Paten Wireless Technology AMW10 Users Manual
5-Button Rechargeable
Wireless Optical Mouse
Making Your Mobile Life Easier.
Features and specifications are subject to change without notice.
© 2005, Targus Group International, Inc. and Targus Inc.
BRUSSELS HANNOVER BARCELONA TOKYO MILAN AMSTERDAM SINGAPORE LONDON PARIS NEW YORK LOS ANGELES TORONTO HONG KONG SYDNEY
Visit our Web site at: www.targus.com
AMW10US / 400-0281-001A
®
USER’S GUIDE
Making Your Mobile Life Easier.
®
WIRELESS
RECHARGEABLE MOUSE
FOR DESKTOP
Introduction
Congratulations on your purchase of the Targus Wireless
Rechargeable Mouse. This mouse offers a charge cable to
ensure continuous use without power interruption and an
extension seat that allows connectivity for the receiver and
the charge cable. The 4th & 5th buttons are preprogrammed to provide Internet Backward and Internet
Forward under Windows
Contents
• Wireless Rechargeable Mouse
• USB Receiver
• 2 AA NiMH Rechargeable Batteries
•USB Extension Seat
• USB Charge Cable
• User’s Guide
System Requirements
Hardware
• USB version 1.1 or 2.0 interface
Operating System
•Windows® 2000/XP
®
2000/XP.
2
Wireless Rechargeable Mouse for Desktop
Charge port
computer
Extension seat
To
Charge
cable
Using the Extension Seat
An extension seat is provided to minimize interference from
other wireless devices. This extension seat allows you to
place the receiver closer to your mouse while in use.
1 Connect the extension seat to an available USB port on
your Desktop PC or Notebook.
2 Plug the receiver into the USB port labeled 'receiver'
located at the top of the seat.
3 Connect the USB end of the charge cable to the port
labeled 'charge' on the extension seat.
Your computer’s operating system automatically detects
the new hardware and begins installing the appropriate
drivers.
4 If applicable, follow any on-screen instructions to
complete the driver installation.
3
Wireless Rechargeable Mouse for Desktop
Tab
Battery cover
Optical
sensor
For best results, you should charge the mouse via the
supplied USB charge cable for at least 8 hours
before using it. See “Charging the Mouse” on page 5.
Installing the Batteries
1 Remove the battery cover from the bottom of the mouse
by pressing the tab located on the bottom and lifting it
off.
Bottom of mouse
2 2 AA NiMH rechargeable batteries are included. Insert
the supplied batteries, making sure that the positive (+)
and negative (-) ends of each battery match the polarity
indicators inside the battery housing.
WARNINGS: Use ONLY heavy-duty NiMH batteries.
Never use alkaline if you intend to use the recharging
feature.
Avoid mixing new and used batteries in a device.
3 Slide the battery cover back into position until it “clicks”
firmly into place.
The optical sensor, located on the bottom of the mouse,
glows red.
4
Loading...