Paxton Proximity 375-110, Proximity 373-110, Proximity 345-220, Proximity 371-110, Proximity 372-110 Installation Manual

Paxton

ins-20600

Proximity readers and Keypads

1

2

1

Mounting

1

3

Wiring

Installation guidelines

• Readers should be mounted a minimum of 300mm/12” apart and
not back to back.

• All Proximity (P) and and keypad proximity (KP) readers should
not be mounted on metal surfaces.

• Screw connector option - The unit should be mounted in
conjunction with an electrical backbox to achieve the required
clearance for the connector. If an adaptor plate (310-750) is tted,
the mountings on the backbox can also be used.

2

310-750-US

If a 75 series backbox adaptor kit (310-750-US) is tted, the mountings
on a backbox can also be used.

Technical Help

1 - Readers/Keypads not working.

• Software settings - Conrm that the settings of the reader or
keypad are correct.

• Connections - Check the wiring and integrity of the connectors. If
possible, test this reader on the other port.

• Extended cable - Belden 9538/9540 should be used up to a
maximum of 500 feet. Twisted pair alarm cable should not be
used. To conrm that an extended reader cable is not at fault, wire
the reader directly to the port.

• Supply voltage - Conrm that the voltage is within specication.
(see table)

3