P-DUKE FEC30-24S12W, FEC30-24S05W, FEC30-48S3P3W, FEC30-48S2P5W, FEC30-48S1P8W Datasheet

...

• 1.8V, 2.5V , 3.3V, 5V, 12V, 15VDC OUTPUT

• OUTPUT CURRENT UP TO 8A

• 30 WATTS MAXIMUM OUTPUT POWER

• 4:1 WIDE INPUT VOLTAGE RANGE

• SAFETY APPROVAL PENDING

TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

UL E193009 TUV R50018459 CB JPTUV-005033 CE MARK

The FEC30-W series offer 30 watts of output power from a 2 x 1.6 x 0.4 inch package .The FEC30-W series with 4:1 wide input voltage of 10-40VDC and 18-75VDC and features 1600VDC of isolation, short-circuit and over-voltage protec ti on, as well as six sided shielding. The safety designed meet to EN60950 and UL60950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications.

• SIX-SIDED CONTINUOUS SHIELD

• HIGH EFFICIENCY UP TO 88%

• STANDARD 2” x 1.6” x 0.4” PACKAGE

• FIXED SWITCHING FREQUENCY

OUTPUT SPECIFICATIONS

Output power 30 Watts max Voltage accuracy Full load and nominal Vin ± 1% Voltage adjustability Minimum load Line regulation LL to HL at Full Load Load regulation 10% to 100% FL

Ripple and noise Temperature coefficient

Transient response recovery time 25% load step change 300uS

Over voltage protection Zener diode clamp

Over load protection % of FL at nominal input 150% typ Short circuit protection Hiccup, automatics recovery

20MHz bandwidth (Measured with a 104pF/50V MLCC)

1.8V output

2.5V output

3.3V output 5V output 12V output 15V output

0.02% / ºC, max

± 10%

± 0.5% ± 0.5%

75mVp-p

3.9V

6.2V

INPUT SPECIFICATIONS

Input voltage range

Under voltage lockout Input filter (Note 1) L-C type

Input voltage variation dv/dt Input surge voltage

100mS max Input reflected ripple (Note 2) Nominal Vin and full load 20mAp-p

Start up time Nominal Vin and constant resistor load 10mS Remote ON/OFF (Note 3)

(Positive logic) Remote off input current

24V nominal input 48V nominal input 24V input

48V input

(Complies with ETS300 132 part4.4) 24V input 48V input

DC-DC ON DC-DC OFF Nominal Vin

DC-DC ON DC-DC OFF DC-DC ON DC-DC OFF

Open or 3.5V < Vr < 12V

Short or 0V < Vr < 1.2V

10 – 40VDC 18 – 75VDC

10VDC

8VDC 18VDC 16VDC

5V/ms,max

50VDC

100VDC

3mA

GENERAL SPECIFICATIO NS

Efficiency See table Isolation voltage 1600VDC, min Isolation resistance

Isolation capacitance 1000pF, max Switching frequency 300KHz, typ

pprovals and standard IEC60950, UL60950, EN60950

Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epox y (UL94-V0)

Dimensions Weight 48g (1.69oz)

MTBF (Note 4) 1.315 x 106 hrs

15V 18V

ENVIRONMENTAL SPECIFICATIONS

Operating temperature range -40ºC ~ +85ºC (with derating) Maximum case temperature 100ºC Over temperature protection 115ºC, t yp Storage temperature range -55ºC ~ +105ºC

Thermal impedance (Note 5) Thermal shock MIL-STD-810D

Vibration 10~55Hz, 2G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH

Nature convection Nature convection with heat-sink

2.00 X 1.60 X 0.40 Inch (50.8 X 40.6 X 10.2 mm)

EMC CHARACTERISTICS

Conducted emissions EN55022 Level A Radiated emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria2 Radiated immunity EN61000-4-3 Perf. Criteria2 Fast transient EN61000-4-4 Perf. Crit eri a2 Surge EN61000-4-5 Perf. Criteria2 Conducted immunity EN61000-4-6 Perf. Criteria2

