Peavey IPR2 5000 Datasheet

IPR2™ 5000

OVERVIEW

IPR2™ power amplifiers, designed for years of reliable, flawless operation under rigorous use. The
groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce
weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed
with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio
resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed
reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology
and extensive protection circuitry allow operation with greater efficiency into difficult loads and power
conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as
low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload
conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and

does not require massive heat sinks to cool.

FEATURES

- 2900W RMS x 1 at 2 ohms

- 1780W RMS x 1 at 4 ohms

- 975W RMS x 1 at 8 ohms

- 2525W RMS x 2 at 2 ohms

- 1510W RMS x 2 at 4 ohms

- 890W RMS x 2 at 8 ohms

- 2 channel independent, fourth-order Linkwitz-Riley crossovers

- DDT protection

- Revolutionary IPR class D topology

- Detented input controls

- Combination XLR 1/4" inputs

- 4 pole twist lock output connectors

- Ultra-light weight

- Individual signal pass 1/4" jacks on each channel

- LED illuminated

- Standby, LED power present indication

- Weight Unpacked: 13.67 lb(6.2 kg)

- Weight Packed: 17.42 lb(7.9 kg)

- Width Packed: 21"(53.34 cm)

- Height Packed: 21.2"(53.848 cm)

- Depth Packed: 6"(15.24 cm)