Paxar 6063TM User Manual

AC ADAPTER OPERATING
INSTRUCTIONS

The Monarch® 6063™ AC Adapter provides continuous power to your
Monarch® Pathfinder® Ultra® Silver 6032™ and the Monarch®
Pathfinder® Ultra® Platinum 6039™ printers. You can use the adapter
instead of a rechargeable battery. The adapter plugs into any standard
grounded electrical outlet and allows you to print large volumes of labels
without switching or recharging the battery.

New Door

Power Supply

Power Cord

Adapter Pack

Kit Contents

The AC Adapter kit comes with

♦ a new battery compartment door with a notch in it.

♦ a power cord (domestic models only).

♦ an adapter pack.

♦ a power supply.

TC6063OI Rev. AD 1/08 ©2008 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.

All Rights Reserved.

Installing the Adapter

To install the adapter:

1. Press the button on the battery compartment door (located at the
bottom of the printer’s handle) and slide it open, pulling firmly. Pull
the door completely off the printer and lay it aside.

2. Pull the battery out of the compartment. Or, place your hand beneath

Battery
Compartment
Door

Button

the printer, turn the printer upright, and catch the battery in your hand
as it slides out.

3. Insert the adapter pack (connector end first) into the printer’s battery
compartment.

2 Installing the Adapter

Battery