Paxton PROXIMITY LCD reader demonstration unit User Manual
28/06/2011
Ins-30138 PROXIMITY LCD reader demonstration unit
Technical Support
01273 811011 support@paxton.co.uk
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Paxton
What's in the box?
PROXIMITY LCD reader demonstration stand
Figure 8 IEC power lead.
User keyfob
Documentation
Part Number
380-592
Qty
1
Net2Air USB dongle
Description
Page 1
Operation
This unit has been loaded with demonstration software to display the four stored
images in response to the presentation of a user token.
These images may be replaced by the user via the Net2Air dongle supplied with the
unit and an Uploader program available from our website.
Simply power up the unit and present any Paxton or EM4100 token.
The 'Present token' image will change to the next image in the user sequence and
after a short pause, return to the default 'Present token' image.
The user images are: Access granted, Enter PIN, Access denied.
The following pages contain full instruction issued with the PROXIMITY LCD reader
and the Net2Air USB dongle. There are also details on the LCD reader image
uploader.
These include the following procedures:
- Mounting the LCD reader.
- Commissioning.
- Default images.
- Creating and customising your own images.
- Installing the Net2Air USB dongle.
- Downloading the LCD reader image uploader.
Page 2
Ins-30091 PROXIMITY LCD reader
Technical Support
01273 811011 support@paxton.co.uk
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Suitability
Security-sensitive doors
Paxton
Wet environments
Mounted on metal surface
The full colour backlit LCD screen can be congured to display images
of the customer's choice. For example, an image using a company
name/logo could be used as the default display on each reader around
the site.
The reader comes with four preloaded images. These can be replaced
using a free uploader program available from our website via any
Net2Air USB bridge or a Net2Air USB dongle.
If you wish to update these images, you should ensure that you have
a suitable Net2Air device as one is NOT supplied with the reader.
Readers mounted together
Fitting
The LCD display is best positioned at eye level for ease
of reading.
It is mounted using the backplate and xings provided
and can be positioned to allow the display of portrait or
landscape images.
300mm
between readers
Fix the mounting plate to the wall, noting the position of
the orientation arrow (see diagram).
Make a hole in the wall to take the reader cable and
feed this through. Ensure there will be sufcient slack to
allow the reader to slide over the mounting plate during
installation.
Present the reader to the mounting plate so that the slots pass over the side tabs in the plate.
Slide the reader down the plate until the retaining pin clicks into position.
A tool is provided with the reader to depress this pin should the reader ever need to be removed.
Image display
The unit comes with four preloaded images. These relate to the 3 LED's (Green, Amber and Red) on a
standard Paxton reader plus a default image.
Once a token has been read, the control unit establishes the access permissions of that user. Access is
granted or denied as appropriate with the designated image displayed. For example, if access is denied
the image assigned could show "Please return to Reception".
Page 3
Loading...