Paxar 6032TM, 6039TM User Manual
PRINTER WALL REFERENCE
g
r
r
y
Pathfinder® Ultra® Silver (6032™) Printer Pathfinder® Ultra® Platinum (6039™) Printer
See the Equipment Manual for more information.
Loading Supplies in Peel Mode
1
Turn on the printer and put Press the latch buttons Open the spring-loaded Insert the supply roll so it
2
3 4
it into load mode. and open the supply cover. supply holder. feeds from the bottom.
6032: Press the Load Key.
6039: Select the supply loading
Supply Cover
option from the display
screen.
Or, ask your System
Administrator.
Latch Buttons
5 6
Peel four inches of labels Pull the Label Deflector down.
from the backing paper.
8
Push the Label Deflector Pull the backing paper
up until it snaps into place.
10
7
Label Label Deflector
Deflector
Feed all four inches of the backin
over
the peel bar, and under the label deflector.
paper unde
11
over
down to the Pinch and Close the
the Guide Roller,
the applicator roller,
Applicator Roller
Peel Bar
9
Partially close the cove
Feed Rollers. cover and
to the first position. Press the trigger. press ESC or
Guide Roller previous menu.
(behind supply)
Cleaning Your Printer NOTE: Always turn off the printer before cleaning.
Platen Roller Pinch and Feed Rollers Printhead Printer Flex Cable
return to the
Pinch and
Feed Rollers
Buildup
Cable
Use a dry, soft-bristle brush. Use a dry, lint-free cloth. Use a cleaning pen or a Use a soft cloth, lightly
soft cloth, lightly moistened moistened with
with 91% Isopropyl Alcohol. 91% Isopropyl Alcohol.
Platinum Displa
Screen
On-Demand Sensor Scanner Window Black Mark Sensor
Adhesive
Display
Screen On-Demand
Sensor
Pull the
Label Deflector
down.
Use a soft cloth, lightly Use a dry cotton swab. Use a soft cloth, lightly Use a dry cotton swab.
moistened with water. moistened with water.
TC603XWC Rev. AD 1/08 ©2003 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All Rights Reserved.
PRINTER WALL REFERENCE
y
r
y
Pathfinder® Ultra® Silver (6032™) Printer Pathfinder® Ultra® Platinum (6039™) Printer
See the Equipment Manual for more information.
Loading Supplies in Non-Peel Mode
1
Turn on the printer and put Press the latch buttons and open Open the spring-loaded supply holder.
2 3
it into load mode. the supply cover.
6032: Press the Load Key.
6039: Select the supply loading
option from the display
screen.
Or, ask your System
Administrator.
Supply Cover
Latch Buttons
Insert the supply roll so it
feeds from the bottom.
Feed the suppl
5
the Applicator Roller and above
Label Deflector
out the front of the printer, unde
the Label Deflector.
Applicator Roller
64
Close the supply cover and press ESC
or return to the previous menu.
Cleaning Your Printer NOTE: Always turn off the printer before cleaning.
Platen Roller Pinch and Feed Rollers Printhead Printer Flex Cable
Adhesive
Buildup
Cable
Use a dry, soft-bristle brush. Use a dry, lint-free cloth. Use a cleaning pen or a Use a soft cloth, lightly
soft cloth, lightly moistened moistened with
with 91% Isopropyl Alcohol. 91% Isopropyl Alcohol.
Platinum Displa
Screen
On-Demand Sensor Scanner Window Black Mark Sensor
Display
Screen On-Demand
Sensor
Pull the
Label Deflector
down.
Use a soft cloth, lightly Use a dry cotton swab. Use a soft cloth, lightly
moistened with water. moistened with water. Use a dry cotton swab.
TC603XWC Rev. AD 1/08 ©2003 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All Rights Reserved.
Loading...