Patlite CLA Catalog Page
LED Work Light
CLA
CLA
6LJQDO7RZHU
The CLA Series is built for use in high-pressure, high-temperature
cleaning and sub-zero environments. The rugged polycarbonate
construction means there is no glass or other contamination to be
concerned about. Its various lengths allow it to be used in small and
large areas and the daylight color temperature enables objects to be
seen clearly.
●First in industry (based on self investigation) IP66, IP67 and IP69K rated
LED work light
- Ideal for use in wet or high-pressure, high-temperature applications in
food processing, beverage, and pharmaceutical industries.
●34% less heat generated compared to 20W fluorescent lights, thus
keeping the work environment cooler.
●Ultra-bright, maintenance-free LEDs
CLA-CD (daylight color: 6800K)
6LJQDO/LJKW
5HYROYLQJ
:DUQLQJ/LJKW
&XEH7RZHU
$XGLEOHV
+\EULG
'HYLFHV
6LJQDOLQJ
/('
,OOXPLQDWLRQ
IP66
IP67
IP69K
Specifications
Model
CLA1S-24-CD
CLA1S-24-CD-30
CLA2S-24-CD
CLA2S-24-CD-30
CLA3S-24-CD
CLA3S-24-CD-30
CLA3S-24-Y
CLA6S-24-CD
CLA6S-24-CD-30
CLA9S-24-CD
CLA9S-24-CD-30
CLA12S-24-CD Daylight color
CLA12S-24-CD-30 Daylight color
Light source color
Daylight color
Daylight color
Daylight color
Daylight color
Daylight color
Daylight color
Amber
Daylight color
Daylight color
Daylight color
Daylight color
RoHS
Rated
Voltage
24V DC
(has
polarity)
UL
Voltage Range
24V DC±10%
Operating
CLA-Y (Amber)
*CLA3S type only
Rated Current
Consumption
104mA
208mA
240mA
480mA
720mA
960mA
●IP6X=
●IPX6=
●IPX 7=
●IPX9 K=
Passed dust-proof and water resistance tests listed below:
Central
Illuminance
(lx/50cm)
140
270
400
220
650
810
890
Materials
Polycarbonate
The product is plac ed in a dust chamber with a negative pressure state so that
dust is made to float for 8 hours, and there is no invasion inside.
A water nozzle with a diameter of 12.0mm is placed at a range from 2.5 to 3.0
meters with a water velocity of 10 0 litres per minute injected towards the test
piece in an omni-direction for three minutes or more without being affected by
any harmful influences.
The outline of the product is submerged at a distance of 1m from the bottom of a
tank, and it is held submerged for 30 minutes.
A non-water soluble N3 class No. 8 as specified in JIS K2241 (for coolants) is
dropped on top of the upper part of a product at a rate of 0.5L/h for 48 hours.
IPX9K is the German DIN 40050 PART9 standard. It is defined as a protection
regulation for high temperature and high-pressurized water.
Water is heated up to 80 and sprayed at a water pressure in the range from 80
to 100 BARs at 14 to 16 liters per minute at the test object.
The test object is at a distance of 100 to 150 mm from the nozzle and sprayed in
all directions at 0, 30, 60, and 9 0 degrees, then sprayed at a horizontal angle
while it is being rotated, all done for a period of 30 sec onds without being
affected by water penetration.
Body
Cover:
Operating
Temperature
Range
-40℃ - +60℃
(90%RH or less,
no condensation)
Mounting direction
specification)
All Directions
(indoor use)
(Mounting
Protection
Rating
IP66/
67/69K
Vibration
Resistance
19.6m/s
Cable
Mass
length
0.5m
80ｇ
3.0m
0.5m
130ｇ
3.0m
0.5m
3.0m
180ｇ
2
340ｇ
500ｇ
660ｇ
0.5m
0.5m
3.0m
0.5m
3.0m
0.5m
3.0m
2SWLRQV 1HWZRUN
173
Loading...