109ohms, min

10ºC/Watt

8.24ºC/Watt

(7)

(8)

Bott

Model

Number

FEC30-24S1P8W 10 – 40 VDC 1.8 VDC 8000mA 789mA 80 65000uF FEC30-24S2P5W 10 – 40 VDC 2.5 VDC 8000mA 1029mA 85 33000uF FEC30-24S3P3W 10 – 40 VDC 3.3 VDC 6000mA 994mA 87 19500uF

FEC30-24S05W 10 – 40 VDC 5 VDC 6000mA 1506mA 87 10200uF FEC30-24S12W 10 – 40 VDC 12 VDC 2500mA 1506mA 87 3300uF

FEC30-24S15W 10 – 40 VDC 15 VDC 2000mA 1488mA 88 1100uF FEC30-48S1P8W 18 – 75 VDC 1.8 VDC 8000mA 390mA 81 65000uF FEC30-48S2P5W 18 – 75 VDC 2.5 VDC 8000mA 508mA 86 33000uF FEC30-48S3P3W 18 – 75 VDC 3.3 VDC 6000mA 497mA 87 19500uF

FEC30-48S05W 18 – 75 VDC 5 VDC 6000mA 744mA 88 10200uF

FEC30-48S12W 18 – 75 VDC 12 VDC 2500mA 753mA 87 3300uF

FEC30-48S15W 18 – 75 VDC 15 VDC 2000mA 744mA 88 1100uF

Input

Range

Output

Voltage

Output

Current

Input

Current

Eff

(6)

(%)

Capacitor

Load max

Note

1. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models. Power mate suggest: Nippon chemi-con KMF series, 220F/100V, ESR 90m.

2. Simulated source impedance of 12uH. 12uH inductor in series with +Vin.

3. The ON/OFF control function. There are positive logic (standard) and negative logic (option). The pin voltage is referenced to negative input

T o order negative logic ON/OFF control add the suffix -N (Ex: FEC30-24S05W-N.

4. BELLCORE TR-NWT-000332. Case I: 50% Stress, T e mperature at 40ºC. (Ground fixed and controlled environment).

5. Heat sink is optional and P/N: 7G-0011A.

6. Maximum value at nominal input voltage and full l oad.

7. Typical value at nominal input voltage and full load.

8. Test by minimum Vin and constant resistor load.

2.00 (50.8)

1.60 (40.6)

0.70 (17.8) 0.60 (15.2)

0.20 (5.1)

1 2 4

View

5 876

0.40 (10.2)

1.80 (45.7)

FEC30-24S3P3W Derating Curve without Heat-Sink

100

Nature convection

OUTPUT POWER (%)

AMBIENT TEM PERATUR E (º C )

FEC30-24S3P3W (Note 5) Derating Curve with Heat-Sink

100

Nature convection

OUTPUT POWER (%)

AMBIENT TEM PERATUR E (º C )

50 60 70 80 90

FEC30-24S3P3W Efficiency VS Input voltage

88 87 86 85 84 83 82 81

EFFICIENCY (%)

80 79 78

100 -40 -25 0 -10

10 2015

INPUT VOLTAGE (V)

FEC30-24S3P3W Efficiency VS Output load

87 86 85 84 83 82 81 80

EFFICIENCY (%)

75 70 65

OUTPUT LOAD (A)

25 30 35 40

3 4 5

6 1 2

0.40 (10.2)

0.70 (17.8)

1. All dimensions in Inches (mm)

2. Pin pitch tolerance 0.014(0.35)

EXTERN AL OUTPUT TRIMMING

Output can be externally trimmed by using the method shown below.

0.40 (10.2)

0.50 (12.7)

PIN CONNECTION

PIN DEFINE

1 + INPUT 2 - INPUT 4 CTRL 5 NO PIN 6 + OUTPUT 7 - OUTPUT 8 TRIM

TRIM UP

TRIM DOWN

0.22 (5.6)