PCE Instruments PCE-895 Users guide

Ref.No.：062017

○

○

○

○

Press Mode key (

), then press Up key (

) or Down key (

) to set the emissivity, then press Mode key (

) to confirm it.

The emissivity can be changed from 0.10 (10E) to 1 (100E).

Average (AVG)

Connect the thermocouple with Thermocouple socket (

) and put the probe in/on the target, the thermometer will display the

After measure high temp, the probe may remain HOT for a while.

After taking the temperature, press Mode key (

) for the Memory (M00), then press Meas. key (

) to save the measurement.

Press Up key (

) for LOCK mode ON/OFF. The lock mode is particularly useful for continuous monitoring of

temperatures for up to 60 minutes.

Hold on

○

color when the reading is close to maximum value, and

. While the temperature is

○

Manual

The thermometer

on. If the error message remains please contact the Service Department for further assistance.

are possible

replaced, measurements are still possible

possible

Measurement Range

-35 to +1600 oC (-31 to +2912 oF)

-64 to +1400°C (-83.2 to +2552°F)

Operating Range

0 to +50°C (32 to +122°F)

Tobj=0~1600: ±2% of reading or 2°C (4°F) whichever is greater

is

Emissivity Range

0.95 default – adjustable 0.1 to 1 step .01

Resolution

0.1°C/0.1°F at -83.2 to 999.9(°C/°F), otherwise 1°C/1°F

Spectral Range

8~14μm

Distance:Spot

60:1 (90% energy covered)

Internal Memory

Detailed 24 Memories with Temperature & Emissivity

USB Function

Please download the program from CD. (CD & USB cable are enclosed with the package)

Output Interface

SPI, USB, SD card

Battery Life

Typical 14, min 10 hours continuous use (Alkaline, with laser and backlight)

Dimensions

202.99*176.07*58.31 mm (7.99×6.93×2.30 inch)

Weight

401 grams (14.14 oz) including batteries (AA*2pcs)

Note: Under the electromagnetic field of 3V/m from180 to600 MHz, the maximum error is 10 oC (18 oF).

targeting.

Temperature Meter

PCE-895

PCE-895 Thermometer Operating Instructions

For Model with thermocouple socket

The PCE-895 thermometer is a non-contact infrared thermometer. There are many mathematical modes for the Infrared function. Please remember
to keep away from children and don’t use it for safety related applications.

STORAGE & CLEANING

PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: [phone]
Fax: [phone]
[e-mail]

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Southpoint Business Park

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: [phone]

Fax: [phone]

[e-mail]

It should be stored at room temperature. The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all times,
care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol, allowing the lens to fully dry
before using the thermometer. Do not submerge any part of the thermometer.

LCD ERROR MESSAGES

The thermometer incorporates visual diagnostic messages as follows:

Units 12/13

Ensign way

*Dual laser points
specify the

(Default Screen)

approximate
measurement
area for better

Simply aim the thermometer at the measure target with Lens (

7

) and press Meas. key (

6

) to display the surface temperature. The

Distance:Spot is 60:1. Please make sure the target area is within the field of view.

11

** Data logger function(SD Card、USB): Please push “Micro SD Card Switch”

2

FUNCTION Press Mode key (

) for scrolling more display function as follows.

up to enable the function..

Here will show the emissivity data. (The default emissivity is 0.95.)

○

2

○

4

○

3

○

2

Press Mode key (○2) for the Maximum (MAX), Minimum (MIN), Different between MAX and MIN (DIF) and

modes. During the measurement, the special modes reading will be displayed beside the mode icon.

Press Up key (○4) or Down key (○3) to change the High Alarm (HAL) or Lo Alarm (LAL), then press Meas. key (○6) to confirm

it. For example: When the reading 26.9

temperature automatically without pressing any button. To see the minimum or maximum data during the probe measurement,
please hold down the Up key (

Under the Memory (M00), press Up key (○4) or Down key (○3) key to display the record.

** The thermometer will automatically shut off if left idle for more than 60sec., unless in PRB mode. (In PRB mode, it will shut off if left idle for
more than 12 minutes.)

ADD VALUE

In E, MAX, MIN, DIF, AVG
mode:

Press Down key (○3) for oC or oF transferred.

○

o

C < LAL 27 oC, the Low icon will flash and you will hear a beep sound.

○4) or Down key (○3).

2

○

4

○

5

6

○

‘Hi’ or ’Lo’ is displayed when the temperature being measured is outside of the settings of HAL and LAL.

「

」 「 」

‘Er2’ is displayed when the thermometer is exposed to rapid changes in the ambient temperature. ‘Er3’
is displayed when the ambient temperature exceeds 0

o

C (32°F) or +50oC (122°F).
should be allowed plenty of time (minimum 30 minutes) to stabilize to the working/room temperature.
Error 5~9, for all other error messages it is necessary to reset the thermometer. To reset it, turn the

「 」

「 」「 」

instrument off, remove the battery and wait for a minimum of one minute, reinsert the battery and turn

‘Hi’ or ’Lo’ is displayed when the temperature being measured is outside of the measurement range.

BATTERIES
The thermometer incorporates visual low battery indication as follows:

‘Battery OK’: measurements

‘Battery Low’: battery needs to be

‘Battery Exhausted’: measurements are not

When the ‘Low Battery’ icon indicates the battery is low, the battery should be replaced immediately with AA, 1.5V batteries. Please note: It is

important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction.

Dispose of used battery promptly and keep away from children.

SPECIFICATION PCE-895

Item Non-contact Infrared Scan function

Accuracy(Tamb=23±3°C)

Tobj=-35~0: ±(2°C+0.05/degC)°C,

Thermocouple Probe Scan function
(K type; probe not included.)

±1% of reading or 1°C (1.8°F) whichever
greater (Test under Tamb=23±6°C)

Response Time (90%) 1sec

External Memory Type

Support 8G micro SD card (Recommend to use the attached SD card).
If SD card data logger is failed, please reset the switch○

11

In MAX, MIN mode:
the Meas. key (

6

)

In all modes: First hold on
the Meas. key (

6

)

shows BLUE when close to minimum
between the maximum and minimum, the bar will display in YELLOW.

LCD Backlight: always on.
and press Down key (○3) for laser function ON/OFF.

CAUTION

1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE LASER BEAM–PERMANENT EYE DAMAGE MAY RESULT.

ows RED

2. USE EXTREME CAUTION WHEN OPERATING THE LASER.

3. NEVER POINT THE DEVICE TOWARDS ANYONE’S EYES.

4. KEEP OUT OF REACH OF ALL CHILDREN.

Caution: The measure range is for thermometer only. User should choose proper probe types for different kinds of application.

Please make sure the target to be measured will not exceed the temperature range of the probe to avoid permanent damage of
the thermocouple probe.

Caution: To avoid electric shock and thermometer damage, do not measure live circuit where voltage exceeding 24V AC RMS or

60V DC with the thermocouple probe.

EMC/RFI: Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of

approximately 3 volts per meter, but the performance of the instrument will not be permanently affected.