Paxton TOUCHLOCK K series stainless steel compact keypad User Manual

14/09/2011

Ins-30058
TOUCHLOCK K series stainless steel compact keypad

Paxton

Technical Support

01273 811011 [e-mail]

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Quickstart guide

This supplement is a brief guide to installing a TOUCHLOCK K series compact system. Further information is
available for download at: http://paxton.info/140 or call the communications team on: 01273 811011.

Fitting

Keypad bezels

Additional bezels are available in black, white, grey, blue and silver. Registered installers can order these free
of charge by logging onto the secure installer extranet: http://paxton.info/1035 or if you are not a registered
installer please call us on: 01273 811011 for more information.

The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596

Wiring

Bell

(push to make)

Electric release

Exit button

+12V

Exit

0V

0V

+12V

0V

12V DC power

supply

+12V

0V

12V DC release current rating must be less than 1A.

Wire outputs

If the +12V bell wire (Brown) is not connected

it must be terminated to avoid a short circuit.

Full System Reset

1. Power down the system.

2. Power the system up whilst pressing and holding 3.

3. The LED's will ash and the unit will beep 3 times a second.

4. Go to the programming guide. - Initialising a new system.

+12V DC

0V

Lock 12V

Lock 0V

Exit input

Exit 0V

Bell 12V

Bell 0V

K75 Screw connector option

The unit should be mounted in conjunction with
an electrical backbox to achieve the required
clearance for the connector.

If an adaptor plate (310-750) is tted, the

mountings on the backbox can also be used.