Paxton PROXIMITY Mullion reader User Manual

25/10/2010

Ins-30149 PROXIMITY Mullion reader

Technical Support

01273 811011

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Suitability

Security-sensitive doors

Wet environments

Fitting

[e-mail]

Mounted on metal surface

Readers mounted together

Paxton

300 mm

between

readers

Wiring

Connection to a control

unit reader port

WHITE labelled control units provide 5V at the Red terminal. The Red power wire

for the reader should therefore be directly connected to the 12V supply terminal.

Cable extensions

Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.

Technical Help

Here is the list of topics about this product that receive the most technical support enquiries.

We list them here to help you speed up the installation and trouble shooting process.

1 - Readers/Keypads not working.

Q- Software settings - Conrm that the settings of the reader or keypad are correct.
Q- Connections - Check the wiring and integrity of the connectors. If possible, test this reader on the other port.
Q- Extended cable - Belden 9540 should be used up to a maximum of 100 m. Twisted pair alarm cable should
Q not be used. To conrm that an extended reader cable is not at fault, wire the reader directly to the port.
Q- Supply voltage - Conrm that the voltage is within specication. (see table)
Q- User token - Conrm that the user token used for testing is OK by presenting it to a known working reader.
Q- Interference - Conrm whether the reader works when tested 'in hand' and not mounted on the wall.
Q PROXIMITY readers should not be mounted back to back or close to other RF devices.

2 - Readers / Keypads - Extending cable.

QOnly Belden CR9538 / 9540 can be used for cable extensions. CR9538 8 core up to 25 m, CR9540 10 core
Qfor 25-100 m (maximum). With CR9540, the two additional cores should be used to double up the power.

3 - Net2 - Using a door reader as a desktop reader.

QWhen there is no desktop reader on site it is possible to congure a door reader to operate as a desktop reader:
Q1 - Select the doors menu in the left hand Net2 pane.
Q2 - Click on the door you wish to change the reader to act as a desktop reader.
Q3 - Under the relevant reader tab, change the reader operating mode to 'Desktop Reader'.
Q4 - The PC displays 'Would you like to accept desktop reader events from this reader at the PC?' ; click 'Yes'
QNow when you present a blank or existing token to that reader it will act in the same way as a USB desktop
Qreader, enabling you to add new tokens or edit existing ones.

NOTE:QRemember to return the operating mode to the original setting once the cards have been read

Qor users will not be able to gain access through the reader.
QKP Reader - Ensure that Keypad type is set to 'None', otherwise the Desktop reader option will not be available.

4 - Net2. Two readers into one reader port.

QTwo readers can be wired in parallel. - Colour for Colour. This can be useful in situations such as a barrier where
Qdual height readers are required; one for cars, one for lorries.

5 - Net2. What to do if a user has no access - Check the reader LED's when a card is shown.

Q- No LED's - the reader has no power.
Q- No change in display - try the card on a known working reader. If there is still no response, replace the card.
Q- Green LED ashing when a card is presented; check relay 1 LED to check for activity and also the lock wiring.
Q- Red LED is ashing when a card is presented; check the validity of the user at the PC.
Q Check user's access level and ensure they should have access by clicking on Current Validity.
Q Check the 'Valid Until' date and conrm this has not expired.
Q- Reinstate the ACU from the doors screen. Select the ACU's you wish to reinstate and then click OK.

Specications

Environment

Operating temperatures - all items

Waterproof

Cable length

Electrical

Voltage

Current

Carrier frequency

Clock and data bit period

Dimensions

Read Range

Min

-35 °C

Min

10V DC 14V DC

Width

45 mm 100 mm

Token

60 mm 40 mm

Max

+66 °C

Max

130 mA

Height

Keyfob Hands Free Token

IPX7

3 metres

125 kHz

600 µs

Depth

20 mm

850 mm