14/09/2011
Ins-30013 TOUCHLOCK K series compact keypad
Technical Support
Paxton
Fitting
01273 811011
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
support@paxton.co.uk
Keypad bezels
Additional bezels are available in black, white, grey, blue and silver. Registered installers can order these free
of charge by logging onto the secure installer extranet: http://paxton.info/1035 or if you are not a registered
installer please call us on: 01273 811011 for more information.
The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596
Wiring
Exit button
(push to make)
+12V
Exit
0V
Bell
+12V
0V
12V DC power
supply
+12V
0V
Electric release
Wire outputs
1
2 3
4 5 6
7 8 9
0 #
*
0V
12V DC release current rating must be less than 1A.
K75 Screw connector option
+12V DC
0V
Lock 12V
Lock 0V
Exit input
Exit 0V
Bell 12V
Bell 0V
The unit should be mounted in conjunction with
an electrical backbox to achieve the required
clearance for the connector.
Full System Reset
1. Power down the system.
2. Power the system up whilst pressing and holding 3.
3. The LED's will ash and the unit will beep 3 times a second.
4. Go to the programming guide. - Initialising a new system.
If an adaptor plate (310-750) is tted, the
mountings on the backbox can also be used.
Initialising a new system
The rst time the system is powered up the control unit will beep 3 times a second.
Choose a 6 digit Programming Code and load this into the unit as follows:
DO NOT USE 123456 - The default User Code (1234) will open the
door before the Programming Code had been fully entered.
6 digit Programming
You can now set up the user codes and features using the programming chart.
Example: - Setting a user code to unlock the door under Normal conditions.
Enter 6 digit
Programming
Code
Hold for 3 secs
The unit will beep and the LED ashes faster
This box can be used to write down the Programming Code for future reference.
Code
The default user code is now set to 1234
8
Ensure that this information is stored in a secure place.
Enter user code
4-8 digits
6 digit Programming
Code
Re-enter
user code
4
Normal
START - Enter the 6 digit Programming Code and hold down a function key
for 3 seconds. - The unit beeps and the LED ashes faster.
Continue the key sequence to set the option - The keypad returns to operating mode.
Set a
user code
Door open time
(seconds)
Single or multiple
codes
Lock wire setting
Silent operation
20 wrong keystrokes
= 60 second lockout
Exit button
8
Enter user code
4-8 digits
5
2
1
3
4
7
Re-enter
user code
X
Enter time in seconds
(default = 07, max = 60)
2
2
2
2
2
X
One code only
Fail locked
Beep on
OFF
Open door for
time in option 5
OR
OR
OR
OR
OR
OR
OR
OR
6
6
6
6
6
= Normal
4
= Toggle
6
= Duress
8
= Delete
2
Multiple codes allowed
Fail open
Silent
ON
Toggle door open
until pressed again or
toggle code entered
Change
Programming Code
Data Reset (except
Programming code)
6
9
Enter 6 digit
Programming Code
Enter 6 digit
Programming Code
9
Re-enter 6 digit
Programming Code
Function keys
= Hold down for 3 secs
Technical Help
Here is the list of topics about this product that receive the most technical support enquiries.
We list them here to help you speed up the installation and trouble shooting process.
1 - Can I use a fail open release (e.g. Maglock)?
QThe lock wires from a compact keypad provide 12V DC to the electric lock. By default, the compact is set to operate with a fail
Qlocked release - providing 12V on the lock wires when a valid entry is made. To use a fail open release, the lock wire setting
Qneeds to be changed (Program option 1)
2 - Can I put a relay across the lock wire output?
QYes - All compact systems have been designed to drive relays.
3 - Integration with an entry phone system.
QThe output from the entry phone system is used to simulate an exit button for the Paxton equipment. No voltage should be
Qapplied to the exit input wires (Blue / Mauve) of a compact unit. Most phone systems will provide a powered pair to release the
Qdoor lock; this voltage must be used to drive an independent relay. The relay contacts must be 'normally open going closed' to
Qmimic a 'push to make' exit button. Only a voltage free output pair can be connected directly to the exit input wires.
4 - What are the keypad code types used for?
QNormal - Releases the door for the time period set in Option 5.
QToggle - Releases the lock until the code is entered for a second time.
QDuress - Releases the lock (as in Normal) but also energizes the bell output for 30 seconds.
QDelete - Used to remove a speci c code that has already been entered in Multiple mode.
5 - Connecting a compact with another control unit.
QThis cannot be done. Paxton Compact systems have the control electronics built in and no direct data output is provided.
QThe Switch2 and Net2 system use a different type of data input.
QNote: The compact system will control the door unit on its own.
6- Read in and read out on one door.
QYou cannot wire two compact systems in parallel to a common lock as this may result in damage to your system. They will both
Qpower the door lock independently and will not offer single point control. We recommend using one Switch2 controller with two
Qcompatible keypads or readers.
7 - Use with External doors.
QCompact system are less secure than a system with a separate controller. It is strongly recommended that a Switch2 based
Qsystem is used in place of a compact as the control electronics are secure on the inside of the property.
Specications
Features
Number of Codes
Code length
Door open time
Silent operation
Can be used with fail OPEN locks
Can be used with fail CLOSED locks
Exit button input
Door Contact input
Backlight
Electrical
Voltage
Current
Switchable current
Alarm/bell output voltage
Cable length
Environment
Operating temperature
Waterproof
Vandal resistance
Dimensions
K38 38 mm 78 mm
K50 50 mm 100 mm
K75 75 mm 143 mm
Min
1 50
4 digits 8 digits
1 sec 60 secs
Min
11V DC 14V DC
Min
-20 °C +55 °C
IPX7
Width
Max
Max
170 mA
1 A
12V DC
Max
Height
Yes
Yes
Yes
Yes
No
Yes
3 metres
Outdoor Use
Low
Depth
12.5 mm
15 mm
16 mm
Loading...