
Guitars
Bass Amplification
Guitar Amplification
Sound Reinforcement Enclosures
Microphones
Keyboards
DJ
Lighting
Mixers, Powered/Non-Powered
Accessories/Cables
Effects Processors
Axcess’”
The Peavey Beat’”
Monitor@ Magazine
Wear
Peavey Electronics Corporation
Key Issues’”
Low Down’”
PM’” Magazine
THIS LIMITED WARRANTY VALID ONLY WHEN PURCHASED AND REGISTERED IN THE UNITED STATES OR CANADA. ALL EXPORTED PRODUCTS
ARE SUBJECT TO WARRANTY AND SERVICES TO BE SPECIFIED AND PROVIDED BY THE AUTHORIZED DISTRIBUTOR FOR EACH COUNTRY.
Ces clauses de garantie ne sont vaiables qu’aux Etats-Unis et au Canada. Dans tour
fixees par le distributeur national et assuree par
lul
seion la legislation envigueur.
Produkte sind der Garantie und dem Service des lmporteurs des jewelligen Landes unterworfen.
product0
es
servicio que cada distribuidor autorizado determine y ofrezca en
comprado
en E.U. continentales o en Canada. Todos
10s productos
10s
diferentes paises.
les
autres pays,
l l
Diese Garantie ist nur in den USA and Kanada gultig. Alle Export-
que
Sean
comprados en el extranjero, estan sujetos a
les
clauses de garantie et de maintenance sont
l l
Esta garantia es valida solamente cuando
las
el
garantias y
PEAVEY ONE-YEAR LIMITED
WARRANTY/REMEDY
PEAVEY ELECTRONICS CORPORATION (“PEAVEY”) warrants this product, EXCEPT for covers, footswitches, patchcords, tubes and meters, to be free from
defects in material and workmanship for a period of one (1) year from date of purchase, PROVIDED, however, that this limited warranty is extended only to the
original retail purchaser and is subject to the conditions, exclusions, and
PEAVEY
90-DAY
limrtations
hereinafter set forth:
LIMITED WARRANTY ON TUBES AND METERS
If this product contains tubes or meters, Peavey warrants the tubes or meters contained in the product to be free from defects in material and workmanship for
a period of ninety (90) days from date of purchase; PROVIDED, however, that this limited warranty is extended only to the original retail purchaser and is also
subject to the conditions, exclusions, and limitations hereinafter set forth.
CONDITIONS, EXCLUSIONS, AND LIMITATIONS OF LIMITED WARRANTIES
These limited warranties shall be void and of no effect, if:
a.
The first purchase of the product is for the purpose of resale; or
b.
The onginal retail purchase is not made from an AUTHORIZED PEAVEY DEALER; or
c.
The product has been damaged by accident or unreasonable use, neglect, improper service or maintenance, or other causes not arising out of defects in
matenal or workmanship; or
d.
The serial number affixed to the product is altered, defaced, or removed.
In the event of a defect in matenal and/or workmanship covered by this limited warranty, Peavey will:
a.
In the case of tubes or meters, replace the defective component without charge.
b.
In other covered cases
(I.e.,
cases involving anything other than covers, footswitches, patchcords, tubes or meters),
repair
the defect in material or
workmanship or replace the product, at Peavey’s option; and provided, however, that, in any case, all costs of shipping, if necessary, are paid by you, the
purchaser.
THE WARRANTY REGISTRATION CARD SHOULD BE ACCURATELY COMPLETED AND MAILED TO AND RECEIVED BY PEAVEY WITHIN FOURTEEN (14)
DAYS FROM THE DATE OF YOUR PURCHASE.
In order to obtain service under these warranties, you must:
a.
Bring the defective item to any PEAVEY AUTHORIZED DEALER or AUTHORIZED PEAVEY SERVICE CENTER and present therewith the ORIGINAL
PROOF OF PURCHASE supplied to you by the AUTHORIZED PEAVEY DEALER in connection with your purchase from him of this product.
If the DEALER or SERVICE CENTER is unable to provide the necessary warranty service you will be directed to the nearest other PEAVEY AUTHORIZED
DEALER or AUTHORIZED PEAVEY SERVICE CENTER which can provide such service.
OR
b.
Ship the defective item, prepaid, to:
PEAVEY ELECTRONICS CORPORATION
International Service Center
326 Hwy. 11 & 80 East
Meridian, MS 39301
including therewith a complete, detailed description of the problem, together with a legible copy of the original PROOF OF PURCHASE and a complete return
address. Upon Peavey’s receipt of these Items:
have been complied with, Peavey will provide the necessary warranty service to repair or replace the product and will return it, FREIGHT COLLECT, to you,
If the defect is remedial under these limited warranties and the other terms and conditions expressed herein
the purchaser.
Peavey’s liability to the purchaser for damages from any cause whatsoever and regardless of the form of action, including negligence,
damages up to the greater of $500.00 or an amount equal to the purchase price of the product that caused the damage or that
to the cause of action. Such purchase price will be that in effect for the specific product when the cause of action arose. This limitation of liability will not apply to
claims
for personal injury or damage to real property or tangible personal property allegedly caused by Peavey’s negligence. Peavey does not assume liability for
IS
the subject of or is directly related
personal injury or property damage arising out of or caused by a non-Peavey alteration or attachment, nor does Peavey assume any
IS
lrmrted
responsibility
to the actual
for damage to
interconnected non-Peavey equipment that may result from the normal functioning and maintenance of the Peavey equipment.
UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, ANY INCIDENTAL DAMAGES, OR ANY
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
THESE LIMITED WARRANTIES ARE IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE; PROVIDED, HOWEVER, THAT IF THE OTHER TERMS AND
CONDITIONS NECESSARY TO THE EXISTENCE OF THE EXPRESSED,
LlMlTEu
WARRANTIES, AS HEREINABOVE STATED, HAVE BEEN COMPLIED
WITH, IMPLIED WARRANTIES ARE NOT DISCLAIMED DURING THE APPLICABLE ONE-YEAR OR NINETY-DAY PERIOD FROM DATE OF PURCHASE OF
THIS PRODUCT.
SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THESE LIMITED WARRANTIES GIVE YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
THESE LIMITED WARRANTIES ARE THE ONLY EXPRESSED WARRANTIES ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION,
WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY.
In the event of any modification or disclaimer of expressed or implied warranties, or any limitation of remedies, contained herein conflicts with applicable law,
then such modification, disclaimer or limltation, as the case may be, shall be deemed to be modified to the extent necessary to comply
Your remedies for breach of these warranties are limited to those remedies provided herein and Peavey Electronics Corporation gives
with
such law.
thus
limited warranty only
with respect to equipment purchased in the United States of America.
INSTRUCTIONS -WARRANTY REGISTRATION CARD
1.
Mail the completed WARRANTY REGISTRATION CARD to:
PEAVEY ELECTRONICS CORPORATION
P.O. BOX 2898
Meridian, MS 39302-2898
a. Keep the PROOF OF PURCHASE. In the event warranty service is required during the warranty period, you will need this document. There will be no
identification card issued by Peavey Electronics Corporation.
2.
IMPORTANCE OF WARRANTY REGISTRATION CARDS AND NOTIFICATION OF CHANGES OF ADDRESSES:
a. Completion and mailing of WARRANTY REGISTRATION CARDS - Should notification become necessary for any condition that may require correction,
the REGISTRATION CARD will help ensure that you are contacted and properly notified
b.
Notice of address changes - If you move from the address shown on the WARRANTY REGISTRATION CARD, you should notify Peavey of the change of
address so as to facilitate your receipt of any bulletins or other forms of notification which may become necessary in connection
with
any condition that may
require dissemination of information or correction.
3.
You may contact Peavey directly by
telephonrng
(601) 483-5365.
10
Peavey Electronics Corporation
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electric products, basic cautions should always be followed, including the following:
1.
Read all safety and operating instructions before using this product.
2.
All safety and operating instructions should be retained for future reference.
3.
Obey all cautions in the operating instructions and on the back of the unit.
4.
All operating instructions should be followed.
5.
This product should not be used near water, i.e., a bathtub, sink, swimming pool, wet basement, etc.
6.
This product should be located so that its position does not interfere with its proper ventilation. It should not be placed flat against a
wall or placed in a built-in enclosure that will impede the flow of cooling air.
7.
This product should not be placed near a source of heat such as a stove, radiator, or another heat producing amplifier.
8.
Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.
9.
Never break off the ground pin on the power supply cord. For more information on grounding, write for our free booklet “Shock
Hazard and Grounding.”
10.
Power supply cords should always be handled carefully. Never walk or place equipment on power supply cords. Periodically check
cords for cuts or signs of stress, especially at the plug and the point where the cord exits the unit.
11.
The power supply cord should be unplugged when the unit is to be unused for long periods of time.
12.
If this product is to be mounted in an equipment rack, rear support should be provided.
13.
Metal parts can be cleaned with a damp rag. The vinyl covering used on some units can be cleaned with a damp rag or an ammonia-
based household cleaner if necessary. Disconnect unit from power supply before cleaning.
14.
Care should be taken so that objects do not fall and liquids are not spilled into the unit through the ventilation holes or any other
openings.
15.
This unit should be checked by a qualified service technician if:
a.
The power supply cord or plug has been damaged.
b.
Anything has fallen or been spilled into the unit.
C.
The unit does not operate correctly.
d.
The unit has been dropped or the enclosure damaged.
16.
The user should not attempt to service this equipment. All service work should be done by a qualified service technician.
17.
This product should be used only with a cart or stand that is recommended by Peavey Electronics.
18.
Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise
induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time.
The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level
exposures.
Duration Per Day In Hours
Sound Level
8
6
4
3
2
1 l/2
1
l/2
l/4
or less
According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss.
Ear plugs or protectors in the ear canals or over the ears must be worn when operating this amplification system in order to prevent a
permanent hearing loss if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high
sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as
this amplification system be protected by hearing protectors while this unit is in operation.
dBA,
Slow Response
90
92
95
97
100
102
105
110
115
Peavey Electronics Corporation
SAVE THESE INSTRUCTIONS!
11
01996
Features and specifications subject to change without notice.
Peavey Electronics Corporation
A
711 A Street / Meridian, MS 39301 / U.S.A. / (601) 483-5365 / Fax 486-1278
#80300362
Printed in U.S.A.
5/96
Loading...