Page 1
®
MODEL 1000 SR Series
®
Staplers
IMPORTANT
DO NOT DESTROY
It is the customer’s responsibility to have
all operators and service personnel read
and understand this manual.
Operating and
Maintenance Manual
Page 2
PARTS
LEGEND
Narrow Crown
1000-N30SR, 500017 1000-N50SR, 500018
Drives 30 gauge staples Drives 50 gauge staples
up to 3/4" in length. up to 3/4" in length.
5/32" crown size. 5/32" crown size.
Standard Crown
1000-S30SR, 500019 1000-S50SR, 500020
Drives 30 gauge staples Drives 50 gauge staples
up to 5/8” in length. up to 5/8" in length.
9/32" crown size. 9/32" crown size.
Wide Crown
1000-W30SR, 500021 1000-W50SR, 500022
Drives 30 gauge staples Drives 50 gauge staples
up to 5/8" in length. up to 5/8" in length.
1/2" crown size. 1/2" crown size.
1 500023 1 Cap
2 403906 1 Cap Gasket
3 500024 1 Sleeve Spacer
4 403918 1 O-Ring, Piston
* 5 500241 1 Driver Blade (N30)
500240 1 Driver Blade (N50)
500242 1 Driver Blade (S30)
500243 1 Driver Blade (S50)
500244 1 Driver Blade (W30)
500245 1 Driver Blade (W50)
* 6 403920 1 O-Ring, Upper
7 500025 1 Sleeve
* 8 403921 1 O-Ring
* 9 403909 1 Bumper
10 500026 1 Housing
11 403962 2 Logo, Housing
*12 500041 3 O-Ring
*13 403917 2 O-Ring, Valv e Piston
14 500030 1 Valve Piston
15 403966 1 Buffer
16 500040 1 O-Ring, V alve Piston
17 500031 1 Valve Stud
18 500032 1 Spring, V alve Pin
*19 500042 1 O-Ring, Valv e Pin
20 500033 1 Valve Pin
*21 500034 1 Seat, Valve Pin
22 500037 1 Trigger Pin
23 500035 1 Trigger Plate
24 500038 1 Retainer, Trigger Pin
➔ 25 500043 1 F.H.C.S. M4 x 12
26 500036 1 Trigger
27 500029 1 Valve Sleeve
*28 500039 1 O-Ring, Valve Sleeve
29 500080 1 S.H.C.S. M5 x14
30 403924 2 Spirol Pin
31 403907 1 Quick Release Latch
32 403922 1 Nut, Self Locking
33 403910 1 Air Diffuser
34 500028 1 Air Diffuser Retainer
35 500083 1 End Plug
▲36 403927 4 S.H.C.S. M4 x 14
37 403923 4 Lockwasher
38 500046 1 Front Guide (N30)
500048 1 Front Guide (N50)
500052 1 Front Guide (S30)
500054 1 Front Guide (S50)
500058 1 Front Guide (W30)
500060 1 Front Guide (W50)
39 500027 1 Back Plate
**40 403960 1 Warning Label
41 500050 1 Housing, Rail Assembly (N)
500056 1 Housing, Rail Assembly (S)
500062 1 Housing, Rail Assembly (W)
42 403901 1 Rail Stop (N)
403963 1 Rail Stop (S,W)
43 403959 1 Rail Latch (N.S)
403944 1 Rail Latch (W)
44 403908 1 Torsion Spring, Rail Latch
45 403936 1 Follower (N)
403946 1 Follower (S)
403954 1 Follower (W)
46 403935 1 Compression Spring,Follower(N)
403945 1 Extension Spring,Follower (S,W)
47 500049 1 Rail Assembly (N)
500055 1 Rail Assembly (S)
500061 1 Rail Assembly (W)
48 403925 1 Spirol Pin (N)
49 403932 1 Guide Bar, Follower Spring(N)
50 403964 2 Follower Insert (N)
51 500246 1 Piston
52 500247 1 Pin
➔53 500763 1 O-Ring
* Denotes Normal Wear Items
** Note: Make sure Warning Label (403960) is properly affixed.
Replace if necessary. Label available at no charge through the Service Dept.
▲ Apply loctite 242 (Blue) Part No. 093500
➔ Denotes new change
Page 3
1000-N30 SR
500017
1000-N50 SR
500018
1000-S30 SR
500019
1000-S50 SR
500020
1000-W30 SR
500021
1000-W50 SR
500022
WARNING
All parts must be periodically inspected
and repalced if worn or broken. Failure to
do this can affect the tool’s operation and
present a safety hazard.
53
For: S & W
For: N
Loading...