Paxton PROXIMITY Mullion HID reader User Manual

21/12/2011

Ins-30158 PROXIMITY Mullion HIDTM reader

Technical Support

01273 811011

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

[e-mail]

Suitability

Wet environments

Compatible with hands free tokens

Fitting

Mounted on metal surface

Readers mounted together

Paxton

300 mm

between

readers

Cable extensions

Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.

Wiring

+12V DC
Red LED
Amber LED
Green LED
Data/data0

Clock/data1

Not required
0V

Connection to a Net2

ACU reader port

Token type and conguration

The reader will recognise 125 kHz HIDTM proximity tokens in format to produce a Wiegand output (26 to 50 bit) or
EM4100 tokens to produce a Clock and Data output.

The reader scans the rst token presented after power up and will match the reader mode to the format discovered.

If no token is read within 3 minutes of powering up, the reader will default to HIDTM. If you require EM4100
operation, power cycle the reader and present an EM4100 token within 3 minutes.

Once in HIDTM or EM4100 mode, the reader will remain in that format.

If used with Net2, the ACU reader port must be congured to read the correct data format.

Where Wiegand cards are used, you must set the correct data format (e.g. Wiegand 26 bits) in the ACU

reader port conguration or create a custom wiegand lter in the Net2 Server Conguration Utility. For further

information see: AN1010 - Conguring custom Wiegand formats < http://paxton.info/990 >

Specications

Electrical

Voltage

Current

Carrier frequency

Environment

Operating temperature

Waterproof

Cable length

Dimensions

Read Range

Min

10V DC

115 kHz 135 kHz

Min

-35 °C

IPX7

Width

45 mm 100 mm

Token

85 mm

Max

14V DC

130 mA

Max

+66 °C

Height

Hands Free Token

Not Compatible

Outdoor use

3 metres

Depth

20 mm

Paxton Access Ltd hereby declares that this product is in conformity with all the essential requirements of Directive
1999/5/EC. This equipment is intended for use in all EU and EFTA countries and all other countries worldwide.

The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596