LED Work Light
CLK
CLK
CLK6C-24AG-CD
6LJQDO7RZHU
CLK3C-24SG-CD
The CLK Series was designed especially for the machine tool industry
where oil, oil mist, other cutting fluids and debris is constantly present
(rated IP66G and IP67G). It has the lowest, space saving profile in the
industry but puts out up to 2100 lx, illuminating large areas. The
aluminum or stainless steel body and tempered glass protect the unit
from hot flying debris. Various lengths are available along with the
capability to daisy link them so that the CLK can be used in various
equipment sizes.
A stainless steel with acrylic lens unit that is rated IP69K is also
available for the food, beverage and pharmaceutical industries where
high-pressure and high-temperature wash down is required.
● Cable or M12 connection methods
● 24V DC rated voltage
● -30o to +60oC operating temperature range
6LJQDO/LJKW
5HYROYLQJ
:DUQLQJ/LJKW
&XEH7RZHU
$XGLEOHV
+\EULG
'HYLFHV
6LJQDOLQJ
/('
,OOXPLQDWLRQ
CLK3C-24AG-CN
CLK2S-24AG-CD
IP66G
*UL standards are AG (aluminum) specifications only
IP67G
IP69K
RoHS
UL
Specifications
Model
CLK2S-24AG-CD
CLK3S-24AG-CD
CLK3S-24AG-CN
CLK6S-24AG-CD
CLK2C-24AG-CD+FL005
CLK3C-24AG-CD
CLK3C-24AG-CN
CLK6C-24AG-CD
CLK3C-24SG-CD
CLK3C-24SG-CN
Cable length
Connection method
0.5m
Cable takeout
M12
connector
Luminous Color
Daylight color
Daylight color
Neutral white
Daylight color
Daylight color
Daylight color
Neutral white
Daylight color
Daylight color
Neutral white
Rated Voltage
24V DC
Operating Voltage
Range
24V
DC±10%
Power
Consumption
8.4W
12.5W
25W
8.4W
12.5W
25W
12.5W
●IP6X=
●IPX6=
●IPX 7=
●IPXXG=
●IPX9 K=
The product is placed in a dust chamber with a negative pressure state
so
that dust is made to float for 8 hours, and there is no invasion inside.
A water nozzle with a diameter of 12.0mm is placed at a range from
2.5 to
3.0 meters with a water velocity of 100 litres per minute injected
towards the
test piece in an omni-direction for three minutes or more without being
affected by any harmful influences.
The outline of the product is submerged at a distance of 1m from the
bottom
of a tank, and it is held submerged for 30 minutes.
A non-water soluble N3 class No. 8 as specified in JIS K2241 (for
coolants) is
dropped on top of the upper part of a product at a rate of 0.5L/h for 48
hours.
IPX9K is the German DIN 40050 PART9 standard. It is defined as a
protection regulation for high temperature and high-pressurized water.
Water is heated up to 80 and sprayed at a water pressure in the range
from
80 to 100 BARs at 14 to 16 liters per minute at the test object.
The test object is at a distance of 100 to 150 mm from the nozzle and
sprayed in all directions at 0, 30, 60, and 90 degrees, then sprayed at
a
horizontal angle while it is being rotated, all done for a period of 30
seconds
without being affected by water penetration.
Passed dust-proof, water resistance, and oil-proof tests listed below:.
Size of
light-emitting
component
200mm
300mm
600mm
200mm 820lx
300mm
600mm
300mm
Central
illuminance
(at 1m)
820lx
1,200lx
2,100lx
1,200lx
2,100lx
1,200lx
Total luminous
flux
865lm
1,300lm
2,600lm
865lm
1,300lm
2,600lm
1,300lm
Body
materials
Waterproof and
oil-proof type/
Aluminum alloy
Waterproof and
highly anti-corrosive/
SUS316
Light-emitting
component with
transparent front surface
Tempered glass
Operating Temperature
Range
-40℃ ~+60℃
(90%RH or
less)
Protection
IP66G/
Rating
67G/
69K
Mass
450g
600g
1,070g
450g
600g
1,070g
1,490g
2SWLRQV 1HWZRUN
177
Loading...