PASCO ME-9885A User Manual

Instruction Manual

No. 012-09743A

Magnetic Bumper Set

ME-9885A

Magnetic

Bumpers (2)

Included Equipment Part Number

Magnetic Bumper (2) 003-09567

Additional Equipment Recommended

Force Accessory Bracket CI-6545

Force Sensors CI-6537, CI-6746 or PS-2104

PASCO carts ME-6951, ME-6950 or

ME-9454

Introduction

The Magnetic Bumper Set includes a pair of strong magnetic bumpers. These bumpers are
ideal for measuring forces during elastic collisions between carts. Simply remove the hooks
on the Force Sensors and replace with the magnetic bumpers. The bumper has a metal post
which assures that it is mounted in the correct orientation.

Magnetic Bumper Set Suggested Activities

Suggested Activities

Elastic Collisions

1. Remove the hooks from both Force Sensors

2. Screw a Magnetic Bumper into each of the sensors, Note

the location of the alignment post on the bumpers and the
hole on the sensor face.

3. Connect the Force Sensors to PASCO carts or Force
Accessory Bracket

Limited Warranty

For a description of the product warranty, see the PASCO catalog.

Contacting Technical Support

Address: PASCO scientific

10101 Foothills Blvd.

Roseville, CA 95747-7100

Web: www.pasco.com

Tech Support: [e-mail]

Phone: [phone]

[phone]

Copyright Notice

The PASCO scientific 012-09743A Magnetic Bumper Set Instruction Manual
is copyrighted with all rights reserved.

2

®